Faculty of Engineering

Current Students Prospective Students
Start main content
  1. Home
  2. Research
  3. Research Strength and Performance
  4. Outputs and Publications
  5. Research Outputs (2015 - 2016)

Research Outputs (2015 - 2016)

SKL_2050x500

Chapter in an edited book (author)
Academic research: refereed

Serial No. Title/Brief Description Author(s)
1 "Intelligent quality function deployment". In Kahraman, C. and Ugurlu S., Eds., Intelligent Decision Making in Quality Management, Springer SBM, Switzerland, pp.327-362 (2016) ISBN 978-3-319-24497-6 (print), 978-3-319-24499-0 (electronic) JIANG, Huimin, KWONG, C.K. and LUO, X.
2 "Lessons Learnt from nearly two hundred cases of Knowledge Management journneys from Hong Kong and Asian enterprises". In Jay Liebowitz, Ed., Successes and Failures of Knowledge Management, Elsevier, Cambridge, pp.175-187 (2016) ISBN 9780128051870 (print), 9780128053379 (electronic) TSUI, ERIC
3 "Wireless Communications, Networking and Applications". In Qing-An, Zeng, Ed.,Design of a Radio Frequency Identification (RFID)-Based Monitoring and Vehicle Management System, Vol. 348, Springer India, New Delhi, pp.537-551 (Oct 2015) ISBN 978-81-322-2579-9 (print), 978-81-322-2580-5 (electronic) WANG, Lixing, IP, W.H. and TING, Siu Lun#

 

Textbook (author)
Academic research: not refereed

Serial No. Title/Brief Description Author(s)

4

 物聯網基礎：應用與個案.1st Ed, 長高科技股份有限公司, 台中市, 153pp (2016) ISBN 978-986-925-960-6 (print) IP, W.H., TSENG, Kuo-Kun, LI, J.Q. and WU, C.H.

 

Publication in refereed journal
Academic research: refereed

Serial No. Title/Brief Description Author(s)

