1 PAN, Z.F., AN, L., ZHAO, T.S. and TANG, Z.K., “Advances and Challenges in Alkaline Anion Exchange Membrane Fuel Cells”, Progress in Energy and Combustion Science, Vol. 66, pp.141-175 (2018).
2 WU, Q.X., PAN, Z.F. and AN, L., “Recent Advances in Alkali-doped Polybenzimidazole Membranes for Fuel Cell Applications”, Sustain. Energy Rev., Vol. 89, pp.168-183 (2018).
3 HUANG, B., PAN, Z.F., SU, X.Y. and AN, L., “Tin-based Materials as Versatile Anodes for Alkali (Earth)-ion Batteries”, Power Sources, Vol. 395, pp.41-59 (2018).
4 HUANG, B., PAN, Z.F., SU, X.Y. and AN, L., “Recycling of Lithium-ion Batteries: Recent Advances and Perspectives”, Power Sources, Vol. 399, pp.274-286 (2018).
5 YU, Y.G., YANG, X., ZHANG, X.B., ZHAO, Y.L., AN, L., HUANG, M.Y., CHEN, G. and ZHANG, R.Q., “Engineering the Band Gap States of the Rutile TiO2(110) Surface by Modulating the Active Heteroatom”, Chem. Int. Ed., Vol. 57, pp.8550-8554 (2018).
6 CHEN, R., XIA, M., ZHU, X., LIAO, Q., YE, D.D., AN, L., YU, Y., LONG, J. and ZHANG, W., “A Visible-light Responsive Micro Photocatalytic Fuel Cell with Laterally Arranged Electrodes”, Applied Thermal Engineering, Vol. 143, pp.193-199 (2018).
7 KHOR, A., LEUNG, P., SANZ, L., FLOX, C., XU, Q., AN, L., WILLS, R., MOHAMED, M.R., MORANTE, J. and SHAH, A., “Review of Zinc-based Hybrid Flow Batteries: From Fundamentals to Applications”, Materials Today Energy, Vol. 8, pp.80-108 (2018).
8 TAN, L., LI, X.H., WANG, Z.X., GUO, H.J., WANG, J.X. and AN, L., “PC/MWCNT Composite-coated Separator for Improving the Electrochemical Performances of Lithium Sulfur Battery”, ChemElectroChem, Vol. 5, pp.71-77 (2018).
9 WANG, Q., CHEN, F., LIU, Y., ZHANG, N., GEBREMARIAM, T., AN, L., WANG, J. and JOHNSTON, R., “AgSn Intermetallics as Highly Selective and Active Oxygen Reduction Electrocatalysts in Membraneless Alkaline Fuel Cells”, Power Sources, Vol. 404, pp.106-117 (2018).
10 CHAN, T.L., LIU, S.Y. and YUE, Y., “Nanoparticle Formation and Growth in Turbulent Flows Using the Bimodal TEMOM”, Powder Technology, Vol. 323, pp.507-517 (2018).
11 LIU, H.M. and CHAN, T.L., “Differentially Weighted Operator Splitting Monte Carlo Method for Simulating Complex Aerosol Dynamic Processes”, Particuology, Vol. 36, pp.114-126 (2018).
12 LIU, H.M. and CHAN, T.L., “Two-component Aerosol Dynamic Simulation Using Differentially Weighted Operator Splitting Monte Carlo Method”, Applied Mathematical Modelling, Vol. 62, pp.237-253 (2018).
13 XIA, Y., LIN, J.Z., KU, X.K. and CHAN, T.L., “Shear-induced Autorotation of Freely Rotatable Cylinder in a Channel Flow at Moderate Reynolds number”, Physics of Fluids, Vol.30, AN.: 043303, 18pp (2018).
14 TANG, X.P., ZOU, C.F., YAO, K., CHEN, G.H., LIU, B.Y., HE, Z.W. and GAO, F.R., “A Fast Estimation Algorithm for Lithium-ion Battery State of Health”, Journal of Power Sources, Vol. 396, pp.453-458 (2018).
15 WANG, W., HU, D.P., PAN, Y.Q., NIU, L.J. and CHEN, G.H., “Multiphase Transport Modeling for Freeze-drying of Aqueous Material Frozen with Prebuilt Porosity”, International Journal of Heat and Mass Transfer, Vol. 122, pp.1353-1365 (2018).
16 GAO, M., BAO, Y.B., QIAN, Y.X., DENG, Y.F., LI, Y.W. and CHEN, G.H., “Porous Anatase-TiO2(B) Dual-Phase Nanorods Prepared from in Situ Pyrolysis of a Single Molecule Precursor Offer High Performance Lithium-Ion Storage”, Inorganic Chemistry, Vol. 57, No. 19, pp.12245-12254 (2018).
17 DENG, Y.F., WANG, S.X., ZHOU, Y.B., QIAN, Y.X., QIN, X.S. and CHEN, G.H., “The Enhancement of Rate and Cycle Performance of LiMn2O4 at Elevated Temperatures by the Synergistic Roles of Porous Structure and Dual-cation Doping”, Journal of Applied Electrochemistry, 48, No. 10, pp.1083-1094 (2018).
18 LIU, Y.M., QIN, X.Y., ZHANG, S.Q., LIANG, G.M., KANG, F.Y., CHEN, G.H. and LI, B.H., “Fe3O4-Decorated Porous Graphene Interlayer for High-Performance Lithium-Sulfur Batteries”, ACS Applied Materials & Interfaces, Vol. 10, No. 31, pp.26264-26273 (2018).
19 WANG, W., YANG, J., HU, D.P., PAN, Y.Q., WANG, S.H. and CHEN, G.H., “Experimental and Numerical Investigations on Freeze-drying of Porous Media with Prebuilt Porosity”, Chemical Physics Letters, Vol. 700, pp.80-87 (2018).
20 YANG, Y.B., ZHANG, L.T., XU, H., QIN, X.S., DENG, Y.F. and CHEN, G.H., “Net-Structured Filter of Co(OH)2-Anchored Carbon Nanofibers with Ketjen Black for High Performance Li-S Batteries”, ACS SUSTAINABLE CHEMISTRY & ENGINEERING, Vol. 6, No.12, pp.17099-17107 (2018).
21 ZHUANG, H., XIE, Y., TAN, H.Q., DENG, Y.F., LI, Y.W. and CHEN, G.H., “CoFex-CoFe2O4/N-doped Carbon Nanocomposite Derived from in Situ Pyrolysis of a Single Source Precursor as a Superior Bifunctional Electrocatalyst for Water Splitting”, Electrochimica ACTA, Vol. 262, pp.18-26 (2018).
22 LEI, C.J., WANG, F.F., YANG, J., GAO, X.F., YU, X.Y., YANG, B., CHEN, G.H., YUAN, C., LEI, L.C. and HOU, Y., “Embedding Co2P Nanoparticles in N-Doped Carbon Nanotubes Grown on Porous Carbon Polyhedra for High-Performance Lithium-Ion Batteries”, Industrial & Engineering Chemistry Research, 57 No. 39, pp.13019-13025 (2018).
23 ZHANG, M.M., LI, X.Y., FAN, S.Y., ZENG, L.B., YIN, Z.F., LIAN, T.T. and CHEN, G.H., “Highly Oriented SnS2/RGO/Ag Heterostructures for Boosting Photoeletrochemical and Photocatalytic Performances via Schottky and RGO-n Dual-heterojunctions Interfacial Effects”, Applied Catalysis A-General, Vol. 563, 118-126 (2018).
