Faculty of Engineering

Current Students Prospective Students
Start main content
  1. Home
  2. Research
  3. Research Strength and Performance
  4. Outputs and Publications
  5. Research Outputs (2010 - 2011)

Research Outputs (2010 - 2011)

SKL_2050x500

Research book or monograph (author)

Academic research: not refereed

Serial No. Title/Brief Description Author(s)
1 Development of laser selective activation and metallization technology for the manufacturing of ceramic interconnect substrate (CIS). 1st Ed. The Hong Kong Polytechnic University, Hong Kong, 93pp (January 2011) ISBN 978-962-86893-9-2 YUNG, K.C.

 

Chapter in an edited book (author)

Academic research: not refereed

Serial No. Title/Brief Description Author(s)
2 "Design for supply chain with product development issues using cellular particle swarm optimization (CPSO) technique". In Tiwari, M. and Harding, J. A., eds., Evolutionary Computing in Advanced Manufacturing, Vol. Chapter 4, Scrivener Publishing LLC, Wiley, USA, pp.51-76 (2011) ISBN 978-0-470-63924-5 KUMAR, V. and CHAN, F.T.S.
3 "Introducing a hybrid genetic algorithm for integration of set up and process planning". In Tiwari, M. and Harding, J. A., eds., Evolutionary Computing in Advanced Manufacturing, Vol. Chapter 3, Scrivener Publishing LLC, Wiley, USA, pp.37-50 (2011) ISBN 978-0-470-63924-5 CHUNG, S.H. and CHAN, F.T.S.
4 "Modeling and analysis for supporting design of orthopaedic implants". In Cheung CF, Lee WB, Zhang M, To S, ed., Technical Guidebook for Supporting Design, Fabrication and Measurement of Orthopaedic Implants for Bio-medical Application, The Hong Kong Polytechnic University, Hong Kong, pp.24-57 (2011) WONG, WC, ZHANG, MING and CHEUNG, CF
5 "Need for the development of capability for supporting design, fabrication and measurement of superfinished orthopaedic implants". In Cheung CF, Lee WB, Zhang M, To S, ed., Chapter 1, in book: Technical Guidebook for Supporting Design, Fabrication and Measurement of Orthopaedic Implants for Bio-medical Application, The Hong Kong Polytechnic University, Hong Kong, pp.1-10 (2011) LEE, WB, CHEUNG, CF, ZHANG, MING and TO, S
6 "Overview of development of orthopaedic implants". In Cheung CF, Lee WB, Zhang M, To S, ed., Technical Guidebook for Supporting Design, Fabrication and Measurement of Orthopaedic Implants for Bio-medical Application, The Hong Kong Polytechnic University, Hong Kong, pp.11-23 (2011) ZHANG, MING, WONG, WC, QIN, L and CHEUNG, CF

 

Chapter in an edited book (author)

Academic research: refereed

Serial No. Title/Brief Description Author(s)
7 "3D Parametric Body Model Based on Chinese Female Anhtropometric Analysis". In Duffy V, ed., Digital Human Modeling, Lecture Notes in Computer Science, Vol. 6777, Springer, Germany, pp.22-29 (2011) ISBN 978-3-642-21798-2 PENG, S., CHAN, C.C., IP, W.H. and LUXIMON, A.
8 "A multi-agent framework for agile outsourced supply chains". In L. Wang and S. C. Lenny Koh, eds., Enterprise Networks and Logistics for Agile Manufacturing, Springer, UK, pp.207-226 (2010) ISBN 978-1-84996-243-8 MISHRA, N., KUMAR, V. and CHAN, F.T.S
9 "Exploring linkages between Personal Knowledge Management ". In D. Paulenn and G Gorman, ed., Personal Knowledge Management: Individual, Organisaational and Social Perspectives, Gower, United Kingdom, pp.189-228 (2011) ISBN 9780566088926 CHEONG, RICKY and TSUI, ERIC
10 "The Application of Harmony Search in Fourth-Party Logistics Routing Problems". In W.G. Zong, ed., Recent Advances In Harmony Search Algorithm, Springer-Verlag, Heidelberg, pp.135-145 (2010) ISBN 978-3-642-04316-1 BO, G., HUANG, M., IP, W.H. and WANG, X.W.

 

Edited book (editor)

Academic research: not refereed

Serial No. Title/Brief Description Author(s)
11 Technical Guidebook for Supporting Design, fabrication and Measurement of Orthopaedic Implants for Bio-medical Application. 1st Ed. The Hong Kong Polytechnic University, Hong Kong, 144pp (2011) ISBN 962367905 CHEUNG, CF, LEE, WB, ZHANG, MING and TO, S

 