5

 "A Bluetooth-based indoor positioning system: a simple and rapid approach". Annual Journal of IIE (HK), Vol. 35, pp.11-26 (2015) ISSN 1609-3208 (print) TSANG, Yung Po#, WU, C.H., IP, W.H., HO, G.T.S. and TSE, Mike
6 "A Framework of Data Fusion Algorithm for Precision Measurement of Multiscale Surfaces". Key Engineering Materials, Vol. 679, pp.155-161 (Feb 2016) ISSN 1662-9795 (electronic) (link) LIU, Mingyu#, CHEUNG, C.F., REN, Mingjun, CHENG, CHING-HSIANG, KONG, Lingbao and LEE, W.B.
7 "A Study of Fiducial Aided Precision Positioning of Ultra-Precision Freeform Surfaces". Key Engineering Materials, Vol. 679, pp.167-171 (Feb 2016) ISSN 1662-9795 (electronic) (link) REN, Mingjun, CHEUNG, C.F. and KONG, Lingbao
8 "A Study of Tool Path Generation for Machining of Precision Roller with Wavy Patterned Microstructures by Slow Tool Servo". Key Engineering Materials, Vol. 679, pp.191-197 (Feb 2016) ISSN 1662-9795 (electronic) (link) KONG, Lingbao, CHEUNG, C.F., LEE, W.B., TO, S., WANG, SuJuan and LIU, Mingyu#
9 "A Workflow Decision Support System for Achieving Customer Satisfaction in Warehouses Serving Machinery Industry". IFAC-PapersOnLine, Vol. 48, No. 3, pp.1714-1719 (Jul 2015) ISSN 24058963 (print) (link) CHENG, Stephen, W.Y.#, CHOY, K.L. and LAM, H.Y.
10 "A biologically inspired network design model". Scientific Reports, pp.1-14 (2015) ISSN 2045-2322 (print) ZHANG, x., ADAMATZKY, a., CHAN, FTS, DENG, y., YANG, h., YANG, x.s., TSOMPANAS, m.a.i., SIRAKOULIS, g.c. and MAHADEVAN, s.
11 "A cloud-based responsive replenishment system in a franchise business model using a fuzzy logic approach". Expert Systems, Vol. 33, No. 1, pp.14-29 (Jul 2015) ISSN 02664720 (print) (link) LEE, C.K.H.#, CHOY, K.L., HO, G.T.S. and LIN, Canhong#
12 "A fast approach for the integrated berth allocation and quay crane assignment problem". Proceedings of TheIMechEPart B: J. of Engineering Manufacture, pp.2076-2087 (Nov 2015) ISSN 0954-4054 (print) MA, Hoi Lam#, CHAN, FTS and CHUNG, SH
13 "A further study of wheel normal grinding of hemisphere couples on TiCbased cermet". The International Journal of Advanced Manufacturing Technology, pp.1-10 (Mar 2016) ISSN 0268-3768 (print), 1433-3015 (electronic) (Published online 31 Mar 2016) ZHANG, Quanli#, ZHAO, Qingliang, TO, S. and GUO, Bing
14 "A knowledge-based logistics operations planning system for mitigating risk in warehouse order fulfillment". International Journal of Production Economics, Vol. 170, pp.763-779 (Dec 2015) ISSN 09255273 (print) (link) LAM, Hoi Yan, CHOY, K.L., HO, G.T.S., CHENG, Stephen. W. Y. # and LEE, CKM
15 "A new representation with probability distribution for nanometric surface roughness in ultra-precision machining". Precision Engineering, Vol. 45, pp.445-449 (Mar 2016) ISSN 0141-6359 (print) (Published online 2 Mar 2016) ZHANG, Shaojian, TO, S., WANG, S.J. and ZHANG, Guoqing
16 "A novel diamond micro-/nano-machining process for the generation of hierarchical micro-/nano-structures". Journal of Micromechanics and Microengineering, Vol. 26, No. 3 (Feb 2016) ISSN 0960-1317 (electronic) (paper no. 035009 (12pp), Published online 4 Feb 2016) ZHU, Zhiwei#, TO, S., EHMANN, K.F., XIAO, Gaobo# and ZHU, W.L.
17 "A novel methodology for simultaneous consideration of remanufactured and new products in product line design". International Journal of Production Economics, Vol. 169, pp.127-140 (Nov 2015) ISSN 09255273 (print) (link) AYDIN, Ridvan#, KWONG, C.K. and JI, P.
18 "A review of fly cutting applied to surface generation in ultra-precision machining". International Journal of Machine Tools and Manufacture, Vol. 103, pp.13-27 (Apr 2016) ISSN 0890-6955 (print) ZHANG, Shaojian, TO, S., ZHU, Zhiwei# and ZHANG, Guoqing
19 "A slippery genetic algorithm-based process mining system for achieving better quality assurance in the garment industry". Expert Systems with Applications, Vol. 46, pp.236-248 (Mar 2016) ISSN 09574174 (print) (link) LEE, Kar Hang Carmen#, CHOY, K.L., HO, G.T.S. and LAM, HoiYan
20 "A study of chip formation in ductile-regime machining of 6H silicon carbide by molecular dynamics". International Journal of Nanomanufacturing, Vol. 11, No. 1-2, pp.64-77 (2015) ISSN 1746-9392 (print) XIAO, Gaobo#, TO, S. and ZHANG, Guoqing
21 "A study of cutting factors affecting the generation of functional hierarchical rib array structure in ultra-precision raster milling". The International Journal of Advanced Manufacturing Technology, pp.1-10 (Dec 2015) ISSN 0268-3768 (print), 1433-3015 (electronic) WANG, Haitao and LEE, W.B.
22 "A study on the impact of design attributes on E-payment service utility". Information & Management, Vol. 53, No. 5, pp.668-681 (2016) ISSN 03787206 (print) (link) SEE-TO, ERIC W.K. and HO, Kevin K.W.
23 "A theoretical and experimental investigation of orthogonal slow tool servo machining of wavy microstructured patterns on precision rollers". Precision Engineering, Vol. 43, pp.315-327 (Jan 2016) ISSN 01416359 (print) (link) KONG, Lingbao, CHEUNG, C.F. and LEE, W.B.
24 "Achieving tailorable magneto-caloric effect in the Gd-Co binary amorphous alloys". AIP Advances, Vol. 6, No. 3, pp.35302 (Mar 2016) ISSN 2158-3226 (electronic) (link) WU, Cheng, DING, D., XIA, Lei and CHAN, KC
25 "Active control of residual tool marks for freeform optics functionalization by novel biaxial servo assisted fly cutting". Applied Optics, Vol. 54, No. 25, pp.7656-7662 (Sep 2015) ISSN 1559-128X (print), 2155-3165 (electronic) ZHU, Zhiwei#, TO, S. and ZHANG, Shaojian
26 "Adaptive tool servo diamond turning for enhancing machining efficiency and surface quality of freeform optics". Optics Express, Vol. 23, No. 16, pp.20234-20248 (Aug 2015) ISSN 1094-4087 (print) ZHU, Zhiwei# and TO, S.
27 "Algorithms for single-machine scheduling problem with deterioration depending on a novel model". Journal of Industrial and Management Optimization, Vol. 12, No. 4, pp.40-40 (May 2016) ISSN 1547-5816 (print) (link) WU, Hua-Ping, HUANG, Min, IP, W.H. and FAN, Qun-Lin
28 "An EPQ model for deteriorating production system and items with rework". Mathematical Problems in Engineering, Vol. 2015, pp.1-10 (2015) ISSN 1024-123X (print) LI, Nan#, CHAN, FTS, CHUNG, SH and TAI, a.h.
29 "An Experimental Investigation of Effect of Process Parameters on Materials Removal Characteristics in Fluid Jet Polishing". Key Engineering Materials, Vol. 679, pp.91-96 (Feb 2016) ISSN 1662-9795 (electronic) (link) CAO, Zhongchen# and CHEUNG, C.F.
30 "An effective motion-blurred image restoration approach for automated optical inspection". HKIE Transactions, Vol. 22, No. 4, pp.252-262 (Oct 2015) ISSN 1023-697X (print), 2326-3733 (electronic) (link) WU, C.H., TSENG, Kuo-kun, NG, ChunKit# and IP, W.H.
31 "An improvement on “Integrated production strategy and reuse scenario: ACoFAQ model and case study of mail server system development". Omega, Vol. 56, pp.50-52 (2015) ISSN 0305-0483 (print) WU, Z., TANG, Jiafu, KWONG, C.K. and MARINELLI, F.
32 "An in-process tool wear evaluation approach for ultra-precision fly cutting". The International Journal of Advanced Manufacturing Technology, pp.1-9 (Dec 2015) ISSN 1433-3015 (electronic) ZHANG, Guoqing and TO, S.