24 ZOU, K.X., DENG, Y.F., CHEN, J.P., QIAN, Y.Q., YANG, Y.W., LI, Y.W. and CHEN, G.H., “Hierarchically Porous Nitrogen-doped Carbon Derived from the Activation of Agriculture Waste by Potassium Hydroxide and Urea for High-performance Supercapacitors”, Journal of Power Sources, Vol. 378, pp.579-588 (2018).
25 LIANG, G.M., QIN, X.Y., ZOU, J.S., LUO, L.Y., WANG, Y.Z., WU, M.Y., ZHU, H., CHEN, G.H., KANG, F.Y. and LI, B.H., “Electrosprayed Silicon-embedded Porous Carbon Microspheres as Lithium-ion Battery Anodes with Exceptional Rate Capacities”, Carbon, Vol. 127, pp.424-431 (2018).
26 LUO, L.Y., QIN, X.Y., WU, J.X., LIANG, G.M., LI, Q., LIU, M., KANG, F.Y., CHEN, G.H. and LI, B.H., “An Interwoven MoO3@CNT Scaffold Interlayer for High-performance Lithium-sulfur Batteries”, Journal of Materials Chemistry A, Vol. 6, pp.8612-8619 (2018).
27 ZHANG, L.T., DAMBOURNET, D., IADECOLA, A., BATUK, D., BORKIEWICZ, O.J., WIADEREK, K.M., SALAGER, E., SHAO, M.H., CHEN, G.H. and TARASCON, J.M., “Origin of the High Capacity Manganese-Based Oxyfluoride Electrodes for Rechargeable Batteries”, Chemistry of Materials, Vol. 30, No. 15, pp.5362-5372 (2018).
28 LI, P. and CHENG, L., “Shear Horizontal Wave Propagation in a Periodic Stubbed Plate and Its Application in Rainbow Trapping”, Ultrasonics, Vol. 84, pp.244-253 (2018).
29 SHAN, S.B., CHENG, L. and WEN, F.Z., “Characterization of the Second Harmonic Lamb Waves with a Refined Nonlinear Parameter”, ASME Transaction: Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems, Vol. 1, pp.011004-1 (2018).
30 SHAN, S.B., CHENG, L. and WEN, F.Z., “Design of Non-Linear-Lamb-Wave-Based Structural Health Monitoring Systems with Mitigated Adhesive Non-linearity”, Smart Materials and Structures, Vol. 27, Vol. 105006, 13pp (2018).
31 ZHANG, C., CHENG, L., QIU, J.H. and WANG, H.Y., “Damage Detection Based on Sparse Virtual Element Boundary Measurement Using Metal-core Piezoelectric Fiber”, Structural Health Monitoring: An International Journal, Vol. 17, No. 1, pp.15-23 (2018).
32 ZHOU, T. and CHENG, L., “A Resonant Beam Damper Tailored with Acoustic Black Hole Features for Broadband Vibration Reduction”, Journal of Sound and Vibration, Vol. 430, pp.174-184 (2018).
33 ZIAJA-SUJDAK, A., CHENG, L., RADECKI, R. and STASZEWSKI, W.J., “Near-field Wave Enhancement and ‘Quasi-surface’ Longitudinal Waves in a Segmented Thick-walled Hollow Cylindrical Waveguide”, Structural Health Monitoring: An International Journal, Vol. 17, No. 2, pp.346-362 (2018).
34 CAO, S.C., OUYANG, H.J. and CHENG, L., “Baseline-free Multi-damage Identification in Plate-like Structures by Using Multi-scale Approach and Low-rank Modelling”, Structural Control and Health Monitoring, Vol. e2923 (2018).
35 MA, L., ZHANG, S. and CHENG, L., “A 2D Daubechies Wavelet Model on the Vibration of Rectangular Plates Containing Strip Indentations with a Parabolic Thickness Profile”, Journal of Sound and Vibration, Vol. 429, pp.130-146 (2018).
36 FANG, H.B., YU, X. and CHENG, L., “Reconfigurable Origami Silencers for Tunable and Programmable Sound Attenuation”, Smart Materials and Structures, Vol. 27, No. 095007, 13pp (2018).
37 HU, Z.Y., MAXIT, L. and CHENG, L., “Piecewise Convergence Behavior of the Condensed Transfer Function Approach for Mid-to-high Frequency Modelling of a Panel-Cavity System”, Journal of Sound and Vibration, Vol. 435, pp.119-134 (2018).
38 LIU, Y., DU, J.T. and CHENG, L., “Analytical Coupled Vibro-acoustic Modeling of a Cavity-Backed Duct-membrane System with Uniform Mean Flow”, Acoust. Soc. Am., Vol. 144, No. 3, pp.1368-1380 (2018).
39 HUANG, W., JI, H.L., QIU, J.H. and CHENG, L., “Analysis of Ray Trajectories of Flexural Waves Propagating over Generalized Acoustic Black Hole Indentations”, Journal of Sound and Vibration, Vol. 417, pp.216-226 (2018).
40 JI, H.L., LUO, J., QIU, J.H. and CHENG, L., “Investigations on Flexural Wave Propagation and Attenuation in a Modified One-dimensional Acoustic Black Hole Using a Laser Excitation Technique”, Mechanical Systems and Signal Processing, Vol. 104, pp.19-35 (2018).
41 XIAO, Z.L., SHAN, S.B., WEN, F.Z. and CHENG, L., “Identification of Cascade Dynamic Nonlinear Systems: A Bargaining Game Theory Based Approach”, IEEE Transactions on Signal Processing, Vol. 66, No. 17, pp.4657-4669 (2018).
42 JI, H.L., CHEN, Z.N., QIU, J.H., WU, Y.P. and CHENG, L., “Super-harmonic Vibration and Its Reduction in SSD Control by Increase of Voltage Inversion Time”, Smart Materials and Structures, Vol. 27, No. 085007, 13pp (2018).
43 GHADIKOLAEI, M.A., CHEUNG, C.S. and YNG, K.F., “Study of Combustion, Performance and Emissions of a Diesel Engine Fuelled with Diesel/Biodiesel/Alcohol Blends having the Same Oxygen Concentration”, Energy, Vol. 157, pp.258-268 (2018).
44 WEI, L., CHEUNG, C.S. and NING, Z., “Effects of Biodiesel-ethanol and Biodiesel-butanol Blends on the Combustion, Performance and Emissions of a Diesel Engine”, Energy, Vol. 155, pp.957-970 (2018).
45 LI, X.L., ZHENG, Y., GUAN, C., CHEUNG, C.S. and HUANG, Z., “Effect of Biodiesel on PAH, OPAH, and NPAH Emissions from a Direct Injection Diesel Engine”, Environmental Science and Pollution Research, Vol. 25, pp.34131-34138 (2018).
46 CHEN, L. and CHOY, Y.S., “Fault Identification and Localization Based on De-dopplerization and Beamforming Kurtosis”, Noise and Vibration, Vol. S2, pp.666-668 (2018).
47 CHIANG, Y.K. and CHOY, Y.S., “Acoustic Behaviors of the Microperforated Panel Absorber Array in Nonlinear Regime under Moderate Acoustic Pressure Excitation”, Acoust. Soc. Am., Vol. 143, pp.538-549 (2018).