Publication in refereed journal

Academic research: refereed

Serial No. Title/Brief Description Author(s)
12 "A Counterfeit Network Analyzer Based on RFID and EPC". INDUSTRIAL MANAGEMENT & DATA SYSTEMS, Vol. 110, No. 7, pp.1018-1037 (2010) KWOK, S.K., TING, S.L.#, TSANG, A.H.C. and CHEUNG, C.F.
13 "A Generalized Fuzzy Least-Squares Regression Approach to Modeling Functional Relationships in QFD". JOURNAL OF ENGINEERING DESIGN, Vol. 21, No. 5, pp.601-613 (2010) KWONG, C.K., CHEN, Y., CHAN, K.Y. and LUO, X.
14 "A Hybrid Knowledge-based Approach to Supporting the Medical Prescription for General Practitioners: Real Case in a Hong Kong Medical Center". KNOWLEDGE-BASED SYSTEMS, Vol. 24, No. 3, pp.444-456 (2011) TING, S.L.#, KWOK, S.K., TSANG, A.H.C. and LEE, W.B.
15 "A Model and Its Algorithm for Software Reuse Optimization Problem with Simultaneous Reliability and Cost Consideration". INTERNATIONAL JOURNAL OF INNOVATIVE COMPUTING INFORMATION AND CONTROL, Vol. 7, No. 5B, pp.2611-2621 (2011) WU, Z., TANG, J., KWONG, C.K. and CHAN, C.Y.
16 "A Multi Agent Based Model for Airport Service Planning ". INTERNATIONAL JOURNAL OF ENGINEERING BUSINESS MANAGEMENT, Vol. 2, No. 2, pp.93-100 (2010) IP, W.H., CHO, V., CHUNG, N. and HO, G.
17 "A Multi-faceted and Automatic Knowledge Elicitation System (MAKES) for Managing Unstructured Information". EXPERT SYSTEMS WITH APPLICATIONS, Vol. 38, No. 5, pp.5245-5258 (2011) CHEUNG, C.F., LEE, W.B., WANG, W.M., WANG, Y# and YEUNG, W.M.
18 "A Narrative-based reasoning with Applications in Decision Support for Social Service Organizations". EXPERT SYSTEMS WITH APPLICATIONS, Vol. 38, No. 4, pp.3336-3345 (2011) WANG, W.M. and CHEUNG, C.F.
19 "A Radio Frequency Identification and Sensor-based System for the Transportation of Food". JOURNAL OF FOOD ENGINEERING, Vol. 101, No. 1, pp.120-129 (2010) WANG, L.X.#, KWOK, S.K. and IP, W.H.
20 "A Scorecard-Markov model for new product screening decisions". INDUSTRIAL MANAGEMENT & DATA SYSTEMS, Vol. 110, No. 7, pp.971-992 (2010) CHAN, S.L.# and IP, W.H.
21 "A credibility-based fuzzy location model with Hurwicz criteria for the design of distribution systems in B2C e-commerce". COMPUTERS & INDUSTRIAL ENGINEERING, Vol. 59, No. 4, pp.873-886 (2010) LAU, H.C.W., JIANG, Z.Z., IP, W.H. and WANG, D.W.
22 "A flexible H.264/AVC compressed video watermarking scheme using particle swarm optimization based dither modulation". AEU-INTERNATIONAL JOURNAL OF ELECTRONICS AND COMMUNICATIONS, Vol. 65, No. 1, pp.27-36 (2011) WU, C.H.#, ZHENG, Y.,  IP, W.H., CHAN, C.Y., YUNG, K.L. and LU, Z.M.
23 "A hybrid scheduling decision support model for minimizing job tardiness in a make-to-order based mould manufacturing environment". EXPERT SYSTEMS WITH APPLICATIONS, Vol. 38, No. 3, pp.1931-1941 (2011) CHOY, K.L., LEUNG, Y.K., CHOW, H.K.H., POON, T.C.#, KWONG, C.K., HO, G.T.S. and KWOK, S.K.
24 "A methodology of integrating marketing with engineering for defining design specifications of new products ". JOURNAL OF ENGINEERING DESIGN, Vol. 22, No. 3, pp.201-213 (2011) KWONG, C.K., CHEN, Y. and CHAN, K.Y.
25 "A multiobjective optimization approach for product line design,, 58(1), pp. 97-108.". IEEE TRANSACTIONS ON ENGINEERING MANAGEMENT, Vol. 58, No. 1, pp.97-108 (2011) KWONG, C.K., LUO, X.G. and TANG, J.F.
26 "A new design rationale representation model for rationale mining". JOURNAL OF COMPUTING AND INFORMATION SCIENCE IN ENGINEERING, Vol. 10, No. 3, pp.031009 (2010) LIU, Y., LIANG, Y.#, KWONG, C.K. and LEE, W.B.
27 "A new intelligent system for senior executives to maintain remote control of their company". EXPERT SYSTEMS WITH APPLICATIONS, Vol. 31, No. 1, pp.736-742 (2011) JIANG, XIAONUO# and YUNG, KAI LEUNG
28 "A new linguistic MCDM method based on multiple-criterion data fusion". EXPERT SYSTEMS WITH APPLICATIONS, Vol. 38, No. 6, pp.6985-6993 (2011) DENG, Y., CHAN, F.T.S., WU, Y. and WANG, D.
29 "A new orthogonal array based crossover with analysis of gene interactions for evolutionary algorithms and its application to car door design". EXPERT SYSTEMS WITH APPLICATIONS, Vol. 37, No. 5, pp.3853-3862 (2010) CHAN, K.Y., KWONG, C.K., JIANG, H., AYDIN, M.E. and FOGARTY, T.C.
30 "A particle swarm optimization based memetic algorithm for dynamic optimization problems". Natural Computing, Vol. 9, pp.703-725 (2010) WANG, H.F., YANG, S.X., IP, W.H. and WANG, D.W.
31 "A prerequisite to achieving high performance polymer/inorganic thin film diodes". Solid State Communications, Vol. 150, No. 38, pp.1725-1728 (July 2010) LIEM, H.M., CHOY, H.S. and YUNG, K.C.
32 "A real-time production operations decision support system for solving stochastic production material demand problems". EXPERT SYSTEMS WITH APPLICATIONS, Vol. 38, No. 5, pp.4829-4838 (2011) POON, T.C.#, CHOY, K.L., CHAN, F.T.S. and LAU, H.C.W.
33 "A review of the corrosion of laser nitrided Ti-6Al-4V". ANTI-CORROSION METHODS AND MATERIALS, Vol. 58, No. 3, pp.140-154 (2011) RAZAVI, RS, GORDANI, GR and MAN, HC
34 "A solution method for the component allocation problem in printed circuit board assembly". ASSEMBLY AUTOMATION, Vol. 30, No. 2, pp.155-163 (2010) WU, YONGZHONG# and JI, PING
35 "A study of distribution center location based on the rough sets and interactive multi-objective fuzzy decision theory". ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (INCORPORATING 'COMPUTER INTEGRATED MANUFACTURING SYSTEMS'), Vol. 27, No. 2, pp.426-433 (2011) LIU, S., CHAN, F.T.S. and CHUNG, S.H.
36 "A study of laser induced activation of circuit lines and via-holes on AlN for electroless metal plating". Applied Surface Science, Vol. 257, No. 15, pp.6601-6606 (May 2011) YUNG, K.C., CHEN, C. and LEE, C.P.
37 "A study of regularly spaced shear bands and morphology of serrated chip formation in microcutting process". SCRIPTA MATERIALIA, Vol. 63, No. 2, pp.227-230 (Jul 2010) WANG, H.#, TO, S., CHAN, C.Y., CHEUNG, C.F. and LEE, W.B.
38 "A study of semi-rigid support on ankle supination sprain kinematics". SCANDINAVIAN JOURNAL OF MEDICINE & SCIENCE IN SPORTS, Vol. 20, No. 6, pp.822-826 (2010) TANG, YM, WU, ZH, LIAO, WH and CHAN, KM
39 "A study of the cutting-induced heating effect on the machined surface in ultra-precision raster milling of 6061 Al alloy ". INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 51, No. 1-4, pp.69-78 (2010) WANG, S.J.#, TO, S., CHAN, C.Y., CHEUNG, C.F. and LEE, W.B.
40 "Agent oriented petroleum supply chain coordination: Co-evolutionary Particle Swarm Optimization based approach". EXPERT SYSTEMS WITH APPLICATIONS, Vol. 38, No. 5, pp.6132-6145 (2011) SINHA, A.K., ADITYA, H.K., TIWARI, M.K. and CHAN, F.T.S.
41 "Aggregate procurement, production, and shipment planning decision problem for a three-echelon supply chain using swarm-based heuristics". INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, Vol. 49, No. 10, pp.2873-2905 (2011) PAL, A., CHAN, F.T.S., MAHANTY, B. and TIWARI, M.K.
42 "Airline Catering Service Operation, Schedule Nervousness and Collective Efficacy on Performance: Hong Kong Evidence". SERVICE INDUSTRIES JOURNAL, Vol. 31, No. 6, pp.959-974 (2011) LAW, K.M.Y
43 "An AHP model for selection of suppliers in the fast changing fashion market". INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 51, No. 9-12, pp.1195-1207 (2010) CHAN, F.T.S. and CHAN, H.K.
44 "An Integrated Manufacturing System for the Design, Fabrication, and Measurement of Ultra-Precision Freeform Optics". IEEE TRANSACTIONS ON ELECTRONICS PACKAGING MANUFACTURING, Vol. 33, No. 4, pp.244-254 (2010) KONG, L.B.#, CHEUNG, C.F., LEE, W.B. and TO, S.
45 "An examination of strategies under the financial tsunami". INDUSTRIAL MANAGEMENT & DATA SYSTEMS, Vol. 110, No. 9, pp.1319-1336 (2010) HO, G.T.S., CHOY, K.L., CHUNG, S.H. and LAM, C.H.Y.#
46 "Analysis of process parameters in laser structuring". Applied Physics A: Materials Science and Processing, Vol. 101, No. 2, pp.385-392 (November 2010) YUNG, K.C. and ZHANG, B.#