33 "An integrated model for strategic supply chain design: Formulation and ABC-based solution approach". Expert Systems with Applications, Vol. 52, pp.39-49 (Jun 2016) ISSN 09574174 (print) (link) ZHANG, Linda L., LEE, CKM and ZHANG, Shuzhu
34 "An investigation on surface finishing in ultra-precision raster milling of aluminum alloy 6061". Proceeding of the Institution of Mechanical Engineers, Part B- Journal of Engineering Manufacture, Vol. 229, No. 8, pp.1289-1301 (Aug 2015) ISSN 0954-4054 (print) WANG, S.J., TO, S., CHEN, X. and CHEN, X.D.
35 "An online niche-market tour identification system for the travel and tourism industry". Internet Research, Vol. 26, No. 1, pp.167-185 (Feb 2016) ISSN 1066-2243 (print) (link) WU, C.H., HO, G.T.S., LAM, Hoi Yan, IP, W.H., CHOY, K.L. and TSE, Y.K.
36 "Analyze the healthcare service requirement using fuzzy QFD". Computers in Industry, Vol. 74, pp.1-15 (Dec 2015) ISSN 01663615 (print) (link) LEE, CKM, RU, Chloe Tan Ying, YEUNG, ChuiLing#, CHOY, K.L. and IP, W.H.
37 "Bare bones artificial bee colony algorithm with parameter adaptation and fitness-based neighborhood". Information Sciences, Vol. 316, pp.180-200 (Sep 2015) ISSN 0020-0255 (print) GAO, w.f., CHAN, FTS, HUANG, l.l. and LIU, s.y.
38 "Bi-objective optimization of three echelon supply chain involving truck selection and loading using NSGA-II with exact heuristic algorithm". Applied Soft Computing, Vol. 38, pp.978-987 (Jan 2016) ISSN 1568-4946 (print) CHAN, FTS, JHA, a. and TIWARI, m.k.
39 "Biodegradable charged polyester-based vectors (BCPVs) as an efficient non-viral transfection nanoagent for gene knockdown of the BCR–ABL hybrid oncogene in a human chronic myeloid leukemia cell line". Nanoscale, Vol. 8, No. 17, pp.9405-9416 (May 2016) ISSN 2040-3364 (print), 2040-3372 (electronic) (link) YANG, Chengbin, PANWAR, Nishtha, WANG, Yucheng, ZHANG, Butian, LIU, Maixian, TOH, Huiting, YOON, Ho Sup, TJIN, Swee Chuan, CHONG, Peter Han Joo, LAW, Wing Cheung, CHEN, Chih-Kuang and YONG, Ken-Tye
40 "Case study of surface micro-waves in ultra-precision raster fly cutting". Precision Engineering, Vol. 46, pp.393-398 (Jun 2016) ISSN 0141-6359 (print) (Available online 28 June 2016) ZHANG, Guoqing, TO, S. , ZHANG, Shaojian and ZHU, Zhiwei#
41 "Characteristics of phase changes induced by ultra-precision raster milling at the surface layer of Zn-Al alloy". Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture (Jun 2016) ISSN 2041-2975 (electronic) (Published online 23 Jun 2016) ZHANG, Shaojian and TO, S.
42 "Computational fluid dynamics-based analysis of material removal characteristics in fluid jet polishing". Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 230, No. 6, pp.1035-1048 (Jun 2016) ISSN 0954-4054 (print), 2041-2975 (electronic) (link) CAO, Zhongchen#, CHEUNG, C.F. and KONG, Lingbao
43 "Cutting force prediction for ultra-precision diamond turning by considering the effect of tool edge radius". International Journal of Machine Tools and Manufacture, Vol. 109, pp.1-7 (Jun 2016) ISSN 0890-6955 (electronic) (link) HUANG, Peng and LEE, W.B.
44 "Cytotoxicity assessment of functionalized CdSe,CdTe and InP quantum dots in two human cancer cell models". Materials Science and Engineering: C, Vol. 57, pp.222-231 (Dec 2015) ISSN 09284931 (print) (link) LIU, ing, HU, Rui, LIU, Jianwei, ZHANG, Butian, WANG, Yucheng, LIU, Xin, LAW, Wing Cheung, LIU, Liwei, YE, Ling and YONG, Ken-Tye
45 "Data-driven control based on simultaneous perturbation stochastic approximation with adaptive weighted gradient estimation". IET Control Theory & Applications, Vol. 10, No. 2, pp.201-209 (Jan 2016) ISSN 1751-8644 (print), 1751-8652 (electronic) (link) DONG, Na, WU, C.H., GAO, Zhong-Ke, CHEN, Zeng-qiang and IP, W.H.
46 "Decentralized capacitated planning with minimal-information sharing in a 2-echelon supply chain" . International Journal of Production Research, Vol. 53, No. 16, pp.4927-4950 (Aug 2015) ISSN 0020-7543 (print) OGIER, m., CHAN, FTS, CHUNG, SH, CUNG, v.d. and BOISSIERE, j.
47 "Deformation behaviour of amorphous Fe-Ni-W/Ni bilayer-confined bulk metallic glasses". Materiali in tehnologije, Vol. 50, No. 2, pp.217-222 (Apr 2016) ISSN 15802949 (print), 15803414 (electronic) (link) ((Mar-Apr 2016)) LAU, Ho Kuen#, YIP, Natalie Wing-suet, CHEN, Shunhua, CHEN, Wen# and CHAN, KC
48 "Deformation-induced phase changes of Zn-Al alloy during ultra-precision raster milling". International Journal of Advanced Manufacturing Technology, pp.1-7 (May 2016) ISSN 1433-3015 (electronic) (Published online 23 May 2016) ZHANG, Shaojian and TO, S.
49 "Design of a Collapse-Mode CMUT With an Embossed Membrane for Improving Output Pressure". IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, Vol. 63, No. 6, pp.854-863 (Jun 2016) ISSN 0885-3010 (print), 1525-8955 (electronic) YU, Yuanyu, PUN, Sio Hang, MAK, Peng Un, CHENG, CHING-HSIANG, WANG, Jiujiang, MAK, Pui-In and VAI, MangI
50 "Developing green purchasing relationships for the manufacturing industry: An evolutionary game theory perspective". International Journal of Production Economics, Vol. 166, pp.155-162 (Aug 2015) ISSN 09255273 (print) (link) JI, P., MA, Xin# and LI, Gang
51 "Development of high thermal conductivity via BNNTs/epoxy/organic-Si hybrid composite systems". Journal of Materials Science: Materials in Electronics, Vol. 27, No. 5, pp.5217-5224 (May 2016) ISSN 0957-4522 (print), 1573-482X (electronic) (link) YUNG, K.C., XU, T. and CHOY, H. S.
52 "Developments in laser-based surface engineering processes: with particular reference to protection against cavitation erosion". Surface and Coatings Technology, Vol. 291, pp.189-204 (Apr 2016) ISSN 02578972 (print) (link) KWOK, C.T., MAN, H.C., CHENG, FT and  LO, K.H.
53 "Diamond tool wear in ultra-precision machining". The International Journal of Advanced Manufacturing Technology, pp.1-29 (Apr 2016) ISSN 0268-3768 (print), 1433-3015 (electronic) (Published online 27 April 2016) ZHANG, Shaojian, TO, S. and ZHANG, Guoqing
54 "Differential evolution-based optimal Gabor filter model for fabric inspection". Neurocomputing, No. 173, pp.1386-1410 (2016) ISSN 0925-2312 (print) TONG, Le, WONG, W.K. and KWONG, C.K.
55 "Disparity pattern-based autostereoscopic 3D metrology system for in situ measurement of microstructured surfaces". Optics Letters, Vol. 40, No. 22, pp.5271 (Nov 2015) ISSN 0146-9592 (print), 1539-4794 (electronic) (link) LI, Da#, CHEUNG, C.F., REN, Mingjun, WHITEHOUSE, David and ZHAO, Xing
56 "Due-Window Assignment Scheduling with Variable Job Processing Times". The Scientific World Journal, Vol. 2015, pp.1-7 (2015) ISSN 2356-6140 (print), 1537-744X (electronic) (link) WU, Yu-Bin and JI, P.
57 "Dynamic high potential treatment with dilute acids for lifting the capacitive performance of carbon nanotube/conducting polymer electrodes". Journal of Electroanalytical Chemistry, Vol. 758, pp.125-134 (Dec 2015) ISSN 15726657 (print) (link) YANG, Qin#, PANG, SK and YUNG, K.C.
58 "ECG Sensor Verification System with Mean-Interval Algorithm for Handling Sport Issue". Journal of Sensors, Vol. 2016, pp.1-12 (2016) ISSN 1687-725X (print), 1687-7268 (electronic) (link) TSENG, Kuo-Kun, ZENG, Fufu, IP, W.H. and WU, C.H.