48 FEI, C.W., CHOY, Y.S., BAI, G.C. and TANG, W.Z., “Multi-feature Entropy Distance Approach with Vibration and Acoustic Emission Signals for Process Feature Recognition for Rolling Element Bearing Faults”, Structural health monitoring, Vol. 16, No. 3, pp.1-13 (2018).
49 LU, B., CHU, H.K., HUANG, K. and CHENG, L., “Vision-Based Surgical Suture Looping Through Trajectory Planning for Wound Suturing”, IEEE Transactions on Automation Science and Engineering, pp.1-15 (2018).
50 MENG, B., FU, M.W. and SHI, S.Q., “Deformation Characteristic and Geometrical Size Effect in Continuous Manufacturing of Cylindrical and Variable-thickness Flanged Microparts”, Mater. Process. Techno., Vol. 252, pp.546-558 (2018).
51 WANG, J.L., FU, M.W., SHI, S.Q. and KORSUNSKY, A.M., “Influence of Size Effect and Plastic Strain Gradient on the Springback Behaviour of Metallic Materials in Microbending Process”, J. Mech. Sci., Vol. 146, pp.105-115 (2018).
52 GUO, J., ZHAN, M., FU, M.W., GAO, P.F. and MA, F., “Extrapolation Based Constitutive Modeling of Flow Stress of Titanium Alloy Sheet under Hot-working Condition”, & Design, Vol. 154, pp.96-107 (2018).
53 SHANG, X., CUI, Z. and FU, M.W., “A Ductile Fracture Model Considering Stress State and Zener–Hollomon Parameter for Hot Deformation of Metallic Materials”, J. Mech. Sci., Vol. 144, pp.800-812 (2018).
54 MA, J., LI, H., WANG, D., FU, M.W. and TAO, Z.J., “Tribological Behaviors in Titanium Sheet and Tube Forming at Elevated Temperatures: Evaluation and Modeling”, Int J of Adv Manuf Tech, Vol. 79, pp.657-674 (2018).
55 MAO, M.Y., PENG, L.F., FU, M.W. and LAI, X.M., “Co-effect of Microstructure and Surface Constraints on Plastic Deformation in Micro-and Mesoscaled Forming Process”, Int J of Adv Manuf Tech, Vol. 98, No. 5-8, pp.1861-1886 (2018).
56 SHANG, X., CUI, Z. and FU, M.W., “A Ductile Fracture Model Considering Stress State and Zener–Hollomon Parameter for Hot Deformation of Metallic Materials”, J. Mech. Sci., Vol. 144, pp.800-812 (2018).
57 SUN, B., LIN, J. and FU, M.W., “Dependence of Processing Window and Microstructural Evolution on Initial Material State in Direct Electric Resistance Heat Treatment of NiTi Alloy”, & Design, Vol. 139, pp.549-564 (2018).
58 WANG, X.X., ZHAN, M., FU, M.W., GAO, P.F., GUO, J. and MA, F., “Microstructure Evolution of Ti-6Al-2Zr-1Mo-1V Alloy and Its Mechanism in Multi-pass Flow Forming”, Mater. Process. Techno., Vol. 261, pp.86-97 (2018).
59 XU, W.F., LUO, Y.X. and FU, M.W., “Microstructure Evolution in the Conventional Single Side and Bobbin Tool Friction Stir Welding of Thick Rolled 7085-T7452 Aluminum Alloy”, Materials Characterization, Vol. 138, pp.48-55 (2018).
60 ZHAN, M., GUO, J., FU, M.W., LI, R., GAO, P.F., LONG, H. and MA, F., “Formation Mechanism and Control of Flaring in forward Tube Spinning”, J. of Adv. Manuf. Tech., Vol. 94, No. 1-4, pp.59-72 (2018).
61 ZHAN, M., GUO, J., FU, M.W., GAO, P.F., LONG, H. and MA, F., “Formability Limits and Process Window Based on Fracture Analysis of 5A02-O Aluminium Alloy in Splitting Spinning”, Mater. Process. Techno., Vol. 257, pp.15-32 (2018).
62 ZHENG, J.Y., YANG, H.P., FU, M.W. and NG, C., “Study on Size Effect Affected Progressive Microforming of Conical Flanged Parts Directly Using Sheet Metals”, revised for publication in J. Mater. Process. Techno., Vol. 257, pp.15-32 (2018).
63 PENG, L., XU, Z., GAO, Z. and FU, M.W., “A Constitutive Model for Metal Plastic Deformation at Micro/Meso Scale with Consideration of Grain Orientation and Its Evolution”, J. Mech. Sci., Vol. 138, pp.74-85 (2018).
64 SUN, C.Y., CONG, Y.P., ZHANG, Q.D., FU, M.W. and LI, L., “Element Diffusion Model with Variable Coefficient in Bimetallic Bonding Process”, Mater. Process. Techno., Vol. 253, pp.99-108 (2018).
65 XU, W., LUO, Y., ZHANG, W. and FU, M.W., “Comparative Study on Local and Global Mechanical Properties of Bobbin Tool and Conventional Friction Stir Welded 7085-T7452 Aluminum Thick Plate”, of Mater. Sci. & Tech., Vol. 34, No. 1, pp.173-184 (2018).
66 XU, W.F., WANG, H., LUO, Y.X., LI, W.J. and FU, M.W., “Mechanical Behavior of 7085-T7452 Aluminum Alloy Thick Plate Joint Produced by Double-sided Friction Stir Welding: Effect of Welding Parameters and Strain Rates”, J of Manufacturing Processes, Vol. 35, pp.261-270 (2018).
67 ZHANG, H., LIU, J., SUI, D., CUI, Z. and FU, M.W., “Study of Microstructural Grain and Geometric Size Effects on Plastic Heterogeneities at Grain-level by Using Crystal Plasticity Modeling with High-fidelity Representative Microstructures”, J. of Plasticity, Vol. 100, pp.69-89 (2018).
68 SHEN, J.Y., ZHAO, Z.L., YAO, Z.K., NING, Y.Q., XIONG, Y.H. and FU, M.W., “A Two-Stage Physical-Based Model for Predicting Flow Stress of As-cast TiAl Alloy Under Hot Deformation Conditions”, J of Materials Engineering and Performance, Vol. 27, No. 10, pp.5384-5394 (2018).
69 JIAO, Z.B. and SCHUH, C.A., “Nanocrystalline Ag-W Alloys Lose Stability upon Solute Desegregation from Grain Boundaries”, Acta Materialia, Vol. 161, No. 194 (2018).
70 GAO, L, SONG, J., JIAO, Z.B., LIAO, W., LUAN, J., SURJADI, J.U., LI, J., ZHANG, H., SUN, D., LIU, C.T. and LU, Y., “High‐Entropy Alloy (HEA)‐Coated Nanolattice Structures and Their Mechanical Properties”, Advanced Engineering Materials, Vol. 20, pp.1700625 (2018).
71 YANG, T., ZHAO, Y.L., TONG, Y., JIAO, Z.B., WEI, J., CAI, J.X., HAN, X.D., CHEN, D., HU, A., KAI, J.J., LU, K., LIU, Y. and LIU, C.T., “Multicomponent Intermetallic Nanoparticles and Superb Mechanical Behaviors of Complex Alloys”, Science, Vol. 362, pp.933-937 (2018).
72 DAI, H.H., JING, X.J., SUN, C., WANG, Y. and YUE, X.K., “Accurate Modeling and Analysis of a Bio-inspired Isolation System: With Application to On-orbit Capture”, Mechanical Systems and Signal Processing, Vol. 109, pp.111-133 (2018).
