What's Hot?
Check out the following top most utilized facilities by our staff, researchers and students for the past six months.
Need our technical advice? Contact our technical workshops or our Technical Services Stream for help and advice.
Top Most Utilized Facilities
Most utilized facilities by staff, researchers and students for the past six months
Laser Cutting
Location: W401f
• Application: Material cutting and engraving
• Material: Non-metal materials (Acrylic, Plywood, Fabric, Leather, Fur, etc.)
• Max. Working Area: 1300 x 900mm
• Material Thickness: Acrylic (max 20mm), Plywood (max 10 mm)
• Data Format: dxf, cdr, ai
Hand Tools
Location: W401f
Work benches with basic hand tools, cutting tools, clamps, vises, etc.
Manual Machining
Location: U401
Major equipment includes:
- Centre Lathes
- Milling Machines
- Grinding Machines
- Bench Drill and Sawing Machine
Application: mainly for metal cutting
Soldering
Location: W311d
Bench fitting and assembly facilities Benches with the set-up for circuit assembly and testing: digital storage oscilloscope, signal generator, power supply and hand-tools
Polishing
Location: W401
• Cotton size: 6”x 1” and 8”x 1”
• Application substrate: Metals
• Motor power: 300W
UV Printing
Location: W401j
• Application: CMYK printing on non-mirror flat surfaces of different materials
• Material: Plastic, metal, glass, ceramics, wood, paper, etc.
• Max. Working Area: 20" x 13" x 3.9" (H)
• Max. Weight: up to 5kg
• Data Format: jpg (resolution not less than 2880dpi)
3D Printing
Location: W501
A variety of 3D Printers driven by different processes and technologies for different materials and applications
Abrasive Waterjet System for Rapid Precision Cutting
Location: W003a
• Suitable for glass, fibre reinforced composites, metal, wood, foam & plastic
• Max. cutting area: 300 x 300mm
• Max. material thickness: 25.4 mm
• Linear Positional Accuracy: ± 0.15mm
• Repeatability: ±0.08mm
Photo-chemical Machining
Location: W401
Physical Vapour Deposition System, Electroplating, Anodising and Dyeing of Alumnium Processes
Test (Impact/Hardness)
Location: W103 & W103e
A variety of material testing machines including Impact Tester, Hardness Tester, Micro-Hardness Tester and Universal Testing Machine
Electroplating Processes
• For metals: Steel, S.S, Zinc alloy, Cu alloy
• For non-metals: Resin, ABS, FDM
• Plating thickness: 0.1-200 um
• Electroforming Cu/Ni thickness: 100-500 um
• Electroless Ni deposition thickness: 10-30 um
Vacuum Forming
Location: W401f
• Application: Form plastic into permanent objects
• Material: PVC, PS, PU
• Max. working area: 30" x 25"
• Materials thickness: materials dependent