繁體
Start main content

Publications in 2019

  1. Bai, PF; Yang, XC; Shen, XM; Zhang, XN; Li, ZZ; Yin, Q; Jiang, GL; Yang, F. (2019) “Sound absorption performance of the acoustic absorber fabricated by compression and microperforation of the porous metal”, MATERIALS & DESIGN, 167, 107637.
  2. Xu, P; Cheung, BCF; Li, B. (2019) “A Complete, Continuous, and Minimal Product of Exponentials-Based Model for Five-Axis Machine Tools Calibration With a Single Laser Tracker, an R-Test, or a Double Ball-Bar”, JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 141(4), 41010.
  3. Wang, SX; Cheung, CF; Liu, MY. (2019) “A fiducial-aided data fusion method for the measurement of multiscale complex surfaces”, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 103(1-4), p.1381-p.1389.
  4. Zhao, ZJ; To, S; Yip, WS; Zhuang, ZX. (2019) “A rapid method for grain growth of Ti6Al4V alloy and its machinability”, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 104(5-8), p.2347-p.2361.
  5. Zhang, SJ; Li, Z; Xiong, ZW; To, S. (2019) “A theoretical and experimental study of forced spindle vibration under unbalanced magnetic forces in ultra-precision machining”, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 103(9-12), p.4689-p.4694.
  6. Zhang, SJ; Zhou, YP; Zhang, HJ; Xiong, ZW; To, S. (2019) “Advances in ultra-precision machining of micro-structured functional surfaces and their typical applications”, INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 142, p.16-p.41.
  7. Li, GJ; Mo, XY; Wang, YL; Chan, CY; Chan, KC. (2019) “All 3D-Printed Superhydrophobic/Oleophilic Membrane for Robotic Oil Recycling”, ADVANCED MATERIALS INTERFACES, 6(18), 1900874.
  8. Sun, ZW; To, S; Wang, SJ. (2019) “An analytical force model for ultra-precision diamond sculpturing of micro-grooves with textured surfaces”, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 160, p.129-p.139.
  9. Sun, ZW; To, S; Yu, KM. (2019) “An investigation in the ultra-precision fly cutting of freeform surfaces on brittle materials with high machining efficiency and low tool wear”, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 101(5-8), p.1583-p.1593.
  10. Ji, RJ; Zheng, Q; Liu, YH; To, S; Yip, WS; Yang, ZL; Jin, H; Wang, HY; Cai, BP; Cheng, WH. (2019) “An investigation of mechanical-thermal coupling treatment on material properties, surface roughness, and cutting force of Inconel 718”, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 105(5-6), p.1917-p.1931.
  11. Yip, WS; To, S. (2019) “Control of the ductile and brittle behavior of titanium alloys in diamond cutting by applying a magnetic field”, SCIENTIFIC REPORTS, 9, 4056.
  12. Zhu, ZW; To, S; Zhu, WL; Huang, P; Zhou, XQ. (2019) “Cutting forces in fast-/slow tool servo diamond turning of micro-structured surfaces”, INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 136, p.62-p.75.
  13. Yip, WS; To, S; Wang, WK. (2019) “Design of an optical lens for LED lighting using a hybrid principal components analysis-Taguchi method”, LIGHTING RESEARCH & TECHNOLOGY, 51(5), p.788-p.802.
  14. Liu, MY; Cheung, CF; Feng, XB; Wang, CJ. (2019) “Diamond machining of freeform-patterned surfaces on precision rollers”, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 103(9-12), p.4423-p.4431.
  15. Meng, ZG; Xiao, F; Wei, ZX; Guo, XY; Zhu, Y; Liu, YR; Li, GJ; Yu, ZQ; Shao, MH; Wong, WY. (2019) “Direct synthesis of L1(0)-FePt nanoparticles from single-source bimetallic complex and their electrocatalytic applications in oxygen reduction and hydrogen evolution reactions”, NANO RESEARCH, 12(12), p.2954-p.2959.