73 DAI, H.H., JING, X.J., WANG, Y., YUE, X.K. and YUAN, J.P., “Post-capture Vibration Suppression of Spacecraft via a Bio-inspired Isolation System”, Mechanical Systems and Signal Processing, Vol. 105, pp.214-240 (2018).
74 HU, F.Z. and JING, X.J., “A 6-DoF Passive Vibration Isolator Based on Stewart Structure with X-shaped Legs”, Nonlinear Dynamics, Vol. 91, No. 1, pp.157-185 (2018).
75 PAN, H.H., JING, X.J. and SUN, W., “Analysis and Design of a Bio-inspired Vibration Sensor System in Noisy Environment”, IEEE/ASME Trans Mechanics, Vol. 23, No. 2, pp.845-855 (2018).
76 PAN, H.H., JING, X.J., SUN, W.C. and GAO, H.J., “A Bio-inspired Dynamics-Based Adaptive Tracking Control for Nonlinear Suspension Systems”, IEEE Transactions on Control Systems Technology, Vol. 26, No. 3, pp.903-914 (2018).
77 QIAN, J.G. and JING, X.J., “Wind-driven Hybridized Triboelectric-Electromagnetic Nanogenerator and Solar Cell as a Sustainable Power Unit for Self-powered Natural Disaster Monitoring Sensor Networks”, Nano Energy, Vol. 52, pp.78-87 (2018).
78 WANG, H. and JING, X.J., “An Optimized Virtual Beam based Event-Oriented Algorithm for Multiple Fault Localization in Vibrating Structures”, Nonlinear Dynamics, Vol. 91, Issue 4, pp.2293-2318 (2018).
79 WANG, H. and JING, X.J., “Vibrationsignal Based Fault Diagnosis in Complex Structures: A Beam-like-structure Approach”, Structure Health Monitoring, Vol. 17, No. 3, pp.472-493 (2018).
80 LI, M., ZHOU, J.J. and JING, X.J., “Improving Low-Frequency Piezoelectric Energy Harvesting Performance with Novel X-structured Harvesters”, Nonlinear Dynamics, Vol. 94, No. 2, pp.1409-1428 (2018).
81 LIU, Y.W., CHEN, J.B., LIU, J.G. and JING, X.J., “Nonlinear Mechanics of Flexible Cables in Space Robotic Arms Subject to Complex Physical Environment”, Nonlinear dynamics, Vol. 94, No. 1, pp.649-667 (2018).
82 GUO, Y.Q., SUN, C.L., XU, Z.D. and JING, X.J., “Preparation and Tests of MR Fluids with CI Particles Coated With MWNTs”, Mater., Vol.5, Article No. 50, 8pp (2018).
83 LI, L., LU, Z., LIU, X.L., SUN, T., JING, X. and SHANGGUAN, W.B., “Modeling and Analysis of Friction Clutch at a Driveline for Suppressing Car Starting Judder”, Journal of Sound and Vibration, Vol. 424, pp.335-351 (2018).
84 FAN, H.K.H., LEUNG, R.C.K., LAM, G.C.Y., Aurégan, Y. and DAI, X., “Coupling Strategy for Resolving In-duct Elastic Panel Aeroacoustic-Structural Interaction with CE/SE Metho”, AIAA Journal, Vol. 56, No. 12, pp.5033-5040 (2018).
85 LAM, G.C.Y. and LEUNG, R.C.K., “Aeroacoustics of NACA 0018 Airfoil with aCavity”, AIAA Journal, Vol. 56, No. 12, pp.4775-4786 (2018).
86 LEUNG, W.W.F., HAU, W.Y. and CHOY, H.F., “Microfiber-nanofiber Composite Filter for High-efficiency and Low Pressure Drop under Nano-aerosol Loading”, & Purif. Tech. J, Vol. 206, pp.26-38 (2018).
87 LEUNG, W.W.F. and CHOY, H.F., “Transition from Depth to Surface Filtration for a Low-skin Effect Filter Subject to Continuous Loading of Nano-aerosols”, Sep & Puri Tech, Vol. 190, pp.202-210 (2018).
88 LEUNG, W.W.F. and CHOY, H.F., “Transition from Depth to Surface Filtration for a High-efficiency, High-skin Effect, Nanofiber Filter under Continuous Nano-aerosol Loading”, Eng. Sci., Vol. 182, pp.67-76 (2018).
89 KANJWAL, M., LEUNG, W.W.F. and CHRONAKIS, I., “Composite Nanofibers and Photocatalytic Degradation of Dairy Effluent”, & Purif. Tech. J, Vol. 192, pp.160-165 (2018).
90 KANJWAL, M., LEUNG, W.W.F. and CHRONAKIS, I., “Composite Nanofibers and Photocatalytic Degradation of Dairy Effluent”, & Purif. Tech. J, Vol. 192, pp.160-165 (2018).
91 LI, Y. and LEUNG, W.W.F., “Introduction of Graphene Nanofibers into the Perovskite Layer of Perovskite Solar Cells”, Chemsuschem, Vol. 11, pp.2921-2929 (2018).
92 SUN, Q.Q. and LEUNG, W.W.F., “Charged PVDF Multi-layer Filters with Enhanced Filtration Performance for Filtering Nano-aerosols”, and Purif. Tech. J., Vol. 212, pp.854-876 (2018).
93 LIU, Y., “The Consistence between Signalling Molecular Pathways and Traditional Chinese Medicine Therapeutic Strategies”, In BASIC & CLINICAL PHARMACOLOGY & TOXICOLOGY, Vol. 123, pp.17-17 (2018).
94 YANG, X.L. and LIU, Y., “An Improved k–ω–φ–α Turbulence Model Applied to Near-all, Separated and Impinging Jet Flows and Heat Transfer”, Computers and Mathematics with Applications, Vol. 76, Issue 2, pp.315-339 (2018).
95 LIN, C., CHEN, S., XIAO, L. and LIU, Y., “Tuning Drop Motion by Chemical Chessboard-patterned Surfaces: A Many-body Dissipative Particle Dynamics Study”, Langmuir, Vol. 34, No. 8, pp.2708-2715 (2018).
96 NAVARRO-ALARCON, D., ZAHRA, O., TREJO, C., OLGUIN-DIAZ, E. and PARRA-VEGA, V., “Computing Pressure-Deformation Maps for Braided Continuum Robots”, Frontiers in Robotics and AI, pp.1-8 (2018).
97 NAVARRO-ALARCON, D. and LIU, Y.H., “Fourier-Based Shape Servoing: A New Feedback Method to Actively Deform Soft Objects into Desired 2-D Image Contours”, IEEE Transactions on Robotics (T-RO), Vol. 34, No. 1, pp.272-279 (2018).
98 YIP, H.M., WANG, Z., NAVARRO-ALARCON, D., LI, P., CHEUNG, T.H., GREIFFENHAGEN, C. and LIU, Y.H., “A Collaborative Robotic Uterine Positioning System for Laparoscopic Hysterectomy: Design, Modeling and Experiments”, International Journal of Medical Robotics and Computer Assisted Surgery, pp.1-37 (2018).
99 WAN, J.B., RUAN, H.H., WANG, X. and WAN, J.Q., “Investigating Relaxation of Glassy Materials Based on Natural Vibration of Beam: A Comparative Study of Borosilicate and Chalcogenide Glasses”, Journal of Non-Crystalline Solids, Vol. 500, pp.181-190 (2018).