59 "Editorial: Mathematical Problems in Emerging Manufacturing Systems Management". Mathematical Problems in Engineering, Vol. 2015, pp.1-2 (2015) ISSN 1024-123X (print) YANG, t., CHEN, m.c., CHAN, FTS, CHO, c. and KUMAR, v.
60 "Effect of Ta interlayer on laser welding of NiTi to AISI 316L stainless steel". Journal of Materials Processing Technology, Vol. 226, pp.69-77 (Dec 2015) ISSN 09240136 (print) (link) NG, C.H., MOK, Edwin S.H. and MAN, H.C.
61 "Effects of binder addition on the damage mechanism of WC/Co under indentation and high spindle speed grinding (HSSG)". International Journal of Refractory Metals and Hard Materials, Vol. 59, pp.32-39 (May 2016) ISSN 0263-4368 (print) (Available online 12 May 2016) ZHANG, Quanli#, TO, S., ZHAO, Qingliang, GUO, Bing and WU, Mingtao
62 "Effects of electropulsing treatment on material properties and ultra-precision machining of titanium alloy". The International Journal of Advanced Manufacturing Technology, Vol. 82, No. 9, pp.2029-2036 (Feb 2016) ISSN 0268-3768 (print) H.B., Wu and TO, S.
63 "Effects of non-amorphizing hydrogen ion implantation on anisotropy in micro cutting of silicon". Journal of Materials Processing Technology, Vol. 225, pp.439-450 (Nov 2015) ISSN 0924-0136 (print) XIAO, Gaobo#, TO, S. and JELENKOVIC, Emil
64 "Electrochemically reduced graphene oxide/carbon nanotubes composites as binder-free supercapacitor electrodes". Journal of Power Sources, Vol. 311, pp.144-152 (Apr 2016) ISSN 03787753 (print) (link) YANG, Qin#, PANG, SK and YUNG, K.C.
65 "Enhancement of wear and corrosion resistance of beta titanium alloy by laser gas alloying with nitrogen". Applied Surface Science, Vol. 367, pp.80-90 (Mar 2016) ISSN 01694332 (print) (link) CHAN, Chi-Wai, LEE, Seunghwan, SMITH, Graham, SARRI, Gianluca, NG, Chi-Ho, HARBA, Ahmed and MAN, H.C.
66 "Enhancing learning effectiveness by adopting a knowledge-based usability guidelines". Vine : journal of information and knowledge management systems, Vol. 46, No. 1, pp.123-152 (2016) ISSN 2059-5891 (print) CHIN, Sylvia Ping-ping, TSUI, ERIC and LEE, Chien-Sing
67 "Enhancing the Heat Transfer Efficiency in Graphene–Epoxy Nanocomposites Using a Magnesium Oxide–Graphene Hybrid Structure". ACS Applied Materials & Interfaces, Vol. 7, No. 26, pp.14397-14403 (Jul 2015) ISSN 1944-8244 (print), 1944-8252 (electronic) (link) DU, Fei-peng, YANG, Wen, ZHANG, Fang, TANG, C.Y., LIU, Sheng-peng, YIN, Le and LAW, Wing Cheung
68 "Envelope probability and EFAST-based sensitivity analysis method for electronic prognostic uncertainty quantification". Microelectronics Reliability, Vol. 55, No. 9-10, pp.1384-1390 (Aug 2015) ISSN 00262714 (print) (link) SUN, Bo, PAN, Wuyang, WANG, Zili and YUNG, K.C.
69 "Estimation of measurement uncertainty caused by surface gradient for a white light interferometer". Applied Optics, Vol. 54, No. 29, pp.8670 (2015) ISSN 0003-6935 (print), 1539-4522 (electronic) (link) LIU, Mingyu#, CHEUNG, C.F., REN, Mingjun and CHENG, CHING-HSIANG
70 "Eye-friendly reduced graphene oxide circuits with nonlinear optical transparency on flexiblepoly (ethylene terephthalate) substrates". J. Mater. Chem. C, Vol. 3, No. 43, pp.11294-11299 (Nov 2015) ISSN 2050-7526 (print), 2050-7534 (electronic) (link) YUNG, K.C., LI, Guijun, LIEM, H.M., CHOY, Hang Shan and CAI, Zhixiang
71 "Fabrication and process investigation of vancomycin loaded silicaxerogel/polymer core–shell composite nanoparticles for drug delivery". Composites Part B: Engineering, Vol. 95, pp.272-281 (Jun 2016) ISSN 13598368 (print) (link) HUANG, Wenfei#, TSUI, Gary C.P., TANG, C.Y. and YANG, MO
72 "Formation of TiNGrid on NiTi by Laser Gas Nitriding for Improving Wear Resistance in Hanks' Solution". Journal of Materials Science & Technology, Vol. 32, No. 5, pp.459-464 (May 2016) ISSN 10050302 (print) (link) NG, Chi Ho, CHAN, On Ki# and MAN, H.C.
73 "Fuzzy Multiobjective Modeling and Optimization for One-Shot Multiattribute Exchanges With Indivisible Demand". IEEE Transactions on Fuzzy Systems, Vol. 24, No. 3, pp.708-723 (2016) ISSN 1063-6706 (print), 1941-0034 (electronic) (link) JIANG, Zhong-Zhong, FAN, Zhi-Ping, IP, W.H. and CHEN, Xiaohong
74 "High-Throughput Generation of Hierarchical Micro/Nanostructures by Spatial Vibration-Assisted Diamond Cutting". Advanced Materials Interfaces, Vol. 3, No. 4 (Feb 2016) ISSN 2196-7350 (electronic) (Published online Dec 2015, the first version was published on Dec. 2015 without page numbers, and the final version was published on Feb. 2016.) ZHU, Zhiwei#, TO, S., ZHANG, Shaojian and ZHOU, Xiaoqin
75 "How hot is a shear band in a metallic glass?". Materials Science and Engineering: A, Vol. 651, pp.321-331 (Jan 2016) ISSN 09215093 (print) (link) WANG, J.G., PAN, Y., SONG, S.X., SUN, B.A., WANG, G., ZHAI, Q.J., CHAN, KC and WANG, W.H.
76 "Identifying comparative customer requirements from product online reviews for competitor analysis". Engineering Applications of Artificial Intelligence, Vol. 49, pp.61-73 (Mar 2016) ISSN 09521976 (print) (link) JIN, Jian#, JI, P. and GU, Rui
77 "Improvement of glass forming ability and magnetic properties of a Gd55Al20Co25 bulk metallic glass by minor Fe substitution for Co". Modern Physics Letters B, Vol. 29, No. 31, pp.1550198 (Nov 2015) ISSN 0217-9849 (print), 1793-6640 (electronic) (link) GUAN, Q., YU, P., CHAN, KC and XIA, L.
78 "Influence of Minor Addition of Cr on the Magnetocaloric Effect in Fe-Based Metallic Ribbons". MATERIALS TRANSACTIONS, Vol. 57, No. 1, pp.9-14 (Jan 2016) ISSN 1345-9678 (print), 1347-5320 (electronic) (link) GUO, Daoqin#, CHAN, KC and XIA, Lei
79 "Integrated scheduling of a multi-product multi-factory manufacturing system with maritime transport limits". Transportation Research Part E: Logistics and Transportation Review, Vol. 79, pp.110-127 (Jul 2015) ISSN 1366-5545 (print) SUN, Xuting#, CHUNG, SH and CHAN, FTS
80 "Intellectual capital-based innovation planning: empirical studies using wiNKmodel". Journal of Intellectual Capital, Vol. 17, No. 3, pp.553-569 (2016) ISSN 1469-1930 (print) (link) FAN, NG Irene Yuen Han# and LEE, W.B.
81 "Investigating the crystallization behavior of poly(lactic acid) using CdSe/ZnS quantum dots as heterogeneous nucleating agents". Composites Part B: Engineering, Vol. 91, pp.103-110 (Apr 2016) ISSN 13598368 (print) (link) GONG, Xinghou, PAN, Ling, TANG, C.Y., CHEN, Ling, LI, Chunqing, WU, Chonggang, LAW, Wing Cheung, WANG, Xiaotao, TSUI, C.P. and XIE, Xiaolin
82 "Investigation on the position drift of the axis average line of the aerostatic bearing spindle in ultra-precision diamond turning". International Journal of Machine Tools and Manufacture, Vol. 108, pp.44-51 (May 2016) ISSN 0890-6955 (electronic) (link) HUANG, Peng, LEE, W.B. and CHAN, C.Y.
83 "IoT-based Asset Management System for Healthcare-related Industries". International Journal of Engineering Business Management, pp.1 (Nov 2015) ISSN 1847-9790 (electronic) LEE, CKM, CHENG, Mei Na# and NG, Chun Kit#
84 "Large-scale fabrication of micro-lens array by novel end-fly-cutting-servo diamond machining". Optics Express, Vol. 23, No. 16, pp.20593-20604 (Aug 2015) ISSN 1094-4087 (print) ZHU, Zhiwei#, TO, S. and ZHANG, Shaojian