  16. Zhou, J; Li, LH; Ng, MC; Lee, WB. (2019) “Effect of molding machine's stiffness on the thickness of molded glass rings”, INTERNATIONAL JOURNAL OF APPLIED GLASS SCIENCE, 10(4), p.584-p.597.
  17. Zhao, Z; Dong, ZW; Wu, HB. (2019) “Effect of particle size on the ultraprecision polishing process of titanium alloy Ti6Al4V”, PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 233(13), p.4490-p.4496.
  18. Pei, L; Wu, HB. (2019) “Effect of ultrasonic vibration on ultra-precision diamond turning of Ti6Al4V”, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 103(1-4), p.433-p.440.
  19. Zhang, QL; Guo, N; Chen, Y; To, S. (2019) “Effects of binder concentration on the nanometric surface characteristics of WC-Co materials in ultra-precision grinding”, INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 85, 105048.
  20. Zhao, ZJ; To, S; Xiao, GB; Jelenkovic, EV. (2019) “Effects of cutting angles on deformation of single crystal silicon in plunge cutting along < 1 0 0 > direction”, MATERIALS LETTERS, 253, p.234-p.237.
  21. Zhao, ZJ; To, SE; Wang, JW. (2019) “Effects of grains and twins on deformation of commercial pure titanium in ultraprecision diamond turning”, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 271, p.10-p.22.
  22. Yip, WS; To, S. (2019) “Effects of magnetic field on microstructures and mechanical properties of titanium alloys in ultra-precision diamond turning”, MATERIALS RESEARCH EXPRESS, 6(5), 56553.
  23. Sun, ZW; To, SE; Yu, KM. (2019) “Feasibility investigation on ductile machining of single-crystal silicon for deep micro-structures by ultra-precision fly cutting”, JOURNAL OF MANUFACTURING PROCESSES, 45, p.176-p.187.
  24. Sun, ZW; To, S; Zhang, GQ; Zhang, SJ. (2019) “Flexible fabrication of micro-optics arrays with high-aspect-ratio by an offset-tool-servo diamond machining system”, OPTICS EXPRESS, 27(7), p.9631-p.9646.
  25. Liu, MY; Cheung, CF; Feng, X; Ho, LT; Yang, SM. (2019) “Gaussian process machine learning-based surface extrapolation method for improvement of the edge effect in surface filtering”, MEASUREMENT, 137, p.214-p.224.
  26. Lu, GX; Liu, H; Lin, CH; Zhang, Z; Shukla, P; Zhang, YK; Yao, JH. (2019) “Improving the fretting performance of aero-engine tenon joint materials using surface strengthening”, MATERIALS SCIENCE AND TECHNOLOGY, 35(15), p.1781-p.1788.
  27. Yang, HP; Zhang, X; Chen, P; Fu, MW; Wang, GC; To, S. (2019) “Investigation on the enhanced maximum strain rate sensitivity (m) superplasticity of Mg-9Li-1Al alloy by a two-step deformation method”, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 764, 138219.
  28. Han, JD; Li, LH; Lee, W. (2019) “Machining of Lenticular Lens Silicon Molds with a Combination of Laser Ablation and Diamond Cutting”, MICROMACHINES, 10(4), 250.
  29. Zhao, ZJ; To, S; Sun, ZW; Ji, RJ; Yu, KM. (2019) “Microstructural effects of Ti6Al4V alloys modified by electropulsing treatment on ultraprecision diamond turning”, JOURNAL OF MANUFACTURING PROCESSES, 39, p.58-p.68.
  30. Zhang, SJ; Li, Z; Xiong, ZW; To, S. (2019) “Microwave formation mechanisms in surface generation of ultra-precision machining”, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 104(1-4), p.1239-p.1244.
  31. Li, LH; Chan, MK; Lee, WB; Ng, MC; Chan, KL. (2019) “Modeling and experimental performance analysis of a novel heating system and its application to glass hot embossing technology”, OPTICS LETTERS, 44(14), p.3454-p.3457.
  32. Zhu, ZW; To, S; Tong, Z; Zhuang, ZX; Jiang, XQ. (2019) “Modulated diamond cutting for the generation of complicated micro/nanofluidic channels”, PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 56, p.136-p.142.