100 WAN, J.Q., RUAN, H.H., WANG, J.B. and SHI, S.Q., “The Kinetic Diagram of Sigma Phase and Its Precipitation Hardening Effect on 15Cr-2Ni Duplex Stainless Steel”, Materials Science and Engineering: A, Vol. 711, pp.571-578 (2018).
101 LIN, C., WAN, J.Q. and RUAN, H.H., “Phase Field Modeling of Widmanstätten Ferrite Formation in Steel”, Journal of Alloys and Compounds, Vol. 769, pp.620-630 (2018).
102 WAN, J.Q., LOU, Y. and RUAN, H.H., “The Partition Coefficient of Alloying Elements and Its Influence on the Pitting Corrosion Resistance of 15Cr-2Ni Duplex Stainless Steel”, Corrosion Science, Vol. 139, pp.13-20 (2018).
103 YANG, S., GAO, Z., RUAN, H.H., GAO, C., WANG, X., SUN, X. and WEN, X., “Non-Contact and Real-Time Measurement of Kolsky Bar with Temporal Speckle Interferometry”, Applied Sciences-Basel, Vol. 8, pp.808 (2018).
104 YANG, X.S., ZHAI, H.R., RUAN, H.H., SHI, S.Q. and ZHANG, T.Y., “Multi-temperature Indentation Creep Tests on Nanotwinned Copper”, International Journal of Plasticity, Vol. 104, pp.68-79 (2018).
105 ZHOU, T.F., ZHOU, Q., XIE, J.Q., LIU, X.H., WANG, X.B. and RUAN, H.H., “Elastic-viscoplasticity Modeling of the Thermo-mechanical Behavior of Chalcogenide Glass for Aspheric Lens Molding”, International Journal of Applied Glass Science, Vol. 9, pp.252-262 (2018).
106 CUI,, SHI, S.Q., WEI, G.S. and DU, X.Z., “Shear Deformation-induced Anisotropic Thermal Conductivity of Graphene”, Phys. Chem. Chem. Phys., Vol. 20, pp.951-957 (2018).
107 CUI, L., SHI, S.Q., LI, Z., WEI, G.S. and DU, X.Z., “Manipulating Thermal Conductance of Supported Graphene via Surface Hydroxylation of Substrates”, The Journal of Physical Chemistry C, Vol. 122, pp.27689-27695 (2018).
108 CUI, L., SHI, S.Q., LI, Z., WEI, G.S. and DU, X.Z., “Reduction of Thermal Conductivity in Silicene Nanomesh: Insights from Coherent and Incoherent Phonon Transport”, Chem. Chem. Phys., Vol. 20, pp.27169 (2018).
109 MA, H.L., ZHANG, X.Q., LAU, K.T. and SHI, S.Q., “Effect of Nanoclay Concentration on Lap Joint Shear Performance of Nanoclay/Epoxy Adhesive at Cryogenic Condition”, Journal of Composite Materials, Vol. 52, No. 18, pp.2477-2482 (2018).
110 XIAO, Z.H., HU, S.Y., LUO, J.L., SHI, S.Q., HENAGER, C.H. and Jr., “A Quantitative Phase-field Model for Crevice Corrosion”, Computational Materials Science, Vol. 149, pp.37-48 (2018).
111 LIU, W.B., CHENG, P., YAN, J.Z., LI, N., SHI, S.Q. and ZHANG, S.C., “Temperature-induced Surface Reconstruction and Interface Structure Evolution on Ligament of Nanoporous Copper”, Scientific Reports, Vol. 8, Art No. 447 (2018).
112 ANSARI, T.Q., XIAO, Z.H., HU, S.Y., LI, Y.L., LUO, J.L. and SHI, S.Q., “Phase-field Model of Pitting Corrosion Kinetics in Metallic Materials”, npj Computational Materials, Vol. 4, No. 38 (2018).
113 DONG, X., LIU, W.B., CHEN, X., YAN, J.Z., LI, N., SHI, S.Q., ZHANG, S.C. and YANG, X.S., “Novel Three Dimensional Hierarchical Porous Sn-Ni Alloys as Anode for Lithium Ion Batteries with Long Cycle Life by Pulse Electrodeposition”, Chemical Engineering Journal, Vol. 350, pp.791-798 (2018).
114 LI, D., LIU, W.B., LI, N., ZHONG, Z.Y., YAN, J.Z. and SHI, S.Q., “An Available Technology for Preparation of New Cast MnCuNiFeZnAl Alloy with Superior Damping Capacity and High Service Temperature”, Journal of Visualized Experiments, Vol. 139, pp.e57180 (2018).
115 YE,F., ZHANG, Y.H., HE, Q.F., ZHUANG, Y., WANG, S., SHI, S.Q., HU, A., FAN, J. and YANG, Y., “Atomic-scale Distorted Lattice in Chemically Disordered Equimolar Complex Alloys”, Acta Materialia, Vol. 150, pp.182-194 (2018).
116 RADECKI, R., SU, Z., CHENG, L., PACKO, P. and STASZEWSKI, W.J., “Modelling Nonlinearity of Guided Ultrasonic Waves in Fatigued Materials Using a Nonlinear Local Interaction Simulation Approach and a Spring Model”, Ultrasonics, Vol. 84, pp.272-289 (2018).
117 LI, Y., LIAO, Y. and SU, Z., “Graphene-functionalized Polymer Composites for Self-sensing of Ultrasonic Waves: An Initiative towards “Sensor-free” Structural Health Monitoring”, Composites Science and Technology, Vol. 168, pp.203-213 (2018).
118 LI, Y., WANG, K. and SU, Z., “Dispersed Sensing Networks in Nano-engineered Polymer Composites: From Static Strain Measurement to Ultrasonic Wave Acquisition”, Sensors, Vol. 18, No. 5, pp.1398 (15pp) (2018).
119 LIU, M., SCHMICKER, D., SU, Z. and CUI, F., “A Benchmark Study of Modeling Lamb Wave Scattering by a through Hole Using a Time-domain Spectral Element Method”, ASME Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems, Vol. 1, No. 021006, 8pp (2018).
120 WANG, K., FAN, Z. and SU, Z., “Orienting Fatigue Cracks Using Contact Acoustic Nonlinearity in Scattered Plate Waves”, Smart Materials and Structures, Vol. 27, No. 09LT01, 6pp (2018).
121 WANG, K., LIU, M., SU, Z., YUAN, S. and FAN, Z., “Analytical Insight into “Breathing” Crack-induced Acoustic Nonlinearity with an Application to Quantitative Evaluation of Contact Cracks”, Ultrasonics, Vol. 88, pp.157-167 (2018).
122 XU, H., ZHOU, Q., CAO, M., SU, Z. and WU, Z., “A Dynamic Equilibrium-based Damage Identification Method Free of Structural Baseline Parameters: Experimental Validation in a Two-dimensional Plane Structure”, Journal of Aerospace Engineering, Vol. 31, No. 6, pp04018081 (8pp) (2018).
123 ZHANG, Z., LIU, M., LIAO, Y., SU, Z. and XIAO, Y., “Contact Acoustic Nonlinearity (CAN)-based Continuous Monitoring of Bolt Loosening: Hybrid Use of High-order Harmonics and Spectral Sidebands”, Mechanical Systems and Signal Processing, Vol. 103, pp.280-294 (2018).