85 "Laser surface forming of AlCoCrCuFeNi particle reinforced AZ91D matrix composites". Optics and laser technology, Vol. 70, pp.119-127 (Jul 2015) ISSN 0030-3992 (print) MENG, Guanghui, YUE, T.M., LIN, Xin, YANG, Haiou, XIE, Hui and DING, Xu
86 "Loading-rate-independent delay of catastrophic avalanches in a bulk metallic glass". Scientific Reports, Vol. 6, pp.21967 (Feb 2016) ISSN 2045-2322 (electronic) (link) CHEN, Shunhua, CHAN, KC, WANG, G., WU, Fufa, XIA, Lei, REN, J. L., LI, J., DAHMEN, K. A. and LIAW, P. K.
87 "Magneto-caloric effect of a Gd50Co50 amorphous alloy near the freezing point of water". AIP Advances, Vol. 5, No. 9, pp.97122 (Sep 2015) ISSN 2158-3226 (electronic) (link) XIA, L., WU, Cheng, CHEN, Shunhua and CHAN, KC
88 "Managing disruption risk in express logistics via proactive planning". Industrial Management & Data Systems, Vol. 115, No. 8, pp.1481-1509 (Sep 2015) ISSN 0263-5577 (print) (link) CHUNG, SH, TSE, Ying Kei and CHOI, T.M.
89 "Managing knowledge in the construction industry through computational generation of semi-fiction narratives". Journal of Knowledge Management, Vol. 20, No. 2, pp.386-414 (Apr 2016) ISSN 1367-3270 (print) (link) YEUNG, Chui Ling#, CHEUNG, C.F., WANG, W.M., TSUI, ERIC and LEE, W.B.
90 "Manipulation of free volumes in a metallic glass through Xe-ion irradiation". ActaMaterialia, Vol. 106, pp.66-77 (Mar 2016) ISSN 13596454 (print) (link) BIAN, X.L., WANG, G., CHEN, H.C., YAN, L., WANG, J.G., WANG, Q., HU, P.F., REN, J.L., CHAN, KC, ZHENG, N., TERESIAK, A., GAO, Y.L., ZHAI, Q.J., ECKERT, J., BEADSWORTH, J., DAHMEN, K.A. and LIAW, P.K
91 "Metallic Glasses". Metals, Vol. 5, No. 4, pp.2397-2400 (Dec 2015) ISSN 2075-4701 (electronic) (link) CHAN, KC and SORT, Jordi
92 "Microstructure and wear resistance of compositionally graded Ti–Si laser-cladcoatin". Materials research innovations, Vol. 19, No. S9, pp.9-13 (Nov 2015) ISSN 1432-8917 (print) YUE, T.M. and ZHANG, H.
93 "Microwave assisted-in situ synthesis of porous titanium/calcium phosphate composites and their in vitro apatite-forming capability". Composites Part B: Engineering, Vol. 83, pp.50-57 (Dec 2015) ISSN 13598368 (print) (link) CHOY, Man Tik Dickson, TANG, C.Y., CHEN, Ling, LAW, Wing Cheung, TSUI, C.P. and LU, William Weijia
94 "Minimization of delay and travel time of yard trucks in container terminals using an improved GA with guidance search". Mathematical Problems in Engineering, Vol. 2015, pp.1-12 (2015) ISSN 1024-123X (print) WANG, Zhengxu#, CHAN, FTS and CHUNG, SH
95 "Modelling and characterization of surface generation in Fluid Jet Polishing". Precision Engineering, Vol. 43, pp.406-417 (Jan 2016) ISSN 01416359 (print) (link) CAO, Zhongchen#, CHEUNG, C.F. and REN, Mingjun
96 "Modifications of surface properties of beta Ti by laser gas diffusionnitriding". Journal of Laser Applications, Vol. 28, No. 2, pp.22505 (Mar 2016) ISSN 1938-1387 (print), 1938-1387 (electronic) (link) NG, Chi-Ho, CHAN, Chi-Wai ,MAN, H.C., WAUGH, David and LAWRENCE, Jonathan
97 "Monitoring life of diamond tool in ultra-precision machining". The International Journal of Advanced Manufacturing Technology, Vol. 82, No. 5-8, pp.1141-1152 (Jul 2015) ISSN 0268-3768 (print), 1433-3015(electronic) CHAN, C.Y., LI, L.H., LEE, W.B. and WONG, Hau Chung
98 "Multi-objective configuration optimization for product-extension service". Journal of Manufacturing Systems, Vol. 37, No. 1, pp.113-125 (Oct 2015) ISSN 0278-6125 (print) SONG, w. and CHAN, FTS
99 "Multi-scale modeling and simulation of material removal characteristics in computer-controlled bonnet polishing". International Journal of Mechanical Sciences, Vol. 106, pp.147-156 (Feb 2016) ISSN 00207403 (print) (link) CAO, Zhongchen# and CHEUNG, C.F.
100 "Near-infrared fluorescent peptide probes for imaging of tumor in vivo and their biotoxicity evaluation: NIR FLORESCENT PEPTIDE PROBES IN TUMOR IMAGING AND IN VIVO TOXICITY EVALUATION". Journal of Biomedical Materials Research Part A, Vol. 104, No. 4, pp.910-916 (Jan 2016) ISSN 15493296 (print) (link) LIU, Liwei, LIN, Guimiao, YIN, Feng, LAW, Wing Cheung and YONG, Ken-Tye
101 "Novel corrective machining method to fine-tune groove widths". The International Journal of Advanced Manufacturing Technology, Vol. 84, No. 9, pp.2729-2737 (Dec 2015) ISSN 0268-3768 (print), 1433-3015 (electronic) (link) CHAN, C.Y., WONG, Nga Yin Polin, LI, L.H., LEE, W.B. and LEUNG, Kwok Dong Patrick
102 "On domain modelling of the service system with its application to enterprise information systems". Enterprise Information Systems, Vol. 10, No. 1, pp.1-16 (2016) ISSN 1751-7575 (print), 1751-7583 (electronic) (link) WANG, J.W., WANG, H.F., DING, J.L., FURUTA, K., KANNO, T., IP, W.H. and ZHANG, W.J.
103 "On the newsvendor model with conditional Value-at-Risk of opportunity loss". International Journal of Production Research, Vol. 54, No. 8, pp.2449-2458 (Apr 2016) ISSN 0020-7543 (print), 1366-588X (electronic) (link) XU, Xinsheng, MENG, Zhiqing, JI, P., DANG, Chuangyin and WANG, Hongwei
104 "Optimal Design of Life Testing for High-Brightness White LEDs Using the Six Sigma DMAIC Approach". IEEE Transactions on Device and Materials Reliability, Vol. 15, No. 4, pp.576-587 (Dec 2015) ISSN 1530-4388 (print), 1558-2574 (electronic) (link) FAN, Jiajie, QIAN, Cheng, YUNG, K.C., FAN, Xuejun, ZHANG, Guoqi and PECHT, Michael
105 "Optimal multi-degree cyclic scheduling of multiple robots without overlapping in roboticflowshopswith parallel machines".Journal of manufacturing systems, Vol. 36, pp.62-75 (Jul 2015) ISSN 0278-6125 (print) LI, X., CHAN, FTS and CHUNG, SH
106 "Optimisationof product family design with consideration of supply risk and discount". Research in Engineering Design, pp.37-54 (2016) ISSN 0934-9839 (print) LUO, X., LI, W., KWONG, C.K. and CAO, Y.
107 "Origin of Shear Stability and Compressive Ductility Enhancement of Metallic Glasses by Metal Coating". Scientific Reports, Vol. 6, pp.27852 (Jun 2016) ISSN 2045-2322 (electronic) (link) SUN, B. A., CHEN, Shunhua, LU, Y. M., ZHU, Z. G., ZHAO, Y. L., YANG, Y., CHAN, KC and LIU, C. T.
108 "Pareto mimic algorithm: An approach to the team orienteering problem". Omega, Vol. 61, pp.155-166 (Jun 2016) ISSN 0305-0483 (print) KE, l, ZHAI, l., LI, J. and CHAN, FTS
109 "Problem Based Learning of Systems Engineering Supported by Additive Manufacturing Processes". Industrial Engineering Research special issue of The International Conference of Technology Education (ICTE) 2015, Vol. 8, No. 1, pp.77-91 (Dec 2015) ISSN 1027-2208 (print) TANG, YM and MO, John
110 "Queue Time Approximations for a Cluster Tool With Job Cascading". IEEE Transactions on Automation Science and Engineering, Vol. 13, No. 2, pp.1200-1206 (Apr 2016) ISSN 1545-5955 (print), 1558-3783 (electronic) (link) WU, Kan, ZHAO, Ning and LEE, CKM
111 "Rapid microwave sintering of carbon nanotube-filled AZ61 magnesium alloy composites". Composites Part B: Engineering, Vol. 93, pp.302-309 (May 2016) ISSN 13598368 (print) (link) AKINWEKOMI, AkeemDamilola#, LAW, Wing Cheung, TANG, C.Y., CHEN, Ling and TSUI, C.P.