47 "Analysis of surface generation in ultra-precision machining with a fast tool servo ". PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, Vol. 224, No. B9, pp.1351-1367 (2010) KWOK, T.C.#, CHEUNG, C.F., KONG, L.B., TO, S. and LEE, W.B.
48 "Analyzing supply chain operation models with the PC-algorithm and the neural network. ". EXPERT SYSTEMS WITH APPLICATIONS, Vol. 38, No. 6, pp.7526-7534 (2010) WONG, T.C., LAW, K.M.Y, YAU, HON K and NGAN, S.C.
49 "Application of Genetic Approach for Advanced Planning in Multi-Factory Environment". INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS, Vol. 127, No. 2, pp.300-308 (2010) CHUNG, S.H., LAU, H.C.W., CHOY, K.L., HO, G.T.S. and TSE, Y.K.
50 "Assessing Knowledge Assets - Knowledge Audit of a Social Service Organization in Hong Kong". ADMINISTRATION IN SOCIAL WORK, Vol. 34, No. 4, pp.361-383 (2010) LEUNG, ZENO C.S., CHEUNG, C.F., CHU, K.F., CHAN, YUK-CHUNG, LEE, W.B. and WONG, ROBERT Y.W
51 "B2B multi-attribute e-procurement: an artificial immune system based goal programming approach". INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, Vol. 49, No. 2, pp.321-341 (2011) CHAN, F.T.S., SHUKLA, M., TIWARI, M.K., SHANKAR, R. and CHOY, K.L.
52 "Bio-activation of Ni-free Zr-based bulk metallic glass by surface modification". INTERMETALLICS, Vol. 18, pp.1978-1982 (2010) LIU, L, CHAN, KC, YU, Y and CHEN, Q
53 "Can Malaysian firms improve organizational/innovation performance via SCM?". INDUSTRIAL MANAGEMENT & DATA SYSTEMS, Vol. 111, No. 3, pp.410-431 (2011) CHONG, A.Y.L., CHAN, F.T.S., OOI, K.B. and SIM, J.J.
54 "Characterization and corrosion study of NiTi laser surface alloyed with Nb or Co". APPLIED SURFACE SCIENCE, Vol. 257, No. 8, pp.3269-3274 (2011) NG, K.W.#, MAN, H.C. and YUE, T.M.
55 "Characterization of Freeform Optics in Automotive Lighting Systems Using an Optical-Geometrical Feature Based Method". OPTIK, Vol. 122, No. 4, pp.358-363 (2011) KONG, L.B.#, CHEUNG, C.F., JIANG, J.B., TO, S. and LEE, W.B.
56 "Characterization of surface defects in fast tool servo machining of microlens array using a pattern recognition and analysis method ". MEASUREMENT, Vol. 43, No. 9, pp.1240-1249 (2010) CHEUNG, C.F., HU, K., JIANG, X.Q. and KONG, L.B.
57 "Characterization of surface generation of optical microstructures using a pattern and feature parametric analysis method ". PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, Vol. 34, No. 4, pp.755-766 (2010) KONG, L.B., CHEUNG, C.F., LEE, W.B., TO, S., JIANG, X.Q., BLUNT, L. and SCOTT, P.
58 "Chemorheological study of phosphorylated flame retardant epoxies". PLASTICS RUBBER AND COMPOSITES, Vol. 40, No. 1, pp.25-31 (February 2011) YUNG, K.C., WANG, J. and YUE, T.M.
59 "Closing the loop between design and market for new product idea screening decisions". EXPERT SYSTEMS WITH APPLICATIONS, Vol. 38, No. 6, pp.7729-7737 (2011) CHAN ,S.L.#, IP, W.H. and KWONG, C.K.
60 "Complete Modeling and Parameter Optimization for Virtual Ring Rolling". INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, Vol. 52, pp.1325-1333 (2010) WANG, Z.W., FAN, J.P., HU, D.P., TANG, C.Y. and TSUI, C.P.
61 "Complex Nonlinear Dynamics and Controlling Chaos in a Cournot Duopoly Economic Model". Nonlinear Analysis: Real World Applications, Vol. 11, No. 5, pp.4363-4377 (2010) WU, W.J., CHEN, Z.Q. and IP, W.H.
62 "Deformation simulation of IPMC smart material and its application in micro-gripper device". Advances in Vibration Engineering, Vol. 10, No. 1, pp.53-62 (2011) GONG, YQ, FAN, JP and TANG, CY
63 "Degradation mechanism beyond device self-heating in high power light-emitting diodes". Journal of Applied Physics, Vol. 109, No. 9, pp.094509-1-094509-6 (May 2011) YUNG, K.C., LIEM, H.M., CHOY, H.S. and LUN, W.K
64 "Design and Development of an RFID-based HIS - A Case Study". INTERNATIONAL JOURNAL OF ENGINEERING BUSINESS MANAGEMENT, Vol. 3, No. 1, pp.1-8 (2011) WU, C.H.#, IP, W.H., KWOK, S.K., HO, G.T.S and CHAN, C.Y.
65 "Design and development of a mobile EPC-RFID-based self-validation system (MESS) for product authentication ". COMPUTERS IN INDUSTRY, Vol. 61, No. 7, pp.624-635 (2010) KWOK, S.K., TING, S.L.#, TSANG, H.C., LEE, W.B. and CHEUNG, C.F.
66 "Design and development of logistics workflow systems for demand management with RFID". EXPERT SYSTEMS WITH APPLICATIONS, Vol. 38, No. 5, pp.5428-5437 (2011) LEE, C.K.M., HO, W., HO, G.T.S. and LAU, H.C.W.
67 "Determining Optimal Levels of Engineering Characteristics in quality Function Deployment under Multi-Segment Market". COMPUTERS & INDUSTRIAL ENGINEERING, Vol. 59, No. 1, pp.126-135 (2010) LUO, X.G., KWONG, C.K. and TANG, J.F.
68 "Development of Ni- and Cu-free Zr-based bulk metallic glasses for biomedical applications". MATERIALS TRANSACTIONS, Vol. 52, pp.61-67 (2011) LIU, Z, CHAN, KC and LIU, L
69 "Development of a Computational Simulation Model for Conflict Management in Team Building". INTERNATIONAL JOURNAL OF ENGINEERING BUSINESS MANAGEMENT, Vol. 3, No. 2, pp.9-15 (2011) WANG, W.M. and TING, S.L.#
70 "Die-swell behavior of PP/Al(OH)3/Mg(OH)2 flame retardent composite melts". POLYMER TESTING, Vol. 29, pp.624-628 (2010) LIANG, JZ, YANG ,J and TANG, CY
71 "Dynamic electropulsing induced phase transformations in a furnace cooled Zn-Al based alloy (ZA22)". MATERIALS TRANSACTIONS, Vol. 51, No. 11, pp.1977-2004 (Nov 2010) TO, S., ZHU, Y.H., LEE, W.B. and LIU, X.M.
72 "Dynamic modelling of shear band formation and tool-tip vibration in ultra-precision diamond turning ". INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, Vol. 50, No. 6, pp.512-519 (2011) WANG, H.#, TO, S., CHAN, C.Y., CHEUNG, C.F. and LEE,W .B.
73 "Effect of laser surface melting on intergranular corrosion behaviour of aged austenitic and duplex stainless steels". CORROSION SCIENCE, Vol. 53, No. 4, pp.1581-1591 (Apr 2011) KWOK, CT, LO, KH, CHAN, WK, CHENG, FT and MAN, HC
74 "Effective Hill Climbing Algorithm for Optimality of Robust Watermarking in Digital Images". Information Technology Journal, Vol. 10, pp.246-256 (2011) WU, C.H.#, ZHENG, Y., IP, W.H., LU, Z.M., CHAN, C.Y. and YUNG, K.L.
75 "Effects of Filler Content on Mechanical Properties of Macroporous Composites". COMPOSITE INTERFACES, Vol. 17, pp.571-579 (2010) TSUI, C.P., TANG, C.Y., GUO, Y.Q., USKOKOVIC, P.S., FAN, J.P. and GAO, B.
76 "Encapsulated Zr-based bulk metallic glass with large plasticity". MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 528, pp.2988-2994 (2011) CHEN, W#, CHAN, KC, YU, P and WANG, G
77 "Enhanced glass forming ability and refrigerant capacity of a Gd55 Ni22Mn3Al20 bulk metallic glass". JOURNAL OF ALLOYS AND COMPOUNDS, Vol. 509, pp.6640-6643 (2011) XIA, L, CHAN, KC and TANG, MB
78 "Enhanced plasticity of a Zr50Cu48Al2 bulk metallic glass". JOURNAL OF NON-CRYSTALLINE SOLIDS, Vol. 357, pp.1469-1472 (2011) XIA, L, CHAN, KC, KWOK, SK and YU, P
79 "Enhancement of plasticity and toughness in monolithic Zr-based bulk metallic glass by heterogeneous microstructure". SCRIPTA MATERIALIA, Vol. 64, pp.609-612 (2011) REN, HT, PAN, J, CHEN, Q, CHAN, KC, LIU, Y and LIU, L
80 "FMS scheduling with knowledge based genetic algorithm approach". EXPERT SYSTEMS WITH APPLICATIONS, Vol. 38, No. 4, pp.3161-3171 (2011) PRAKASH, A., CHAN, F.T.S. and DESHMUKH, S.G.
81 "Fabrication and Characterization of Bioglass Modified HA-ZrO2 Biocomposites". COMPOSITE INTERFACES, Vol. 17, pp.551-558 (2010) MENG, Y.H.#, TANG, C.Y. and TSUI, C.P.
82 "Fabrication of integrated resistors in printed circuit boards". JOURNAL OF CENTRAL SOUTH UNIVERSITY OF TECHNOLOGY, Vol. 18, No. 3, pp.739-743 (2011) WANG, SG and CHAN, CY
83 "Fabrication of poly(lactic acid) scaffolds by a modified solvent casting/porogen leaching method". E-POLYMER, No. 113, pp.1-9 (2010) GONG, XH, TANG, CY, WONG, CT, LU, WWJ, ZHANG, YG, LAM, WM, WU, SP and LIU, JN