124 ALKAYEM, N.F., CAO, M., ZHANG, Y., BAYAT, M. and SU, Z., “Structural Damage Detection Using Finite Element Model Updating with Evolutionary Algorithms: A Survey”, Neural Computing and Applications, Vol. 30, pp.389-411 (2018).
125 LIU, M., WANG, Q., ZHANG, Q., LONG, R. and SU, Z., “Characterizing Hypervelocity (> 2.5 km/s)-impact-engendered Damage in Shielding Structures Using In-situ Acoustic Emission: Simulation and Experiment”, International Journal of Impact Engineering, Vol. 111, pp.273-284 (2018).
126 SUN, X., DING, X., LI, F., ZHOU, S., LIU, Y., HU, N., SU, Z., ZHAO, Y., ZHANG, J. and DENG, M., “Interaction of Lamb Wave Modes with Weak Material Nonlinearity: Generation of Symmetric Zero-frequency Mode”, Sensors, Vol. 18, No. 2451, 20pp (2018).
127 AHMAD, S., TANG, H. and YAO, H.M., “Oblique Impact of Two Successive Droplets on a Flat Surface”, International Journal of Heat and Mass Transfer, Vol. 119, pp.433-445 (2018).
128 KEFAYATI, G.H.R., TANG, H., CHAN, A. and WANG, X., “A Lattice Boltzmann Model for Thermal Non-Newtonian Fluid Flows through Porous Media”, Computers & Fluids, Vol. 176, pp.226-244 (2018).
129 KEFAYATI, G.H.R. and TANG, H., “MHD Mixed Convection of Viscoplastic Fluids in Different Aspect Ratios of a Lid-driven Cavity Using LBM”, International Journal of Heat and Mass Transfer, Vol. 124, pp.344-367 (2018).
130 KEFAYATI, G.H.R. and TANG, H., “Lattice Boltzmann Simulation of Viscoplastic Fluids on Natural Convection in an Inclined Enclosure with Inner Cold Circular/Elliptical Cylinders (Part III: Four Cylinders)”, International Journal of Heat and Mass Transfer, Vol. 123, pp.1182-1203 (2018).
131 KEFAYATI, G.H.R. and TANG, H., “Lattice Boltzmann Simulation of Viscoplastic Fluids on Natural Convection in an Inclined Enclosure with Inner Cold Circular/Elliptical Cylinders (Part II: Two Cylinders)”, International Journal of Heat and Mass Transfer, Vol. 123, pp.1163-1181 (2018).
132 KEFAYATI, G.H.R. and TANG, H., “Lattice Boltzmann Simulation of Viscoplastic Fluids on Natural Convection in an Inclined Enclosure with Inner Cold Circular/Elliptical Cylinders (Part I: One Cylinder)”, International Journal of Heat and Mass Transfer, Vol. 123, pp.1138-1162 (2018).
133 KEFAYATI, G.H.R. and TANG, H., “Mesoscopic Simulation of Double-diffusive Natural Convection and Entropy Generation of Bingham Fluid in an Open Cavity”, European Journal of Mechanics-B/Fluids, Vol. 69, pp.1-45 (2018).
134 KEFAYATI, G.H.R. and TANG, H., “Double-diffusive Natural Convection and Entropy Generation of Carreau Fluid in a Heated Enclosure with an Inner Circular Cold Cylinder (Part II: Entropy Generation)”, International Journal of Heat and Mass Transfer, Vol. 120, pp.683-713 (2018).
135 KEFAYATI, G.H.R. and TANG, H., “Double-diffusive Natural Convection and Entropy Generation of Carreau Fluid in a Heated Enclosure with an Inner Circular Cold Cylinder (Part I: Heat and Mass Transfer)”, International Journal of Heat and Mass Transfer, Vol. 120, pp.731-750 (2018).
136 KEFAYATI, G.H.R. and TANG, H., “MHD Thermosolutal Natural Convection and Entropy Generation of Carreau Fluid in a Heated Enclosure with Two Inner Circular Cold Cylinders, Using LBM”, International Journal of Heat and Mass Transfer, Vol. 126, pp.508-530 (2018).
137 KEFAYATI, G.H.R., TANG, H. and CHAN, A., “Immersed Boundary-finite Difference Lattice Boltzmann Model through Fluid-structure Interaction for Viscoplastic Fluids”, Journal of Fluids and Structures, Vol. 83, pp.238-258 (2018).
138 LI, L., TANG, H., WANG, J.Z., LIN, J. and YAO, H.M., “Rolling Adhesion of Cell in Shear Flow: A Theoretical Model”, Journal of the Mechanics and Physics of Solids, Vol. 119, pp.369-381 (2018).
139 WANG, C. and TANG, H., “Enhancement of Aerodynamic Performance of a Heaving Airfoil Using Synthetic-jet Based Active Flow Control”, Bioinspiration & Biomimetics, Vol. 13, pp.046005 (2018).
140 WANG, L., TANG, H. and WU, Y., “On a Submerged Wave Energy Converter with Snap-through Power Take-off”, Applied Ocean Research, Vol. 80, pp.24-36 (2018).
141 WEN, X., TANG, H. and LIU, Y., “Interaction of Twin Synthetic Jets in Attached and Separated Boundary Layers: Effects of Yaw Angle and Phase Difference”, Journal of Visualization, Vol. 21, pp.949-963 (2018).
142 WEN, X., LIU, Y. and TANG, H., “Unsteady Behavior of a Sweeping Impinging Jet: Time-resolved Particle Image Velocimetry Measurements”, Experimental Thermal and Fluid Science, Vol. 96, pp.111-127 (2018).
143 VYAS, A., “A Policy Review of Internationalization of Higher Education in Hong Kong: Motivation, Advancement and Development”, Journal of Asian Public Policy Iss. 1, Vol. 11, pp.46-66 (2018).
144 VYAS, A., LEUNG, C.W. and WONG, W.O., “Development Student Driven Learning: Impact on Knowledge and Attitude”, International Journal of Learning and Teaching, Vol. 4 No. 4 (2018).
145 VYAS, A., ZHOU, Z.F. and SHEN, Y.G., “Effect of Aluminum Contents on Sputter Deposited CrAlN Thin Films”, Materials Science and Engineering (IOP Series), Vol. 307, No. 012079 (2018).
146 WEN, C.Y., SALDÍVAR MASSIMI, H. and SHEN, H., “Extension of CE/SE Method to Non-equilibrium Dissociating Flows”, Journal of Computational Physics, Vol. 356, pp.240-260 (2018).
147 HAO, J.A. and WEN, C.Y., “Numerical Investigation of Oxygen Thermochemical Nonequilibrium on High-Enthalpy Double-Cone Flows”, International Journal of Heat and Mass Transfer, Vol. 127, Part B, pp.892-902 (2018).
148 HAO, J.A. and WEN, C.Y., “Effects of Vibrational Nonequilibrium on Hypersonic Shock Wave/Laminar-Boundary-Layer Interactions”, International Communications in Heat and Mass Transfer, Vol. 97, pp.136-142 (2018).
149 SHEN, L. and WEN, C.Y., “Oscillations of Leading-Edge Vortex Breakdown Locations over a Delta Wing”, AIAA Journal, Vol. 56, No. 6, pp.2113-2118 (2018).
