Skip to main content Start main content

Key Technologies for Ultra-smooth Fabrication of Aspheric Silicon Carbide Mirrors

Research Seminar Series

20261119_Xiaolin Yin_event image
  • Date

    19 Nov 2026

  • Organiser

    Department of Industrial and Systems Engineering, PolyU

  • Time

    11:15 - 12:30

  • Venue

    R507  

Speaker

Prof. Xiaolin Yin

Remarks

If you have enquiries regarding E-certificate after the seminar, please contact david.kuo@polyu.edu.hk.

20261119_Xiaolin Yin_poster

Summary

Reaction-bonded silicon carbide (RB-SiC) is a promising material for aspheric mirrors in high-power laser systems because of its high specific stiffness and thermal stability. However, the SiC and free-silicon phases respond differently to polishing, making it difficult to obtain a uniform ultra-smooth substrate surface; substrate topography and deposition defects can also affect the quality and subsequent processability of a polysilicon modification layer. This seminar presents a manufacturing route spanning RB-SiC substrate polishing, polysilicon modification, and precision finishing of the modified aspheric surface. Fenton oxidation-assisted polishing and pressure control are used to improve substrate microroughness while preserving aspheric form. The effects of substrate microtopography and magnetron-sputtering conditions on modification-layer quality are examined, together with the manifestation of shadowing-related and particle-induced defects during subsequent processing. The roles and trade-offs of deterministic figuring, smoothing, magnetorheological finishing, and ion-beam figuring are then analyzed across different spatial-frequency ranges. A combined-process route has been established for modified aspheric silicon surfaces, coordinating these processes to control form error, waviness, and high-frequency surface quality in the ultra-smooth manufacturing of RB-SiC mirrors.

Keynote Speaker

Prof. Xiaolin Yin

Prof. Xiaolin Yin

Director
Advanced Optical Manufacturing and Application Center, Haining High-Tech Research Institute, China

Dr Xiaolin Yin is an Associate Professor and Director of the Advanced Optical Manufacturing and Application Center at Haining High-Tech Research Institute, China. He received his PhD in Optical Engineering from the University of Chinese Academy of Sciences in 2017. His research focuses on ultra-precision optical manufacturing, particularly large-aperture aspheric optics and ion-beam figuring equipment. Before joining Haining High-Tech Research Institute, he worked at Jihua Laboratory and the Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences. He has led a sub-project under China’s National Key Research and Development Program on precision structural ceramics for high-end lithography equipment. His research output includes six SCI- and EI-indexed papers and more than 20 authorized Chinese invention patents.

Your browser is not the latest version. If you continue to browse our website, Some pages may not function properly.

You are recommended to upgrade to a newer version or switch to a different browser. A list of the web browsers that we support can be found here