84 "Finite Element Analysis of Contact Pressures Between Seat Cushion and Human Buttock-Thigh Tissue". Engineering, Vol. 2, pp.720-726 (2010) TANG, C.Y., CHAN, W and TSUI, C.P.
85 "Finite element modelling of squeezing effect in ultra precision diamond turning". MATERIALS RESEARCH INNOVATIONS, Vol. 15, pp.S175-S178 (2011) (Supplement 1) TO, S. and WANG, H.#
86 "Flexible dissipative particle dynamics". INTERNATIONAL JOURNAL OF MODERN PHYSICS C, Vol. 21, No. 9, pp.1129 -1148 (2010) HUANG, Z.G., YUE, T.M., CHAN, K.C. and GUO, Z.N.
87 "Focus/Will/Capability (F/W/C) System Based Organizational Learning Performance Evaluation Instrument, A". The International Journal of Knowledge Culture and Change Management, Vol. 10, No. 6, pp.31-50 (2011) CHUAH, K.B., CHRIS R, CAO, CHAU, Y.C., KWONG, K.F. and LAW, K.M.Y
88 "Fuzzy measurement in quality management systems". Studies in Fuzziness and Soft Computing, Vol. 252, pp.515-536 (2010) HO, G.T.S., LAU, H.C.W., CHUNG, N.S.H. and IP, W.H.
89 "High thermal conductivity of polyethylene nanowire arrays fabricated by an improved nanoporous template wetting technique". POLYMER, Vol. 52, No. 8, pp.1711-1715 (2011) CAO, BING-YANG, LI, YW, KONG, JIE, CHEN, H, XU, YAN, YUNG, KL and CAI, A
90 "Impact of plasma etching on fabrication technology of liquid crystal polymer printed circuit board". Journal of Material Science: Materials in Electronics, Vol. 21, No. 9, pp.954-962 (September 2010) YUNG, K.C., LIEM, H., CHOY, H.S. and YUE, T.M.
91 "Implementation of ERP of the Australian manufacturing companies". INDUSTRIAL MANAGEMENT & DATA SYSTEMS, Vol. 111, No. 1, pp.132-145 (2011) HASAN, M., TRINH, N.T., CHAN, F.T.S., CHAN, H,K, and CHUNG, S.H.
92 "Implementing just-in-time philosophy to reverse logistics systems: a review". INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, Vol. 48, No. 21, pp.6293-6313 (2010) CHAN, H.K., YIN, S. and CHAN, F.T.S.
93 "Improving the productivity of order picking of a manual-pick and multi-level rack distribution warehouse through the implementation of class-based storage". EXPERT SYSTEMS WITH APPLICATIONS, Vol. 38, No. 3, pp.2686-2700 (2011) CHAN, F.T.S. and CHAN, H.K.
94 "In situ synthesis and fabrication of tricalcium phosphate bioceramic coating on commerically pure titanium by laser rapid forming". SURFACE & COATINGS TECHNOLOGY, Vol. 204, pp.3833-3837 (2010) HU, J, WANG, ZY, GUAN, TH, GAO, Y, LV, XW, LIN, X, TANG, CY and GAO, B
95 "Ink-jet Printing and Camera Flash Sintering of Silver Tracks on Different Substrates". Journal of Materials Processing Technology, Vol. 210, No. 15, pp.2268-2272 (November 2010) YUNG, K.C. and GU, X.
96 "Integration of manufacturing and distribution networks in a global car company- Network models and numerical simulation". INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, Vol. 49, No. 11, pp.3127-3149 (2011) SAMARANAYAKE, P., LAOSIRIHONGTHONG, T. and CHAN, F.T.S.
97 "Knowledge Mining Wikipedia: An Ontological Approach". INTERNATIONAL JOURNAL OF KNOWLEDGE AND SYSTEMS SCIENCE, Vol. 2, No. 1, pp.50-60 (2011) LEE, HERBERT#, CHAN, KEITH and TSUI, ERIC
98 "Laser Acupuncture and Prevention of Bone Loss in Tail-Suspended Rats". AVIATION SPACE AND ENVIRONMENTAL MEDICINE, Vol. 81, No. 10, pp.914-918 (Oct 2010) GUO, X, LIU, MQ, MAN, HC, WANG, XY, MU, JJ, LI, YZ, FENG, JS, SHI, SQ and ZHANG, M
99 "Laser Forming of Zr-Based Coatings on AZ91D Magnesium Alloy Substrates for Wear and Corrosion Resistance Improvement". MATERIALS TRANSACTIONS, Vol. 52, No. 4, pp.810 -813 (2011) YUE, T.M. and HUANG, K.J.
100 "Laser welding of thin foil nickel-titanium shape memory alloy". OPTICS AND LASERS IN ENGINEERING, Vol. 49, No. 1, pp.121-126 (Jan 2011) CHAN, CW# and MAN, HC
101 "Low cost fabrication of microelectrodes on plastic substrate". MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, Vol. 17, No. 3, pp.361-366 (2011) XU, YAN, HUANG, LB, YUNG, KL, XIE, YC and LEE, MH
102 "Measurement and characterization of ultra-precision freeform surfaces using an intrinsic surface feature-based method ". MEASUREMENT SCIENCE AND TECHNOLOGY, Vol. 21, No. 11, pp.1-15 (2010) ( doi:10.1088/0957-0233/21/11/115109) CHEUNG, C.F., KONG, L.B. and REN, M.J.#
103 "MediSys: A Radio Frequency Identification-based Electronic Medical Record System for Improving Medical Information Accessibility and Services at Point of Care". Health Information Management Journal, Vol. 40, No. 1, pp.25-32 (2011) TING, S.L.#, TSANG, A.H.C., IP, A.W.H. and HO, G.T.S.
104 "Melt density and volume flow rate of polypropylene/Al(OH)3/Mg(OH)2 flame retardant composites". JOURNAL OF APPLIED POLYMER SCIENCE, Vol. 118, pp.332-337 (2010) LIANG, JZ, TANG, CY and ZHANG, YJ
105 "Melt shear viscosity of PP/Al(OH)3/Mg(OH)2 flame retardant composites at high extrusion rates". JOURNAL OF APPLIED POLYMER SCIENCE, Vol. 119, pp.1835-1841 (2011) LIANG, JZ, YANG, J and TANG, CY
106 "Microstructure and mechanical properties of selective laser melted magnesium". APPLIED SURFACE SCIENCE, Vol. 257, No. 17, pp.7447-7454 (15 Jun 2011) NG, CC#, SAVALANI, MM, LAU, ML and Man, HC
107 "Minimization of order tardiness through collaboration strategy in multifactory production system". IEEE SYSTEMS JOURNAL, Vol. 5, No. 1, pp.40-49 (2011) CHUNG, S.H., CHAN, F.T.S. and IP, W.H.
108 "Model scenario for integrated environmental product assessment at the use of raw material stage of a product". Resources, Conservation & Recycling, Vol. 54, No. 11, pp.841-850 (September 2010) WONG, Y.L., LEE, K.M. and YUNG, K.C.
109 "Modeling Skin Deformation Using Boundary Element Method". COMPUTER-AIDED DESIGN & APPLICATIONS, Vol. 7, No. 1, pp.101-108 (2010) TANG, YM
110 "Modeling a liquid epoxy molding process using a particle swarm optimization based fuzzy regression". IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS, Vol. 7, No. 1, pp.148-158 (2011) CHAN, K.Y., DILLON, T. and KWONG, C.K.
111 "Modeling customer satisfaction for new product development using genetic programming". JOURNAL OF ENGINEERING DESIGN, Vol. 22, No. 1, pp.55-68 (2011) KWONG, C.K., CHAN, K.Y. and WONG, T.C.
112 "Monte Carlo simulation of dual magnetic phase behavior in bulk metallic glasses". JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, Vol. 322, pp.2567-2570 (2010) HU, Y#, CHAN, KC, LIU, L and YANG, YZ
113 "Multi-facet product information search and retrieval using semantically annotated product family ontology". INFORMATION PROCESSING AND MANAGEMENT, Vol. 46, No. 4, pp.479-493 (Jul 2010) LIM, SCJ#, LIU, Y and LEE, WB
114 "Multiresponse optimization of surface plasma treatment using Taguchi method". Materials and Manufacturing Processes, Vol. 25, No. 9, pp.1001-1011 (September 2010) YUNG, K.C., LIEM, H., CHOY, H.S., ZHENG, H.F. and YUE, T.M.
115 "Non-periodic boundary model with soft transition in molecular dynamics simulation". EUROPHYSICS LETTERS, Vol. 92, No. 5 (2010) (Article Number: 50007) HUANG, Z.G., GUO, Z.N., YUE, T.M. and CHAN, K.C.
116 "On the integrated charge planning with flexible jobs in primary steelmaking processes". INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, Vol. 48, No. 21, pp.6499-6535 (2010) DONG, H., HUANG, M., IP, W.H. and WANG, X.
117 "Operation allocation in automated manufacturing system using GA-based approach with multifidelity models". ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (INCORPORATING 'COMPUTER INTEGRATED MANUFACTURING SYSTEMS'), Vol. 26, No. 5, pp.526-534 (2010) CHAN, F.T.S., CHAUBE, A., MOHAN, V., ARORA, V. and TIWARI, M.K.
118 "Optimization of parts scheduling in multiple cells considering intercell move using scatter search approach". JOURNAL OF INTELLIGENT MANUFACTURING, Vol. 21, No. 4, pp.525-537 (2010) (link) TANG, JIAFU, WANG, XIAOQING, IKO, KAKU and YUNG, KAI-LEUNG
119 "Optimization of software components selection for component-based software system development,". COMPUTERS & INDUSTRIAL ENGINEERING, Vol. 58, No. 4, pp.618-624 (2010) KWONG, C.K., MU, L.F., TANG, J.F. and LUO, X.