150 SHEN, H. and WEN, C.Y., “Theoretical Investigation of Shock Stand-off Distance for Non-equilibrium Flows over Spheres”, Chinese Journal of Aeronautics, Vol. 31, No. 5, pp.990-996 (2018).
151 ZHAO, R., WEN, C.Y., TIAN, X.D, LONG, T.H. and YUAN, W., “Numerical Simulation of Local Wall Heating and Cooling Effect on the Stability of a Hypersonic Boundary Layer”, International Journal of Heat and Mass Transfer, Vol. 121, pp.986-998 (2018).
152 GUAN, B., LIU, Y., WEN, C.Y. and SHEN, H., “Numerical Study on Liquid Droplet Internal Flow under Shock Impact”, AIAA Journal, Vol. 56, No. 9, pp.3382-3387 (2018).
153 GUAN, B., LEONG, K.P. and WEN, C.Y., “Detonation-Driven Fuel-Injection System for Supersonic Combustion Testing Facilities”, AIAA Journal, Vol. 56, No. 8, pp.3353-3357 (2018).
154 LI, H.H., KAO, C.Y. and WEN, C.Y., “Labyrinthine and Secondary Wave Instabilities of a Miscible Magnetic Fluid Drop in a Hele-Shaw Cell”, Journal of Fluid Mechanics, Vol. 836, pp.374-396 (2018).
155 SHEN, L., CHEN, Z.N. and WEN, C.Y., “Experimental Investigation of the Flow Structure over a Delta Wing via Flow Visualization Methods”, Vis. Exp., Vol. 134, pp.e57244 (2018).
156 SUN, J.X., LI, B.Y., WEN, C.Y. and CHEN, C.K., “Design and Implementation of a Real-Time Hardware-in-the-Loop Testing Platform for a Dual-Rotor Tail-Sitter Unmanned Aerial Vehicle”, Mechatronics, Vol. 56, pp.1-15 (2018).
157 UY, C.K., SHI, L.S. and WEN, C.Y., “Chemical Reaction Mechanism Related Vibrational Nonequilibrium Effect on the Zel’dovich-von Neumann-Döring (ZND) Detonation Model”, Combustion and Flame, Vol. 196, pp.174-181 (2018).
158 ZHAO, R., LIU, T., WEN, C.Y., ZHU, J. and CHENG, L., “Theoretical Modeling and Optimization of Porous Coating for Hypersonic-laminar-flow Control”, AIAA Journal, Vol. 56, No. 8, pp.2942-2946 (2018).
159 LI, B.Y., ZHOU, Y.F., SUN, J.X., WEN, C.Y. and CHEN, C.K., “Development of Model Predictive Controller for a Tail-sitter VTOL UAV in Hover Flight”, Sensors, Vol. 18, pp.2859 (2018).
160 ZHANG, Y.N., TENG, H.H., NG, H.D. and WEN, C.Y., “On the Transition between Different Initiation Structures of Wedge-induced Oblique Detonations”, AIAA Journal, Vol. 56, No. 10, pp.4016-4023 (2018).
161 XUE, X.P., NISHIYAMA, Y., NAKAMURA, Y., MORI K., WANG, Y.P. and WEN, C.Y., “High-Speed Unsteady Flows Past Two-Body Configurations”, Chinese Journal of Aeronautics, Vol. 31, No. 1, pp.54-64 (2018).
162 LUO, X.S., ZHANG, F., DING, J.C., SI, T., YANG, J.M., ZHAI, Z.G. and WEN, C.Y., “Long-term Effect of Rayleigh-Taylor Stabilization on Converging Richtmyer- Meshkov Instability”, Journal of Fluid Mechanics, Vol. 849, pp.231-244 (2018).
163 WONG, W.O., FAN, R. and CHENG, F., “Design Optimization of a Viscoelastic Dynamic Vibration Absorber Using a Modified Fixed-points Theory”, Journal of the Acoustical Society of America, Vol. 143, pp.1064-1075 (2018).
164 HUA, Y.Y., WONG, W.O. and CHENG, L., “Optimal Design of a Beam-based Dynamic Vibration Absorber Using Fixed-points Theory”, Journal of Sound and Vibration, Vol. 421, pp.111-131 (2018).
165 AHMAD, S., TANG, H. and YAO, H., “Oblique Impact of Two Successive Droplets on a Flat Surface”, J. Heat and Mass Transfer, Vol. 119, pp.433-445 (2018).
166 WEI, A., LIU, Q., YAO, H. and LI, Y., “Principles and Mechanisms of Strain-dependent Thermal Conductivity of Polycrystalline Graphene with Varying Grain Size and Surface Hydrogenation”, Journal of Physical Chemistry C, Vol. 122, pp.19869-19879 (2018).
167 LI, Y., WEI, A., YE, H. and YAO, H., “Mechanical and Thermal Properties of Grain Boundary in Planar Heterostructure of Graphene and Hexagonal Boron Nitride”, Nanoscale, Vol. 10, pp.3497-3508 (2018).
168 YIN, Q., GUO, Z., LI, Y. and YAO, H., “Computational Study on the Effects of Mechanical Constraint on the Performance of Si Nanosheets as Anode Material for Lithium-ion Batteries”, Journal of Physical Chemistry C, Vol. 122, No. 28, pp.16374-16379 (2018).
169 LI, L., TANG, H., WANG, J., LIN, J. and YAO, H., “Rolling Adhesion of Cell in Shear Flow: A Theoretical Model”, Mech. Phys. Solids, Vol. 119, pp.369-381 (2018).
170 FU, J., ZHANG, H., GUO, Z., FENG, D.Q., THIYAGARAJAN, V. and YAO, H., “Combat Biofouling with Microscopic Ridge-like Surface Morphology: A Bioinspired Study”, Roy. Soc. Interface, Vol. 15, pp.20170823 (2018).
171 YANG, J., WANG, Y., LI, Y., GAO, H., CHAI, Y. and YAO, H., “Edge Orientations of Mechanically Exfoliated Anisotropic Two-dimensional Materials”, Mech. Phys. Solids, Vol. 112, pp.157-168 (2018).
172 MENG, Y., GUO, Z., FITZER, S.C., UPADHYAY, A., CHAN, V.B.S., LI, C., CUSACK, M., YAO, H., YEUNG, K.W.K. and THIYAGARAJAN, V., “Ocean Acidification Reduces Mechanical Properties of the Portuguese Oyster Shell with Impaired Microstructure: A Hierarchical Analysis”, Biogeosciences, Vol. 15, pp.6833–6846 (2018).
173 LI, Y., ZHANG, P. and KANG, N., “Linear Faraday Instability on a Viscous Droplet Immersed in another Inviscid Fluid”, Physical of Fluids, Vol. 30, pp.102104 (2018).
174 SUN, K., ZHANG, P., CHE, Z. and WANG, T., “Marangoni-flow-induced Partial Coalescence of a Droplet on a Liquid/Air Interface”, Physical Review Fluids, Vol. 3, pp.023602 (2018).
175 SUN, K., ZHANG, P., JIA, M. and WANG, T., “Collision-induced jet-like Mixing for Droplets of Unequal-sizes”, International Journal of Heat and Mass Transfer, Vol. 120, pp.218-227 (2018).
176 XIA, X. and ZHANG, P., “A Vortex-dynamical Scaling Theory for Flickering Buoyant Diffusion Flames”, Journal of Fluid Mechanics, Vol. 855, pp.1156-1169 (2018).