112 "Recrystallization of amorphized Si during micro-grinding of RB-SiC/Si composites". Materials Letters, Vol. 172, pp.48-51 (Jun 2016) ISSN 0167-577X (print) ZHANG, Quanli#, TO, S., ZHAO, Qingliang and GUO, Bing
113 "Relationships of tool wear characteristics to cutting mechanics, chip formation, and surface quality in ultra-precision fly cutting". The International Journal of Advanced Manufacturing Technology, Vol. 83, No. 1, pp.133-144 (Mar 2016) ISSN 0268-3768 (print) ZHANG, Guoqing, TO, S. and ZHANG, Shaojian
114 "Rotary spatial vibration-assisted diamond cutting of brittle materials". Precision Engineering, Vol. 44, pp.211-219 (Apr 2016) ISSN 0141-6359 (print) ZHU, Zhiwei#, TO, S., XIAO, Gaobo#, EHMANN, K.F. and ZHANG, Guoqing
115 "Rough Set and PSO-based ANFIS Approaches to Modeling Customer Satisfaction for Affective Product Design". Advanced Engineering Informatics, Vol. 29, No. 3, pp.727-738 (2015) ISSN 1474-0346 (print) JIANG, Huimin, KWONG, C.K., SIU, KIN WAI MICHAEL and LIU, Y.
116 "Sales effort deployment in decentralized dual-channel distribution". Industrial Management & Data Systems, Vol. 116, No. 4, pp.821-837 (May 2016) ISSN 0263-5577 (print) (link) LIU, Chengli#, LEE, CKM and CHOY, K.L.
117 "Saw-tooth-like bulk metallic glass structures with greatly enhanced energy-absorption performance". Journal of Alloys and Compounds, Vol. 661, pp.49-54 (Mar 2016) ISSN 09258388 (print) (link) CHEN, Shunhua, CHAN, KC, WANG, Gang and YI, Jun
118 "Single-Machine Group Scheduling Problems with Variable Job Processing Times". Mathematical Problems in Engineering, Vol. 2015, pp.1-9 (2015) ISSN 1024-123X (print), 1563-5147 (electronic) (link) JI, P. and LI, Lin
119 "Social Media Effects in Virtual Brand Communities:The Case of Facebook and Twitter". International Journal of Systems and Service-Oriented Engineering, Vol. 6, No. 2, pp.66-88 (Apr 2016) ISSN 1947-3052 (print), 1947-3060 (electronic) (link) SEE-TO, ERIC W.K., DELRIO, Pablo Alejandre and HO, Kevin K.W.
120 "Spectral analysis of surface roughness features of a lapped ultraprecision single-point diamond machined surface".The International Journal of Advanced Manufacturing Technology, pp.1-9 (May 2016) ISSN 0268-3768 (print), 1433-3015 (electronic) (link) YU, Ninghui#, CHAN, C.Y., LI, L.H. and LEE, W.B.
121 "Spindle vibration influencing form error in ultra-precision diamond machining".Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science(Apr 2016) ISSN 09544062 (print), 20412983 (electronic) (Published online 11 Apr 2016) ZHANG, Shaojian and TO, S.
122 "Strategic sourcing supplier selection misalignment with critical success factors: Findings from multiple case studies in Germany and the United Kingdom".International Journal of Production Economics, Vol. 166, pp.238-247 (Aug 2015) ISSN 09255273 (print) (link) KOTULA, Martin,HO, William, KUMAR DEY, Prasanta and LEE, CKM
123 "Supplier selection based on evidence theory and analytic network process". Proceedings of The IMechE Part B: J. of Engineering Manufacture, Vol. 230, No. 3, pp.362-573 (Mar 2016) ISSN 0954-4054 (print) ZHANG, x., DENG, y., CHAN, FTS, ADAMATZKY, a. and MAHADEVAN, s,
124 "Surface damage mechanism of WC/Co and RB-SiC/Si composites under high spindle speed grinding (HSSG)". Materials and Design, Vol. 92, pp.378-386 (Feb 2016) ISSN 0264-1275 (print) ZHANG, Quanli#, TO, S., ZHAO, Qingliang and GUO, Bing
125 "Surface generation mechanism of WC/Co and RB-SiC/Si composites under high spindle speed grinding (HSSG)". International Journal of Refractory Metals and Hard Materials, Vol. 56, pp.123-131 (Apr 2016) ISSN 0263-4368 (print) ZHANG, Quanli#, TO, S., ZHAO, Qingliang and GUO, Bing
126 "Synthesis of self-detached nanoporous titanium-based metal oxide". Journal of solid state chemistry, Vol. 229, pp.78-86 (Sep 2015) ISSN 0022-4596 (print) HU, F., WEN, Y., CHAN, K.C., YUE, T.M., ZHOU, Y.Z., ZHU, S.L. and YANG, X.J.
127 "Tensile properties of graphene nano-platelets reinforced polypropylene composites". Composites Part B: Engineering, Vol. 95, pp.166-171 (Jun 2016) ISSN 13598368 (print) (link) LIANG, Ji-Zhao, DU, Qiang, TSUI, Gary Chi-Pong and TANG, Chak-Yin
128 "The non-aqueous synthesis of shape controllable Cu2−xS plasmonicnano structures in a continuous-flow millifluidic chip for the generation of photo-induced heating". Nanoscale, Vol. 8, No. 12, pp.6609-6622 (Mar 2016) ISSN 2040-3364 (print), 2040-3372 (electronic) (link) CHEUNG, Tai Lok#, HONG, Liying, RAO, Nanxi, YANG, Chengbin, WANG, Libo, LAI, Wenn Jing, CHONG, Peter Han Joo, LAW, Wing Cheung and YONG, Ken-Tye
129 "Thermal decomposition kinetics of polypropylene composites filled with graphene nanoplatelets". Polymer Testing, Vol. 48, pp.97-103 (Dec 2015) ISSN 01429418 (print) (link) LIANG, Jizhao, WANG, J.Z., TSUI, Gary C.P. and TANG, C.Y.
130 "Thermal properties and thermal stability of PP/MWCNT composites". Composites Part B: Engineering, Vol. 90, pp.107-114 (2016) ISSN 13598368 (print) (link) ZHOU, T.Y., TSUI, Gary C.P., LIANG, Jizhao, ZOU, S.Y., TANG, C.Y. and MIŠKOVIĆ-STANKOVIĆ, Vesna
131 "Understanding big consumer opinion data for market-driven product design". International Journal of Production Research, Vol. 54, No. 10, pp.3019-3041 (May 2016) ISSN 0020-7543 (print), 1366-588X (electronic) (link) JIN, Jian#, LIU, Ying, JI, P. and LIU, Hongguang#
132 "Unsteady flow structures around a high-drag Ahmed body". Journal of Fluid Mechanics, Vol. 777, pp.291-362 (Aug 2015) ISSN 0022-1120 (print) ZHANG, Bingfu, ZHOU, Y. and TO, S.
133 "Use of nano-droplet-enriched cutting fluid (NDCF) in ultra-precision machining". The International Journal of Advanced Manufacturing Technology, Vol. 84, No. 9-12, pp.2047-2054 (Sep 2015) ISSN 0268-3768 (print), 1433-3015 (electronic) (link) CHAN, C.Y., LI, L.H., LEE, W.B. and WONG, Hau Chung
134 "Virtual spindle based tool servo diamond turning of discontinuously structured micro optics arrays". CIRP Annals - Manufacturing Technology, Vol. 65, No. 1, pp.475-478 (Jan 2016) ISSN 0007-8506 (electronic) (Available online 6 January 2016) TO, S., ZHU, Zhiwei# and WANG, Haitao#
135 "Wetting characteristics of bare micro-patterned cyclic olefin copolymer surfaces fabricated by ultra-precision raster milling". RSC Advances, Vol. 6, No. 2, pp.1562-1570 (Dec 2015) ISSN 2046-2069 (electronic) (Published online 21 Dec 2015) CHENG, Cheung Tong#, ZHANG, Guoqing and TO, S.
136 "What makes consumers unsatisfied with your products: Review analysis at a fine-grained level". Engineering Applications of Artificial Intelligence, Vol. 47, pp.38-48 (Jan 2016) ISSN 09521976 (print) (link) JIN, Jian#, JI, P. and KWONG, C.K.
137 "XPS and TEM study of deposited and Ru-Si solid state reaction grown ruthenium suicides on silicon". Materials Science in Semiconductor Processing, Vol. 40, pp.817-821 (Dec 2015) ISSN 1369-8001 (print) JELENKOVIC, Emil, TO, S.,  BLACKFORD, M.G. and JHA, S.K.
138 "Numerical Simulation for Thermal and RT Forming Light Sheet Materials Using a New Combined Model of M-K Theory and Shear Localization Criterion". The International Journal of Advanced Manufacturing Technology, Vol. 83, No. 1, pp.357-363 (Mar 2016) ISSN 0268-3768 (print), 1433-3015 (electronic) LU, Xianzheng# and CHAN, LC