120 "Optimized Particles for 3-D Tracking". LECTURE NOTES IN COMPUTER SCIENCE (SPRINGER), Vol. 6424, No. 1, pp.749-761 (2010) CHEN, HUIYING and LI, YOUFU
121 "Optimizing patrol force deployment using a genetic algorithm". EXPERT SYSTEMS WITH APPLICATIONS, Vol. 37, No. 12, pp.8148-8154 (2010) LAU, H.C.W., HO, G.T.S., ZHAO, Y.# and HON, W.T.#
122 "Parameter optimization for the visco-hyperelastic constitutive model of tendon using FEM". BIO-MEDICAL MATERIALS AND ENGINEERING, Vol. 21, pp.9-24 (2011) TANG, C.Y., NG, G.Y.F., WANG, Z.W., TSUI, C.P. and ZHANG, G.
123 "Phase evolution and dendrite growth in laser cladding of aluminium on zirconium". JOURNAL OF ALLOYS AND COMPOUNDS, Vol. 509, No. 8, pp.3705-3710 (2011) YUE, T.M., XIE, H., LIN, X. and YANG, H.O.
124 "Photolamination Bonding for PMMA Microfluidic Chips". MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, Vol. 16, No. 11, pp.1887-1891 (2010) XIE, YUNCHUAN, XU, YAN, YUNG, KAI-LEUNG, HUANG, LONGBIAO and LEE, MING-HUNG
125 "Plasticity improvement of an Fe-based bulk metallic glass by geometric confinement". MATERIALS LETTERS, Vol. 65, pp.1172-1175 (2011) CHEN, W#, CHAN, KC, GUO, SF and YU, P
126 "Polynomial modeling for time-varying systems based on a particle swarm optimization algorithm,". INFORMATION SCIENCES, Vol. 18, No. 19, pp.1623-1640 (2011) CHAN, K.Y., DILLON, T. and KWONG, C.K.
127 "Prediction of forming limit diagrams based on shear failure criterion". INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, Vol. 47, No. 21, pp.2855-2865 (2010) LIN, J, CHAN, LC and WANG, L
128 "RACER: Rule-Associated CasE-based Reasoning for Supporting General Practitioners in Prescription Making". EXPERT SYSTEMS WITH APPLICATIONS, Vol. 37, No. 12, pp.8079-8089 (2010) TING, S.L.#, WANG, W.M., KWOK, S.K., TSANG, A.H.C. and LEE, W.B.
129 "Reaching a destination earlier by starting later: Revisited". TRANSPORTATION RESEARCH PART E-LOGISTICS AND TRANSPORTATION REVIEW, Vol. 47, pp.641-647 (2011) QIAN, C#, CHAN, CY and YUNG, KL
130 "Reducing overfitting in manufacturing process modeling using a backward elimination applied soft computing". APPLIED SOFT COMPUTING, Vol. 11, No. 2, pp.1648-1656 (2011) CHAN, K.Y., KWONG, C.K., TSIM, Y.C. and DILLON, T.S.
131 "Removal of Single Point Diamond-turning Marks by Abrasive Jet Polishing". APPLIED OPTICS, Vol. 50, No. 16, pp.2458-2463 (2011) LI, Z.Z., WANG, J.M., PEN, X.Q., HO, L.T.#, YIN, Z.Q., LI, S.Y. and CHEUNG, C.F.
132 "Rethinking hospital general ward ventilation design using computational fluid dynamics". JOURNAL OF HOSPITAL INFECTION, Vol. 77, No. 1, pp.31-36 (2011) YAM, R, YUEN, P.L., YUNG, R and CHOY, T
133 "Rheological characterization and statistical modeling of resin Flow of No-Flow Polyimide Prepreg in Rigid-Flex Printed Circuit (RFPC) Lamination". Journal of Composite Materials, Vol. 45, No. 2, pp.171-186 (February 2011) HUANG, S.Q.# and YUNG, K.C.
134 "Selective laser processing of ink-jet printed nano-scaled tin-clad copper particles". Applied Physics A: Materials Science and Processing, Vol. 101, No. 2, pp.393-397 (November 2010) YUNG, K.C. and PLURA, T.S.
135 "Simulation of micro-indentation hardness of FCC single crystals by mechanism-based strain gradient crystal plasticity ". INTERNATIONAL JOURNAL OF PLASTICITY, Vol. 26, No. 10, pp.1527-1540 (2010) LEE, W.B. and CHEN, Y.P
136 "Social Responsibility in Youth Service Organizations: Hong Kong Evidence. The Services Industries Journal". SERVICE INDUSTRIES JOURNAL, Vol. 31, No. 9, pp.1505-1517 (2011) LAW, K.M.Y
137 "Social motives polarity and its impact on knowledge sharing". VINE, Vol. 41, No. 1, pp.76-88 (2011) SABETZADEH, FARZAD and TSUI, ERIC
138 "State of the art literature review on performance measurement". COMPUTERS & INDUSTRIAL ENGINEERING, Vol. 60, pp.279-290 (2011) NUDURUPATI, S., BITITCI, U.S., KUMAR, V. and CHAN, F.T.S.
139 "Sustainability development in Taiwan high-tech manufacturing industry". Asia Pacific Management Review, Vol. 15, No. 4, pp.619-633 (2010) LAW, K.M.Y
140 "Sustaining effective business value chain: future challenges.". INDUSTRIAL MANAGEMENT & DATA SYSTEMS, Vol. 110, No. 8, pp.1176-1191 (2010) LAW, K.M.Y
141 "System monitoring through element flow reasoning". ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (INCORPORATING 'COMPUTER INTEGRATED MANUFACTURING SYSTEMS'), Vol. 27, pp.221-233 (2011) QIAN, C#, CHAN, CY, TANG, CS# and YUNG, KL
142 "TaxoFolk: A hybrid taxonomy-folksonomy structure for knowledge classification and navigation". EXPERT SYSTEMS WITH APPLICATIONS, Vol. 38, No. 5, pp.6049-6058 (2011) KIU, CC and TSUI, ERIC
143 "The Formation of b-Polypropylene Crystals in a Compatibilized Blend of Isotactic Polypropylene and Polyamide-6". POLYMER ENGINEERING AND SCIENCE, Vol. 51, pp.403-410 (2011) ZHANG, R.H., SHI, D.A., TSUI, C.P., TANG, C.Y., TJONG, S.C. and LI, R.K.Y.
144 "The Study on Using Passive RFID Tags for Indoor Positioning". INTERNATIONAL JOURNAL OF ENGINEERING BUSINESS MANAGEMENT, Vol. 3, No. 1, pp.9-15 (2011) TING, S.L.#, KWOK, S.K., TSANG, A.H.C. and HO, G.T.S.
145 "The effect of low-energy laser irradiation on apoptotic factors following experimentally induced transient cerebral ischemia". NEUROSCIENCE, Vol. 190C, pp.301-306 (2011) YIP, KK, LO, SAMUEL CL, LEUNG, MCP, SO, KF, TANG, CY and POON, DMY
146 "The effect of microalloying on mechanical properties in CuZrAl bulk metallic glass". JOURNAL OF ALLOYS AND COMPOUNDS, Vol. 504S, pp.S74-S77 (2010) PAN, J, CHAN, KC, CHEN, Q, LI,N, GUO, SF and LIU, L
147 "The impact of collaborative transportation management on supply chain performance: A simulation approach". EXPERT SYSTEMS WITH APPLICATIONS, Vol. 38, No. 3, pp.2319-2329 (2011) CHAN, F.T.S. and ZHANG, T.
148 "Thermal investigation and placement design of high-brightness LED array package on PCB for uniform illuminance". JOURNAL OF ELECTRONIC PACKAGING, Vol. 133, No. 3, pp.1-14 (March 2011) YUNG, K.C., LIEM, H.M. and CHOY, H.S.
149 "Thermal performance of high-brightness LED array package on PCB". International Communications in heat and mass transfer, Vol. 37, No. 9, pp.1266-1272 (November 2010) YUNG, K.C., LIEM, H.M., CHOY, H.S. and LUN, W.K.
150 "Thermo-migration and electro-migration in Sn58Bi ball grid array solder joints". Journal of Material Science: Materials in Electronics, Vol. 21, No. 10, pp.1090-1098 (October 2010) GU, X, YUNG, K.C. and CHAN, Y.C.
151 "Thermomigration and electromigration in Sn8Zn3Bi solder joints". Journal of Material Science: Materials in Electronics, Vol. 22, No. 3, pp.217-222 (March 2011) GU, X., YUNG, K.C., CHAN, Y.C. and YANG, D.
152 "Two-level chaos-based video cryptosystem on H.263 codec". NONLINEAR DYNAMICS, Vol. 62, No. 3, pp.647-664 (2010) CHEN, Z.Q., IP, W.H., CHAN, C.Y. and YUNG, K.L.
153 "Use of EBSD to study electropulsing induced reverse phase transformations in a Zn-Al alloy (ZA22)". JOURNAL OF MICROSCOPY-OXFORD, Vol. 242, No. 1, pp.62-69 (Apr 2011) ZHU, Y.H., TO, S. and LIU, X.M.
154 "Using Integer Programming for Airport Service Planning in Staff Scheduling". INTERNATIONAL JOURNAL OF ENGINEERING BUSINESS MANAGEMENT, Vol. 2, No. 2, pp.85-92 (2010) IP, W.H., CHUNG, N. and HO, G.
155 "Visualization of the protein coding regions with a self adaptive spectral rotation (SASR) approach". NUCLEIC ACIDS RESEARCH, Vol. 39, No. 1, pp.e3 (2011) CHEN, BO# and JI, PING
156 "Wettability of Polyethylene Micropatterns with Aligned One-Dimensional Nanostructures". Journal of Macromolecular Science Part B-Physics, Vol. 49, No. 4, pp.711-722 (2010) KONG, JIE, YUNG, KAI-LEUNG, XU, YAN and XIE, YUANCHUAN
157 "Wettability transition of plasma-treated polystyrene micro/nano pillars-aligned patterns". Express Polymer Letters, Vol. 4, No. 12, pp.753-762 (2010) KONG, JIE, YUNG, KAI-LEUNG, XU, YAN and TIAN, WEI