177 YU, and ZHANG, P., “Circulation-controlled Firewhirl with Differential Diffusion”, Combustion and Flame, Vol. 189, pp.288–299 (2018).
178 ZHANG, Z., ZHANG, P. and ZHAO, Z., “Cross-Impingement and Combustion of Sprays in High-Pressure Chamber and Opposed-piston Compression Ignition Engine”, Applied Thermal Engineering, Vol. 144, pp.137-146 (2018).
179 ZHANG, Z. and ZHANG, P., “Modelling Kinetic Energy Dissipation of Bouncing Droplets for Lagrangian Simulation of Impinging Sprays under High Ambient Pressures”, Spray and Atomization, Vol. 28, No. 8, pp.637-694 (2018).
180 ZHANG, D., HE, C., ZHANG, P. and TANG, C., “Mass Interminglement and Hypergolic Ignition of TMEDA and WFNA Droplets by Off-center Collision”, Combustion and Flame, Vol. 197, pp.276-289 (2018).
181 ZHU, X., XIA, X. and ZHANG, P., “Near-field Flow Stability of Buoyant Methane/Air Inverse Diffusion Flames”, Combustion and Flame, Vol. 191, pp.66-75 (2018).
182 MENG, Q., ZHAO, X., ZHANG, L., ZHANG, P. and SHENG, L., “A Theoretical Kinetics Study on Low-temperature Reactions of Methyl Acetate Radicals with Molecular Oxygen”, Combustion and Flame, Vol. 196, pp.66-75 (2018).
183 ZHANG, L., MENG, Q., CHI, Y. and ZHANG, P., “Toward High-Level Theoretical Studies of Large Biodiesel Molecules: An ONIOM [QCISD(T)/CBS:DFT] Study of the Reactions between Unsaturated Methyl Esters (CnH2n−1COOCH3) and Hydrogen Radical”, Journal of Physical Chemistry A, Vol. 122, pp.4882-4893 (2018).
184 YUE, L.Y., JIA, Y., XU, X., ZHANG, X. and ZHANG, P., “Effects of Cowl Shock on the Self-starting Characteristics of Hypersonic Inlets”, Aerospace Science and Technology, Vol. 74, pp.72-80 (2018).
185 YIN, H.B., ZHENG, G.P., WANG, Y.X. and YAO, B.J., “New Monolayer Ternary In-Containing Sesquichalcogenides BiInSe3, SbInSe3, BiInTe3, and SbInTe3 with High Stability and Extraordinary Piezoelectric Properties”, Physical Chemistry Chemical Physics, Vol. 20, pp.19177-87 (2018).
186 SU, X.L., CHEN, J.R., ZHENG, G.P., YANG, J.H., GUAN, X.X., LIU, P. and ZHENG, X.C., “Porous Activated Carbon Tubes Derived from Loofah Sponge Biomass for Supercapacitor Applications”, Applied Surface Science, Vol. 436, pp.327-336 (2018).
187 SU, X.L., FU, L., CHENG, M.Y., ZHENG, G.P., ZHENG, X.C. and YANG, J.H., “High-performance Supercapacitors Based on Porous Activated Carbons from Cattail Wool”, Materials Science, Vol. 53, pp.9191 (2018).
188 ZHANG, J.J., FANG, S.S., MEI, J.Y., ZHENG, G.P., ZHENG, X.C. and HUAN, X.X., “High-efficiency Removal of Rhodamine B Dye in Water Using g-C3N4 and TiO2 co-hybridized 3D Graphene Aerogel Composites”, Separation and Purification Technology, Vol. 194, pp.96-103 (2018).
189 CHENG, J.Y., LIANG, J., DONG, L.B., CHAI, J.X., ULLAH, S., WANG, H., ZHANG, D.Q., IMTIAZ, S., SHAN, G.C. and ZHENG, G.P., “Self-Assembly of 2D-Metal-Organic Frameworks/Graphene Oxides Membranes as Highly Efficient Adsorbent for the Removal of Cs+ from Aqueous Solutions”, RSC Advances, Vol. 8, pp.40813 (2018).
190 ZHANG, J.J., QI, P., LI, J., ZHENG, X.C., LIU, P., GUAN, X.X. and ZHENG, G.P., “Three-dimensional Fe2O3-TiO2-graphene Aerogel Composites with Enhanced Adsorption Capacity and Visible Light-driven Photocatalytic Performance for RhB Dye”, of Industrial and Engineering Chemistry, Vol. 61, pp.407-415 (2018).
191 ZHANG, D.Q., CHAI, J.X., CHENG, J.Y., JAI, Y.X., YANG, X.Y., WANG, H., ZHAO, Z.L., HAN, C., SHAN, G.C., ZHANG, W.J., ZHENG, G.P. and CAO,. M.S., “Highly Efficient Microwave Absorption Properties and Broadened Absorption Bandwidth of MoS2-iron Oxide Hybrids and MoS2-based Reduced Graphene Oxide Hybrids with Hetero-structures”, Applied Surface Science, Vol. 462, pp.872-882 (2018).
192 ZHANG, D.Q., CHENG, J.Y., CHAI, J.X., DENG, J.J., REN, R., SU, Y., WANG, H., MA, C.Q., LEE, C.S., ZHANG, W.J., ZHENG, G.P. and CAO, M.S., “Magnetic-field-induced Dielectric Behaviors and Magneto-electrical Coupling of Multiferroic Compounds Containing Cobalt Ferrite/Barium Calcium Titanate Composite Fibers”, Alloys and Compounds, Vol. 740, pp.1067-76 (2018).
193 CHENG, J.Y., CHEN, S.M., CHEN, D., DONG, L.B., WANG, J.J., ZHANG, T.L., JIAO, T.P., LIU, B., WANG, H., LAI, J.J., ZAPIEN, A., ZHENG, G.P., ZHI, L.J., KANG, F.Y. and ZHANG, W.J., “Editable Asymmetric All-Solid-State Supercapacitors Based on High-Strength, Flexible, and Programmable 2D-Metal-Organic Frameworks/Reduced Graphene Oxides Self-Assembled Papers”, of Materials Chemistry A, Vol. 6, No. 41, pp.20254-66 (2018).
194 ZHANG, D.Q., JIA, Y.X., CHENG, J.Y., CHEN, S.M., CHAI, J.X., YANG, X.Y., WU, Z.Y., WANG, H., ZHANG, W.J., ZHAO, Z.L., HAN, C., CAO, M.S. and ZHENG, G.P., “High-Performance Microwave Absorption Materials Based on MoS2-graphene Isomorphic Hetero-structures”, Alloys and Compounds, Vol. 758, pp.62-71 (2018).
195 LIU, T., LIANG, S., CHEN, F. and ZHU, J., “Inherent Losses Induced Absorptive Acoustic Rainbow Trapping with a Gradient Metasurface”, Journal of Applied Physics, Vol. 123, No. 9, pp.091702 (2018).
196 LIU, T., ZHU, X.F., CHEN, F., LIANG, S. and ZHU, J., “Parity-time Symmetry beyond One Dimension with All Passive Acoustic Metamaterials Crystal”, Physical Review Letters, Vol. 120, No. 12, pp.124502 (2018).
197 ZHAO, L., SHU, H., LIANG, S., SHI. X., AN, S., REN, W. and ZHU, J., “Torsional Wave Band Gap Properties in a Circular Plate of a Two-dimensional Generalized Phononic Crystal”, AIP Advances, Vol. 8, No. 5, pp.055317 (2018).