 

Publication in policy or professional journal
Academic research: refereed

Serial No. Title/Brief Description Author(s)
139 "Fabrication of Perfluoro-Modified SIlica/Epoxy Superhydrophobic Coatings on Glass Substrates". Annual Journal of Institute of Industrial Engineers (Hong Kong) 2014-2015, Vol. 35, pp.39-46 (Sep 2015) ISSN 1609-3208 (print) XIAO, Y.L., TSUI, Gary C.P., WANG, G.C., HUANG, W.F.# and TO, S..
140 "Microwave Processing of Metal Powders: Modelling and Practice". Annual Journal of Institute of Industrial Engineers (Hong Kong) 2014-2015, Vol. 35, pp.27-36 (Sep 2015) ISSN 1609-3208 (print) CHOY, M.T.#, CHEN, L., ZHANG, M.Y., AKINWEKOMI, A.D.# and TANG, C.Y.

 

Invited conference paper
Academic research: not refereed

Serial No. Title/Brief Description Author(s)
141 "Advances in ultra-precision machining of freeform optical elements". International Symposium on Optoelectronic Technology and Application (OTA 2016), Beijing, China, 9-11 May 2016, pp.44 (May 2016) CHEUNG, Benny Chi-Fai
142 "Deformation Simulation of Micro-defects inside a Metallic Alloy". InMaosenCao, Ed., Proceedings of the 2015 International Conference (MME2015), Chengdu, China, 25-27 Dec 2015, World Scientific Publishing Co. Pte. Ltd., pp.747-751 (Dec 2015) ISBN 978-981-3145-59-7 (print) LU, Xianzheng#, YU, K.M., CHAN, LC and SING, WM
143 "Design, Precision Manufacturing and Measurement of Freeform Optics". 2016 Shanghai International Forum on Modern Optical Manufacturing Engineering and Sciences, Shanghai, China, 15-16 March 2016, pp.21 (Mar 2016) CHEUNG, Chi Fai

 