 

Publication in policy or professional journal

Academic research: not refereed

Serial No. Title/Brief Description Author(s)
158 "Determination of the success factors in supply chain networks: a Hong Kong-based manufacturer's perspective". Measuring Business Excellence, Vol. 15, No. 1, pp.34-48 (2011) LAO, S.I.#, CHOY, K.L., HO, G.T.S., TSIM, Y.C. and CHUNG, N.S.H.

 

Invited conference paper

Academic research: not refereed

Serial No. Title/Brief Description Author(s)
159 "An Integrated Platform for Supporting Design and Ultra-precision Polishing Orthopaedic Implants". Proceedings of The 2nd International Conference on Nanomanufacturing (nanoMan 2010), 1st CIRP Conference on Nanomanufacturing, Tianjin, China, Sept 24-26 (2010) (CD Version - Paper 374) CHEUNG, C.F.
160 "Effect of Laser Acupuncture Therapy on Bone and Articular Cartilage under Simulated Microgravity". In Lim TC, Goh JCH, ed., WCB 2010, IFMBE Proceedings, Vol. 31, Singapore, 1-6 Aug 2010, Springer, pp.852-855 (2010) WANG, Q, GUO, X, WANG, XY, LIU, MQ, ZHANG, M, ZHENG, YP and MAN, HC
161 "Effect of cutting strategy on surface generation in ultra-precision raster milling". 2nd International Conference on Nanomanufacturing, 1st CIRP Conference on Nanomanufacturing, Tianjin, China, 24-26 Sep 2010 (2010) (CD version, paper no.380) TO, S. and WANG, S.J.#

 