  33. Zhao, CY; Cheung, CF; Liu, MY. (2019) “Nanoscale measurement with pattern recognition of an ultra-precision diamond machined polar microstructure”, PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 56, p.156-p.163.
  34. Chen, S; Cheung, C.F;Zhang, F; Liu, M. (2019) “Optimization of Tool Path for Uniform Scallop-Height in Ultra-precision Grinding of Free-form Surfaces”, Nanomanufacturing and Metrology, 2(4), p.215-p.224.
  35. Yang, XC; Shen, XM; Bai, PF; He, XH; Zhang, XN; Li, ZZ; Chen, L; Yin, Q. (2019) “Preparation and Characterization of Gradient Compressed Porous Metal for High-Efficiency and Thin-Thickness Acoustic Absorber”, MATERIALS, 12(9), 1413.
  36. Yip, WS; To, S. (2019) “Reduction of Minimum Cutting Thickness of Titanium Alloys in Micro Cutting by a Magnetic Field Assistance”, IEEE ACCESS, 7, p.152034-p.152041.
  37. Yip, WS; To, S. (2019) “Reduction of tool tip vibration in single-point diamond turning using an eddy current damping effect”, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 103(5-8), p.1799-p.1809.
  38. Zhang, QL; Zhang, Z; Su, HH; Zhao, QL; To, S. (2019) “Role of Si in the Surface Damage Mechanism of RB-SiC/Si Under Mechanical Loading”, JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 28(1), p.254-p.262.
  39. Zhao, ZJ; To, S; Zhuang, ZX. (2019) “Serrated Chips Formation in Micro Orthogonal Cutting of Ti6Al4V Alloys with Equiaxial and Martensitic Microstructures”, MICROMACHINES, 10(3), 197.
  40. Zhang, GQ; To, S; Wu, XY; Lou, Y. (2019) “Steady tool wear and its influence on tool geometry in ultra-precision fly cutting of CuZn30”, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 101(9-12), p.2653-p.2662.
  41. Hu, KM; Lo, SL; Wu, HB; To, S. (2019) “Study on Influence of Ultrasonic Vibration on the Ultra-Precision Turning of Ti6Al4V Alloy Based on Simulation and Experiment”, IEEE ACCESS, 7, p.33640-p.33651.
  42. Chen, SS; Fai, CC; Zhang, FH; Ting, HL; Zhao, CY. (2019) “Theoretical and experimental investigation of a tool path control strategy for uniform surface generation in ultra-precision grinding”, INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 103(9-12), p.4307-p.4315.
  43. Yip, WS; To, S. (2019) “Theoretical and Experimental Investigations of Tool Tip Vibration in Single Point Diamond Turning of Titanium Alloys”, MICROMACHINES, 10(4), 231.
  44. Zhang, GQ; Dai, YQ; To, S; Wu, XY; Lou, Y. (2019) “Tool interference at workpiece centre in single-point diamond turning”, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 151, p.1-p.12.
  45. Fang, FZ; Zhang, N; Guo, DM; Ehmann, K; Cheung, B; Liu, K; Yamamura, K. (2019) “Towards atomic and close-to-atomic scale manufacturing”, INTERNATIONAL JOURNAL OF EXTREME MANUFACTURING, 1(1), 12001.
  46. Zhu, ZW; Tong, Z; To, S; Jiang, XQ. (2019) “Tuned diamond turning of micro-structured surfaces on brittle materials for the improvement of machining efficiency”, CIRP ANNALS-MANUFACTURING TECHNOLOGY, 68(1), p.559-p.562.

 

We use Cookies to give you a better experience on our website. By continuing to browse the site without changing your privacy settings, you are consenting to our use of Cookies. For more information, please see our Privacy Policy Statement.

Your browser is not the latest version. If you continue to browse our website, Some pages may not function properly.

You are recommended to upgrade to a newer version or switch to a different browser. A list of the web browsers that we support can be found here