Key Technologies for Ultra-smooth Fabrication of Aspheric Silicon Carbide Mirrors
Research Seminar Series
-
Date
19 Nov 2026
-
Organiser
Department of Industrial and Systems Engineering, PolyU
-
Time
11:15 - 12:30
-
Venue
R507
Speaker
Prof. Xiaolin Yin
Remarks
If you have enquiries regarding E-certificate after the seminar, please contact david.kuo@polyu.edu.hk.
Summary
Reaction-bonded silicon carbide (RB-SiC) is a promising material for aspheric mirrors in high-power laser systems because of its high specific stiffness and thermal stability. However, the SiC and free-silicon phases respond differently to polishing, making it difficult to obtain a uniform ultra-smooth substrate surface; substrate topography and deposition defects can also affect the quality and subsequent processability of a polysilicon modification layer. This seminar presents a manufacturing route spanning RB-SiC substrate polishing, polysilicon modification, and precision finishing of the modified aspheric surface. Fenton oxidation-assisted polishing and pressure control are used to improve substrate microroughness while preserving aspheric form. The effects of substrate microtopography and magnetron-sputtering conditions on modification-layer quality are examined, together with the manifestation of shadowing-related and particle-induced defects during subsequent processing. The roles and trade-offs of deterministic figuring, smoothing, magnetorheological finishing, and ion-beam figuring are then analyzed across different spatial-frequency ranges. A combined-process route has been established for modified aspheric silicon surfaces, coordinating these processes to control form error, waviness, and high-frequency surface quality in the ultra-smooth manufacturing of RB-SiC mirrors.
Keynote Speaker
Prof. Xiaolin Yin
Director
Advanced Optical Manufacturing and Application Center, Haining High-Tech Research Institute, China
Dr Xiaolin Yin is an Associate Professor and Director of the Advanced Optical Manufacturing and Application Center at Haining High-Tech Research Institute, China. He received his PhD in Optical Engineering from the University of Chinese Academy of Sciences in 2017. His research focuses on ultra-precision optical manufacturing, particularly large-aperture aspheric optics and ion-beam figuring equipment. Before joining Haining High-Tech Research Institute, he worked at Jihua Laboratory and the Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences. He has led a sub-project under China’s National Key Research and Development Program on precision structural ceramics for high-end lithography equipment. His research output includes six SCI- and EI-indexed papers and more than 20 authorized Chinese invention patents.
You may also like