Refereed conference paper

Academic research: refereed

Serial No. Title/Brief Description Author(s)
162 "3D Model Retrieval based on Fuzzy Weighted Shape Distributions". Advanced Materials Research / The International Conference on Manufacturing Science and Engineering (ICMSE 2011), Vol. 201-203, Guilin, China, 9-11 April 2011, pp.1678-1681 (Apr 2011) (link) CHEN, Z.Q., ZOU, K.S., IP, W.H. and CHAN, C.Y.
163 "A Context-aware and Reality-based Learning System". Proceedings of International Technology, Education and Development Conference (INTED) 2011, Valencia, Spain, 7-9 March 2011, pp.5307-5312 (2011) (CD ROM format) TSANG, A.H.C. and TING, S.L.#
164 "A Framework of a Process Modelling and Optimization System for the Design, Fabrication and Evaluation of Progressive Lens". Proceedings of 11th International Conference of the European Society for Precision Engineering and Nanotechnology (EUSPEN2011), Vol. 2, Lake Como, Italy, May 23-27, pp.409-412 (2011) CHEUNG, C.F., HO, L.T.#, KONG, L.B., TO, S. and LAI, K.T.
165 "A Framework of a Surface Feature Pattern Analysis Method for Form Characterization of Ultra-precision Freeform Surfaces". Proceedings of The 2nd International Conference on Nanomanufacturing (nanoMan 2010), 1st CIRP Conference on Nanomanufacturing, Tianjin, China, Sept 24-26 (2010) (CD Version - Paper 338) REN, M.J.#, CHEUNG, C.F. and KONG, L.B.
166 "A Novel 3D Model Retrieval Approach based on Model-partitioning and Fuzzy Relevance Feedback". Advanced Materials Research / The the International Conference on Smart Materials and Intelligent Systems (SMIS 2010), Vol. 143-144, Chongqing, China, 17-20 December 2010, pp.186-190 (Dec 2010) (link) ZOU, K.S., WU, C.H.#, IP, W.H., CHAN, C.Y., YUNG, K.L. and CHEN, Z.Q.
167 "A Study of Machining Strategy in Computer Controlled Ultra-precision Polishing of Structured Surfaces". Proceedings of American Society for Precision Engineering's 25th Annual Meeting, Atlanta, GA, USA, Oct 31 - Nov 5, pp.281-284 (2010) CHEUNG, C.F., HO, L.T.#, KONG, L.B. and TO, S.
168 "A Study of Task Specific Uncertainty for Least Square Based Form Characterization of Ultra-precision Freeform Surfaces ". Proceedings of the 10th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII-2011), Daejeon, S. Korea, June 29-July 2 (2011) (Electronic version) CHEUNG, C.F., REN, M.J.# and KONG, L.B.
169 "A Study of the Generation and Characterization of 3D Micro-structured Surfaces with Self-cleaning and Optical Functions". Proceedings of the 10th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII-2011), Daejeon, S. Korea,, June 29 - July 2 (2011) (Electronic version) KONG, L.B., CHEUNG, C.F., TO, S. and CHENG, C.T.#
170 "A cross-border workflow management framework for measuring the performance of warehouse operations". Proceedings of 8th International Conference on Supply Chain Management and Information Systems (SCMIS2010), Hong Kong, Chin, 6-8 October, 2010, pp.1-8 (2010) LAM, H.Y.#, CHOY, K.L., CHUNG, S.H. and POON, T.C.#
171 "A framework for successful implementation of E-Kanban: A case study based approach". The 21st International Conference of Flexible Automation and Intelligent Manufacturing (FAIM 2011), Feng Chia University, Taichung, Taiwan, June 26-29, 2011 (2011) (CD ROM format) MACKERRON, G., KUMAR, M., KUMUR, V. and CHAN, F.T.S.
172 "A leagile inspired supply chain model to improve the performance of steel industries". The 21st International Conference of Flexible Automation and Intelligent Manufacturing (FAIM 2011), Feng Chia University, Taichung, Taiwan, June 26-29, 2011 (2011) (CD ROM format) KUMAR, V., MISHRA, N., CHAN, F.T.S., KUMAR, M. and MACKERRON, G.
173 "A novel method for the design and ultra-precision machining of the hybrid optical surface of single BD/ CBHD compatible objective lens". Proceedings of the 11th euspen International Conference, Vol. 2, Lake como, Itay, 23-27 May 2011, pp.471-475 (2011) LI, L.H., LEE, W.B., TO, S., WANG, W.K. and YIP, M.S.
174 "A quality risk model based on supply chain perspective". Proceedings of 8th International Conference on Supply Chain Management and Information Systems (SCMIS2010), Hong Kong, China, 6-8 October, 2010, pp.541-546 (2010) ZHEN, HONG, LEE, C.K.M. and CHOY, K.L.
175 "A real-time replenishment system for vending machine industry". 8th IEEE International Conference on Industrial Informatics (INDIN) 2010, Osaka, Japan, July 13-16, 2010, pp.209-213 (2010) POON, T.C.#, CHOY, K.L., CHENG, C.K. and LAO, S.I.#
176 "A stock modulation system for managing and fulfilling new demand chain deployment". Proceedings of 8th International Conference on Supply Chain Management and Information Systems (SCMIS2010), Hong Kong, China, 6-8 October, 2010, pp.296-302 (2010) LUK, C.C., CHOY, K.L., TAM, SIDNEY K.T. and LAO, S.I.#
177 "A study of an integrated approach for design, ultra-precision machining and characterization of micro-structured surface with self-cleaning properties". 2nd International Conference on Nanomanufacturing, 1st CIRP Conference on Nanomanufacturing, Tianjin, China, 24-26 Sep 2010 (2010) (CD version, paper no. 337) KONG, L.B., TO, S. and CHEUNG, C.F.
178 "A study of cutting force variation influencing surface topography in ultra-precision machining". 2nd International Conference on Nanomanufacturing, 1st CIRP Conference on Nanomanufacturing, Tianjin, China, 24-26 Sep 2010 (2010) (CD version, paper no. 358) ZHANG, S.J.#, TO, S., CHAN, C.Y. and CHEUNG, C.F.
179 "Acceptance of E-cash and Usage Implications of Associated System: The case of Mobile-Online Gaming Services". The 8th International Conference on Supply Chain Management and Information Systems (SCMIS 2010), Hong Kong, 6-8 October, 2010 (2010)(pp.1-9) SEE-TO, ERIC WING KUEN and WESTLAND, J. CHRISTOPHER
180 "An Experimental Investigation on Heat Generation in Ultra-precision Raster Milling". 2nd International Conference on Nanomanufacturing, 1st CIRP Conference on Nanomanufacturing, Tianjin, China, 24-26 Sep 2010 (2010) (CD version, paper no. 355) WANG, S.J.#, TO, S. and CHEUNG, C.F.
181 "An Integrative Food Handling System for Managing Inventory Information in Food Warehouses". Portland International Conference for Management of Engineering and Technology 2010 (PICMET’10), Phuket, Thailand, 18 - 22 July 2010, pp.1371-1377 (2010) LAO, S.I.#, CHOY, K.L., TSIM, Y.C., KWOK, S.K. and POON, T.C.#
182 "An RFID-based Drug Management System: A Case In Medical Organization". Proceedings of INNOV 2010 - International Multi-Conference on Innovative Developments in ICT, Athens, Greece, 29 - 31 July, 2010, pp.99-107 (2010) TING, S.L.#, KWOK, S.K., TSANG, A.H.C. and LEE, W.B.
183 "Application of the tacit signal method for performance management in project-based action learning teams". Technology Innovation and Industrial Management, Finland, June 2011 (2011) LAW, K.M.Y and KESTI, MARKO
184 "B2B diffusion in SME's supply chain: A multi-stage analysis". The 21st International Conference of Flexible Automation and Intelligent Manufacturing (FAIM 2011), Feng Chia University, Taichung, Taiwan, June 26-29, 2011 (2011) (CD ROM format) CHAN, F.T.S. and CHONG, A.Y.L.
185 "COHEALS: A Context--aware Healthcare Learning System for Medical Equipments Usage Education". Proceedings of International Technology, Education and Development Conference (INTED) 2011, Valencia, Spain , 7-9 March 2011, pp.1928-1932 (2011) (CD format) TING, S.L.#, TSANG, A.H.C. and IP, W.H.
186 "Cloud-based Personal Knowledge Management as a Service". In Xue Shengjun, ed., International Conference on Computer Science and Service System, Nanjing, China, 27-29th June 2011, Nanjing, China, pp.2152-2155 (2011) TSUI, ERIC, CHEONG, RICKY and SABETZADEH, FARZAD#
187 "Collaborative commerce technologies adoption for supply chain collaboration and service innovation: A conceptual model". The 2nd International Conference on Industrial Engineering and Operations Management (IEOM 2011), Grand Season Hotel, Kuala Lumpur, Malaysia, January 22-24, 2011, Malaysia, pp.698-703 (2011) CHONG, A.Y.L., CHAN, F.T.S. and OOI, K.B.
188 "Computational Organizational Narrative Simulation: A Case Study of construction industry". Knowledge and Systems Sciences, Xian, China, 16-17th September, 2010 (2010) (CD ROM format) YEUNG, CL#, CHEUNG, CF, WANG, WM and TSUI, ERIC
189 "Design of a logistics costs analyzer to formulate distribution routes for freight forwarders". Proceedings of 8th International Conference on Supply Chain Management and Information Systems (SCMIS2010), Hong Kong, Chin, 6-8 October, 2010, pp.345-350 (2010) POON, T.C.# and CHOY, K.L.
190 "Design of a simulation package to enhance student learning in managing warehouse resources". Proceedings of 8th International Conference on Supply Chain Management and Information Systems (SCMIS2010), Hong Kong, China, 6-8 October, 2010, pp.151-156 (2010) YIU, EDDY Y.S., CHOY, EDMOND L.H. and CHOY, K.L.
191 "Design of an integrative vehicle management system for minimizing the toxic gas emission level". Proceedings of 8th International Conference on Supply Chain Management and Information Systems (SCMIS2010), Hong Kong, Chin, 6-8 October, 2010, pp.670-674 (2010) WONG, W.C., CHOY, K.L. and POON, T.C.#
192 "Dynamic modeling of aerostatic bearing spindle and measurement of surface topographies in ultra-precision raster milling". The 10th International Symposium of Measurement Technology and Intelligent Instruments (ISMTII2011), Kaist, Daejeon, Korea, 29 Jun -2 Jul 2011 (2011) (CD version, paper no. P-40) TO, S., ZHANG, S.J.#, WANG ,H.T.# and WANG, S.J.#
193 "Effective Leadership in Project Action Learning Based Organizational Learning: A Chinese Perspective". International Conference in Exploring Leadership and Learning Theories Asia, Malaysia, May 2011 (2011) CHUAH, K.B., CAO, CHRIS R, CHAU, Y.C., KWONG, K.F. and LAW, K.M.Y
194 "Efficacy of IT/IS deployment in small and medium enterprise in China". Proceedings of 8th International Conference on Supply Chain Management and Information Systems (SCMIS2010), Hong Kong, China, 6-8 October, 2010, pp.176-182 (2010) TAM, SIDNEY K.T., BARNES, TINA A. and CHOY, K.L.
195 "Enhancing the Information Transmission for Pharmaceutical Supply Chain Based on Radio Frequency Identification (RFID) and Internet of Things". Proceedings of the 8th International Conference on Supply Chain Management and Information Systems (SCMIS 2010), Hong Kong, China, 6-8 October, 2010, Hong Kong (2010) (in CD ROM format) TING, S.L.#, KWOK, S.K., TSANG, A.H.C. and LEE, W.B.
196 "Environmental integrated closed loop logistics model: An artificial bee colony approach". The 8th International Conference on Supply Chain Management and Information Systems (SCMIS 2010), The Hong Kong Polytechnic University, Hong Kong, 6-8 October 2010, Hong Kong, pp.681-687 (2010) KUMAR, V.V., CHAN, F.T.S., MISHRA, N. and KUMAR, V
197 "Failure Modes, Mechanisms, and Effects Analysis for LED Backlight Systems used in LCD TVs". In M. Pecht, ed., Proceedings of IEEE - Prognostics & System Health Management Conference 2011 (PHM-2011 Shenzhen), Shenzhen China, 24-25 May 2011 (May 2011) (Digital Object Identifier: 10.1109/PHM.2011.5939544) FAN, J.J.#, YUNG, K.C. and PECHT, M.
198 "Finite element modeling of tool wear in single point diamond turning". 2nd International Conference on Nanomanufacturing, 1st CIRP Conference on Nanomanufacturing, Tianjin, China, 24-26 Sep 2010 (2010) (CD version, paper no.309) WANG, H.# and TO, S.
199 "Flow stress experimental determination for warm-forming process". ASME 2011 International Manufacturing Science and Engineering Conference - MSEC 2011, Corvallis, USA, 13-17 Jun 2011 (2011) (CD-ROM) KONG, TF, CHAN, LC and LEE, TC
200 "Framework to measure the performance of warehouse operations efficiency". 8th IEEE International Conference on Industrial Informatics (INDIN), Osaka, Japan, July 13-16, 2010, pp.634-639 (2010) LAM, C.H.Y.#, CHOY, K.L. and CHUNG, S.H.
201 "Impact of service-oriented architecture on service supply chains". The 8th International Conference on Supply Chain Management and Information Systems (SCMIS 2010), The Hong Kong Polytechnic University, Hong Kong, 6-8 October 2010, Hong Kong, pp.197-201 (2010) NANTABUROM, K., CHAN, H.K., CHUNG, S.H. and CHAN, F.T.S.
202 "Integration of mold maintenance planning and production scheduling". The 21st International Conference of Flexible Automation and Intelligent Manufacturing (FAIM 2011), Feng Chia University, Taichung, Taiwan, June 26-29, 2011 (2011) (CD ROM format) WONG, C.S.#, CHAN, F.T.S. and CHUNG, S.H.
203 "Knowledge-intensive Collaborations to combat Cyber Crime in the Asia Pacific". In WB Lee, ed., International Conference on Intellectual Capital, Knowledge Management and Organisational Learning (ICICKM), Hong Kong, 11-12th Nov 2010, ACI, pp.323-330 (2010) NG, DANIEL and TSUI, ERIC
204 "LED secondary optics design". 3rd Lighting Symposium of China, Japan and Korea, Seoul, Korea, 27-29 Sep 2010, Korea, pp.39-42 (Sep 2010) JIANG ,J.B., TO, S., LEE, W.B. and CHEUNG, C.F.
205 "Loading Path Design of Tubular Hydroforming Process for Complicated Shaped Mg Alloy Components". ASME 2011 International Manufacturing Science and Engineering Conference - MSEC 2011, Corvallis, USA, 13-17 Jun 2011 (2011) (CD-ROM) CHEN, W, CHAN, LC and LEE, TC
206 "Numerical simulation and replication of bionic microstructure for drag reduction". Proceedings of the 11th euspen International Conference, Vol. 1, Lake Como, Itay, 23-27 May 2011, pp.41-44 (May 2011) WANG, H.T.#, LEE, W.B. and TO, S.
207 "Numerical simulation of the micro-structure of bionic drag reduction surfaces based on shark skin". 2nd International Conference on Nanomanufacturing, 1st CIRP Conference on Nanomanufacturing, Tianjin, China, 24-26 Sep 2010 (2010) (CD version, paper no. 339) WANG, H.T.#, LEE, W.B. and TO, S.
208 "Predicting coding region candidates in the DNA sequence based on visualization without training". Proceedings of 2011 IEEE Symposium on Computational Intelligence in Bioinformatics and Computational Biology (CIBCB), Paris, France, 11 - 15 April, 2011, pp.1-6 (2011) (Conferenece: IEEE Symposium Series on Computational Intelligence (IEEE SSCI 2011)) CHEN, BO# and JI, PING
209 "Providing decision support functionality in warehouse management using the RFID-based fuzzy association rule mining approach". Proceedings of 8th International Conference on Supply Chain Management and Information Systems (SCMIS2010), Hong Kong, China, 6-8 October, 2010, pp.208-214 (2010) HO, G.T.S., CHOY, K.L. and POON, T.C.#
210 "THE TRUST BUILDING PROCESS OF ONLINE CUSTOMERS: AN EMPIRICAL ANALYSIS ON THE RELATIONSHIP BETWEEN TRUST AND THE DESIGN OF E- PAYMENT GATEWAYS". International Conference on Business, Economics and Information Technology (ICBEIT) 2011, Guam, USA, 28 February - 1 March, 2011 (2011) HO, KEVIN K W and SEE-TO, ERIC W K
211 "The Impacts of Information Privacy, Monetary Reward, and Buyers' Protection Excess on Consumers’ Utility Using E-payment Gateways: A Conjoint Analysis". Australasian Conference on Information Systems (ACIS) 2010 Proceedings, Brisbane, Australia, 1-3 December, 2010 (2010) (link) (Paper 36) HO, KEVIN K W, SEE-TO, ERIC W K and XU, XIN
212 "The Optimization of Routing in Fourth-party Logistics with Soft Time Windows Using Harmony Search". Proceedings of the Sixth International Conference on Natural Computation, Yantai, China, 10-12 Aug (2010) (CD ROM format) HUANG, M., BO, G., WANG, X.W. and IP, W.H.
213 "The influence of ultra-precision machined patterns on self-cleaning properties". 2nd International Conference on Nanomanufacturing, 1st CIRP Conference on Nanomanufacturing, Tianjin, China, 24-26 Sep 2010 (2010) (CD version, paper no. 231 ) CHENG, C.T.#, TO, S., CHAN, C.Y., CHEUNG C.F. and LEE, W.B.
214 "The interaction of PKM with communities and enterprises". Personal Knowledge Management Workshop, Duisburg, Germany, 12th September 2010, pp.89-93 (2010) YIP, JESSICA# and TSUI, ERIC
215 "Warranty failure analysis in service supply chain: A multi-agent framework". The 8th International Conference on Supply Chain Management and Information Systems (SCMIS 2010), The Hong Kong Polytechnic University, Hong Kong, 6-8 October 2010, Hong Kong, pp.262-267 (2010) KUMAR, V., MISHRA, N., KUMAR, V.V., CHAN, F.T.S. and GNANASEKAR, B.
216 "Web Engineering in Project Action Learning". International Conference in Exploring Leadership and Learning Theories Asia, Malaysia, May 2011 (2011) KWONG, K.F, CHUAH, K.B., CHAU, Y.C. and LAW, K.M.Y

 

Other conference paper

Academic research: refereed

Serial No. Title/Brief Description Author(s)

217

 "Selective Laser Melting of Magnesium for future applications in Medicine". 2010 International Conference on Manufacturing Automation, Hong Kong, 13-15 December 2010, pp.50-54 (2010) SAVALANI, MM, NG, CC# and MAN, HC
218 "Selective laser melting of aluminium and its alloys". NZ Rapid Product Development Conference 2011, Auckland, New Zealand, 7-8 February 2011 (2011) SAVALANI, MM, NG, CC#, POON, C# and YEUNG, W#

 

Consulting or contract research report

Contract Research 

Serial No. Title/Brief Description Author(s)

219

 "Design and prototype manufacturing of optical lenses for X1231 projector". 7pp (2011) (Design report for Mattel Asia Pacific Sourcing Ltd., Ptec ref. no. P10-0529) TO, S and JIANG, JB
220 "Design of optical lenses for W2005 projector". 10pp (2010) (Design report for Mattel Asia Pacific Sourcing Ltd., Ptec ref. no. P10-0378) TO, S and JIANG, JB
221 "Development of an optical lens for LED bulk lighting". 7pp (2011) (Design report for Sharp Win Industrial Ltd., Ptec ref. no. P10-0435) TO, S and JIANG, JB
222 "Expert Report on a lifting accident case ". 18pp (Jun 2011) (Deacons PTech Ref no: P10-0501 (Ref: CWCH:WHMI:ek:CT169131)) CHAN, LC
223 "Optical design for Large angle LED Street Light, IESNA LED Streetlight (Type III)". 14pp (2010) (Design report for Neo-Neon Holdings Ltd., Ptec ref. no. P10-0119) TO, S and JIANG, JB

 

Performance and participation in exhibits

Other Outputs

Serial No. Title/Brief Description Author(s)
224 "Conceptual footwear design poster : Galaxy Goldfish". Footwear design and Art 2011, Resource center MN109, The Hong Kong polytechnic University, 22 Jun - 26 Jul (2011) XU, W.# and LUXIMON, A.
225 "Conceptual footwear design poster : Yr- Strength". Footwear design and Art 2011, Resource center MN109, The Hong Kong polytechnic University, 22 Jun - 26 Jul (2011) LUXIMON,A. and ZOU,J.L.#
226 "Prototype footwear design: Yr- Strength". Footwear design and Art 2011, Resource center MN109, The Hong Kong polytechnic University, 22 Jun - 26 Jul (2011) LUXIMON,A., ZOU,J.L.# and ZHANG,Y.F.

 

Patents granted

Other Outputs

Serial No. Title/Brief Description Author(s)
227 "Vertical Micro-injection Machine". Austria Patent No.: 503311 (2010) YUNG, KAI-LEUNG
228 "機械式變焦鏡頭裝置". PRC Patent No.: ZL 200810091856.9 (2011) 杜,雪, 張,志輝, 李,榮彬, 蔣,金波 and 王,文奎

 

Journal editor

Other Outputs

Serial No. Title/Brief Description Author(s)
229 Associate Editor. Annual Journal of IIE(HK), Institute of Industrial Engineers (Hong Kong), Hong Kong (2010-11) TSUI, CP
230 Associate Editor. International Journal of Applied Management Science (2010-11) CHAN, FTS
231 Associate Editor. International Journal of Leraning and Intellectual Capital, Inderscience (2010-11) LEE, WB
232 Associate Editor. International Journal of Modelling in Operations Management (2010-11) CHAN, FTS
233 Associate Editor. International Journal of Network and Mobile Technologies (2010-11) CHAN, FTS
234 Editor. Annual Journal of IIE(HK), Institute of Industrial Engineers (Hong Kong), Hong Kong (2010-2011) TANG, CY
235 Editor. HKIE Transactions (2010-2011) CHAN, KC
236 Editor. Industrial Engineering Research: An International Journal of IE Theory and Application,, Institute of Industrial Engineers (Hong Kong), Hong Kong (2010-2011) TANG, CY
237 Editor. International Journal of Engineering Business Management, IN-TECH Education and Publishing (2010-11) IP, W.H.
238 Editor. International Journal of Knowledge and Systems Science, IGI Global (2010-11) (Chief Editor) LEE, WB
239 Editor. Journal of Hong Kong Printed Circuit Association, Hong Kong Printed Circuit Association, Hong Kong (July 2010-June 2011) YUNG, K.C.
240 Editor. Journal of Information and Knowledge Management Systems, Emerald (2010-11) (Co-chief Editor) LEE, WB
241 Editor. Special Issue in the VINE Journal of Information and Knowledge Management Systems (Emerald), Vol. 41, No. 1 (2010-11) (Co-Editor) TSUI, E
242 Editor. The Open Management Journal (since 2008) CHAN, FTS

 

Postgraduate research theses
Academic research: not refereed

Serial No. Title/Brief Description Author(s)
243 A Knowledge-based Performance Measurement System for Production Planning and Machine Selection (2010) LAM, CHAU YI ANNIE#
244 A Real Time Intelligent Resource Management System for Facilitating Inbound Operations in Manufacturing (2011) POON, TAK CHUN#
245 A Supply Chain Collaborative Model: Integrating the Design, Operation and Measurement Stages of Supply Chain (2011) LAM, CHI YUNG#
246 An Investigation of Factors Affecting Surface Generation in Ultra-precision Machining with Fast Tool Servo (2011) KWOK, TSZ CHUN#
247 Enhancement of Product Quality and Productivity of a Small Household Electrical Appliance Company Using Microcellular Injection Molding Technology (2010) CHUNG, PANG YUI#
248 Formability of Tailor-welded Blanks for Rate-dependent Materials (2010) CHENG, CHI HO#
249 Mapping Team Mental Models with Narrative Simulations (2010) ZOU, XIAOPING#
250 Modeling of Ultra-precision Raster Milling and Characterization of Optical Freeform Surfaces (2010) KONG, LINGBAO#
251 Modelling and Simulation of Residual Stresses and Birefringence in the Precision Injection Moulding of Microlens Arrays (2010) WENG, CAN#

We use Cookies to give you a better experience on our website. By continuing to browse the site without changing your privacy settings, you are consenting to our use of Cookies. For more information, please see our Privacy Policy Statement.

Your browser is not the latest version. If you continue to browse our website, Some pages may not function properly.

You are recommended to upgrade to a newer version or switch to a different browser. A list of the web browsers that we support can be found here