Refereed conference paper
Academic research: refereed

Serial No. Title/Brief Description Author(s)
144 "In vivo study on the biodegradation behaviour of Mg-based alloys for orthopaedic application". In Jan Chłopek, Ed., Proceedings of 27th European Conference on Biomaterils, Kraków, Poland, 30 Aug - 3 Sept 2015, Scientific Publishing House, Poland, pp.61 (Sep 2015) ISBN 978-83-63663-62-9 (print) SAU SHUN, Wong, WING YUK, p, CHAN, LC and LAI, Chi Ping
145 "Manganese-doped Near-infrared Emitting Nanocrystals for in vivo Biomedical Imaging". The 9th International Conference on Nanophotonics, Taipei, Taiwan, 21-25 Mar, 2016, pp.78 (Mar 2016) LAW, Wing Cheung, RAO, Nanxi, CHEUNG, Tai Lok#, YONG, Ken-Tye and LIU, Xin
146 "Novel Plasmonic Sensing Strategy based on Semiconductor Nanocrystals". 4th International Conference and Exhibition on Biosensors & Bioelectronics, Atlanta, USA, 28-30 Sep, 2015, pp.38 (2015) LAW, Wing Cheung, CHEUNG, Tai Lok# and RAO, Nanxi
147 "A Gaussian Process and Image Registration based Stitching Method for White Light Interferometer". Proceedings of 6th International Conference of the Asian Society for Precision Engineering and Nanotechnology (ASPEN2015), Harbin, China, 15-20 August 2015 (Aug 2015) (CD version) LIU, Mingyu#, CHEUNG, C.F. and REN, Mingjun
148 "A Hybrid Fuzzy Case-based System for Handling Air Cargo Storage Location Assignment Operations in Distribution Centers". Proceedings of Portland International Conference for Management of Engineering and Technology PICMET 2015: Management of the Technology Age, Portland, Oregon, USA, August 2 - 6, 2015, pp.1859-1868 (Aug 2015) LEUNG, K.H., CHOY, K.L., TAM, M.C., LAM, C.H.Y., LEE, Kar Hang Carmen# and CHENG, stephen, w.y.
149 "A MEMS Switch with Novel Stopper Structure and Improved Fabrication Processes for Power Applications". 2016 8th Asia-Pacific Conference on Transducers and Micro/Nano Technologies (APCOT 2016), Kanazawa, Japan, 26-29 June 2016 (Jun 2016) (Poster M.55) ZHANG, Meng#, CHONG, Po Fat# and CHENG, CHING-HSIANG
150 "A Method for Fabrication of Core-shell Composite Nanoparticles for Drug Delivery Application". Proceedings of Twenty-Third Annual International Conference on Composites/Nano Engineering, Chengdu, China, July 12-18, 2015, pp.295-296 (Jul 2015) HUANG, Wenfei#, TSUI, C.P., TANG, C.Y., LAW, Wing Cheung and YANG, MO
151 "A Rotational Stitching Method for Measuring Cylindrical Surfaces". Proceedings of the 15th International Conference of the European Society for Precision Engineering and Nanotechnology, Nottingham, United Kingdom, 31 May 2016 - 3 June 2016 (May 2016) (CD version) LIU, Mingyu#, CHEUNG, C.F. and CHEN, Shanshan#
152 "A Stochastic Production-Inventory Model in a Two-State Production System with Deteriorating Product, Rework Process and Backordering". 2015 Global Engineering & Applied Science Conference, Tokyo, Japan, 2-4, December, 2015 (Dec 2015) (CD version) LI, Nan#, CHAN, FTS, CHUNG, SH, TAI, a.h., SAADATZ, m. and WANG, Zhengxu#
153 "A Study of Critical Ranges of Cutting Parameters for the Optimization of Surface Quality in Ultra-precision Raster Milling". Proceedings of the 16th International Manufacturing Conference in China, Hangzhou, China, 22-25 October 2015 (Oct 2015) (CD version) CHEUNG, C.F. and CHENG, MeiNa#
154 "A Study of Factors Affecting Material Removal in Computer-Controlled Bonnet Polishing". Proceedings of the American Society for Precision Engineering’s 30th Annual Meeting (ASPE2015), Austin, Texas, USA, 1-6 November 2015, pp.547-550 (Nov 2015) CHEUNG, C.F., CAO, Zhongchen# and HO, LaiTing
155 "A Study of Factors Affecting Surface Generation in Ultra-precision Grinding of Silicon Carbide". Proceedings of 6th International Conference of the Asian Society for Precision Engineering and Nanotechnology (ASPEN2015), Harbin, China, 15-20 August 2015 (Aug 2015) (CD version) CHEN, Shanshan#, CHEUNG, C.F. and ZHANG, Feihu
156 "A Study of Optimization of Machining Strategy for Enhancing the Efficiency of Process Chain in Ultra-precision Machining". Proceedings of the 15th International Conference of the European Society for Precision Engineering and Nanotechnology, Nottingham, United Kingdom, 31 May 2016 - 3 June 2016 (May 2016) (CD version) ZHAO, Chenyang#, CHEUNG, C.F. and KONG, Lingbao
157 "A Systematic Technology Roadmapping Approach for Testing and Certification Industry: A Case Study". Proceedings of the thirteenth ANQ Congress, Taipei, Taiwan, 23-24 September 2015, pp.1-16 (Sep 2015) WONG, Wai Kiu#, CHEUNG, C.F. and JIN, Q.Y.
158 "A Weighted Least Square Based Data Fusion Method for Measurement of Freeform Surfaces". Proceedings of 6th International Conference of the Asian Society for Precision Engineering and Nanotechnology (ASPEN2015), Harbin, China, 15-20 August 2015 (Aug 2015) (CD version) REN, M.J., CHEUNG, C.F., LIU, Mingyu# and YIN, Y.H.
159 "A genetic algorithm approach for multi-category preventive maintenance scheduling". Global Symposium on Engineering and Applied Science (GSEAS 2016), Bangkok, Thailand, 8-10, March 2016 (Mar 2016) (CD version) CHAN, FTS, WONG, ChunSing# and CHUNG, SH
160 "An Autostereoscopy-based Three-Dimensional Metrology System for Precision Measurement of V-groove Microstructured Surfaces". Proceedings of the 15th International Conference of the European Society for Precision Engineering and Nanotechnology, Nottingham, United Kingdom, 31 May 2016 -3 June 2016 (May 2016) (CD version) CHEUNG, C.F. and LI, Da#
161 "An Improved Artificial Bee Colony Algorithm for the Capacitated Vehicle Routing Problem". 2015 IEEE International Conference on Systems, Man, and Cybernetics, Kowloon Tong, Hong Kong, October 09, 2015-October 12, 2015, IEEE, pp.2124-2128 (Oct 2015) ISBN 978-1-4799-8697-2 (electronic) (link) ZHANG, Shuzhu and LEE, CKM
162 "An Integrated Fuzzy Multi Criteria Approach for Robust Pairing Selection in Aviation Scheduling". The 4th International Conference on Mechanics and Industrial Engineering (ICMIE 2015), Spain, Barcelona, 20-21 July 2015 (Jul 2015) (CD version) CHAN, FTS, SAMVEDI, A. and CHUNG, SH
163 "An Intelligent Fuzzy-based Storage Assignment System for Packaged Food Warehousing". Proceedings of Portland International Conference for Management of Engineering and Technology PICMET 2015: Management of the Technology Age, Portland, Oregon, USA, August 2 - 6, 2015, pp.1869-1878 (Aug 2015) HUI, Y.Y.#, CHOY, K.L., HO, G.T.S., LAM, Cathy H.Y., LEE, Kar Hang Carmen# and CHENG, Stephen, W. Y. #
164 "An Investigation of Machining Technology for the Fabrication of Compound Freeform Surfaces by an Integrated Tool Servo Process". Proceedings of the 16th International Manufacturing Conference in China, Hangzhou, China, 22-25 October 2015 (Oct 2015) (CD version) KONG, Lingbao, XU, M., CHEUNG, C.F. and LEE, W.B.
165 "An Modified EPQ Model with Deteriorating Production System and Deteriorating Product". The 4th International Conference on Mechanics and Industrial Engineering (ICMIE 2015), Spain, Barcelona, 20-21 July 2015 (Jul 2015) (CD version) LI, Nan#, CHAN, FTS, CHUNG, SH and TAI, a.h.
166 "An optimization model for a battery swapping station in Hong Kong". 2015 IEEE Transportation Electrification Conference and Expo (ITEC), No. 3 Dearborn, MI, USA, June 14, 2015-June 17, 2015, IEEE, pp.1-6 (Jul 2015) ISBN 978-1-4673-6741-7 (electronic) (link) TONY HAO WU, PANG, Grantham K. H., CHOY, K.L. and LAM, H.Y.
167 "Anomaly based network intrusion detection: A clonal selection classification approach". The 26th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM), Seoul, Korea, 27-30 June, 2016 (Jun 2016) (CD version) CHAN, FTS, TIBREWAL, R.k. and TIWARI, M.K
168 "Ant colony optimization and simulated annealing for aircraft maintenance routing problem,". The 26th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM), Seoul, Korea, 27-30 June, 2016 (Jun 2016) (CD version) ELSAYED, ELSAYED ELTOUKHY Abdelrahman#, CHAN, FTS and CHUNG, SH
169 "Baby Boomers Retirement in Oil and Gas - Challenges of Knowledge Transfer for Organizational Competitive Advantage". 7th International Conference on Knowledge management and information Sharing (KMIS), Lisbon, Portugal, 12-14th November 2015, pp.168-173 (Nov 2015) SUMBAL, Muhammad SaleemUllah Khan#,TSUI, ERIC and LEE, W.B.
170 "Biocompatibility study of Magnesium-based metal sponge". In Miguel ÁngelRodríguez-Pérez and Eusebio Solórzano, Eds., Proceedings of 9th Internationl Conference on Porous Metals and Metallic Foams, Barcelona, Spain, 31 Aug - 2 Sept 2015, pp.218 (Aug 2015) CHAN, LC, LAI, Chi Ping, CHAU, Lok Hang and WY, Ip
171 "Characterization OF Directional Features for Precision Surfaces Using Curvelet". Proceedings of the American Society for Precision Engineering’s 30th Annual Meeting (ASPE2015), Austin, Texas, USA, 1-6 November 2015, pp.515-520 (Nov 2015) LIU, Mingyu#, CHEUNG, C.F. and REN, Mingjun
172 "Coupled Electromagnetic-Heat Transfer Model For Predicting Temperature Distribution of Ti6Al4V/MWCNTs Powder Compact Under Microwave Irradiation". Proceedings of Twenty-Third Annual International Conference on Composites/Nano Engineering, Chengdu, China, 12-18 July 2015, pp.111-112 (Jul 2015) CHOY, Man Tik Dickson#, TSUI, C.P., LAW, Wing Cheung and TANG, C.Y.
173 "Data Acquisition in 3D Tomography for Multiscale Microstructure Model Construction under Uniaxial Compression". Proceedings of Materials Science & Technology Conference and Exhibition 2015 (MS&T'15), Vol. 1, Columbus, Ohio, USA, 4-8 October 2015, Materials Science and Technology ( MS&T ), pp.561-566 (Oct 2015) ISBN 9781510813939 (print) LU, Xianzheng# and CHAN, LC
174 "Design and development of a performance evaluation system for the aircraft maintenance industry". 2015 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), Singapore, Singapore, December 06, 2015-December 09, 2015, IEEE, pp.564-568 (Dec 2015) ISBN 978-1-4673-8066-9 (electronic) (link) NG, Kam Hung#, TANG, Hoi Man and LEE, CKM
175 "Development of a Fuzzy-Rule Based System for Product Development in the Garment Industry". Proceedings of Portland International Conference for Management of Engineering and Technology PICMET 2015: Management of the Technology Age, Portland, Oregon, USA, August 2 - 6, 2015, pp.1676-1686 (Aug 2015) LEE, C.K.H.#, CHOY, K.L., HO, G.T.S., CHENG, Stephen, W. Y.#, LAM, C.H.Y., LEE, Jason C.H.# and HUANG, yu fan
176 "Development of artificial intelligence embedded aircraft scheduling decision support system for hangar shop in aircraft maintenance company". The 3rd International Conference on Industrial Engineering and Applications (ICIEA 2016), Hong Kong, 28-30 April 2016 (Apr 2016) (CD version) CHAN, FTS
177 "Experimental Study on the Surface Generation of WC/Co and RB-SiC/Si under Micro-grinding". The 16th International Manufacturing Conference in China (IMCC 2015), Hangzhou, China, 22-25 Oct 2015, pp.24 (Oct 2015) ZHANG, Quanli#, TO, S. and ZHAO, Qingliang
178 "Exploring the relevance and correlation between Big Data and Knowledge Management". 4th Hong Kong International Conference on Engineering and Applied Sciences, Hong Kong, 16-18th December 2015, pp.202-209 (Dec 2015) SUMBAL, Muhammad SaleemUllah Khan#, TSUI, ERIC and LEE, W.B.
179 "FABRICATION OF CARBON-BASED CONDUCTIVE POLYMER COMPOSITES FOR DEVELOPMENT OF CLEAN ENERGY". Proceedings of Twenty-Third Annual International Conference on Composites/Nano Engineering, Chengdu, China, 12-18 July 2015, pp.233-234 (Jul 2015) GONG, Chunli, XUE, Zhigang, TSUI, C.P., TANG, C.Y., HUANG, Wenfei# and MIŠKOVIĆ-STANKOVIĆ, Vensa
180 "FABRICATION OF FUNCTIONALIZED SILICA MICROPARTICLES/EPOXY SUPERHYDROPHOBIC COATING ON METAL SUBSTRATES". Proceedings of Twenty-Third Annual International Conference on Composites/Nano Engineering, Chengdu, China, 12-18 July 2015, pp.833-834 (Jul 2015) XIAO, Yelan, TSUI, C.P., WANG, Guocheng, HUANG, Wenfei#, TANG, C.Y. and TO, S.
181 "Form error induced by spindle vibration in ultra-precision machining". The 16th International Manufacturing Conference in China (IMCC2015), Hangzhou, China, 22-25 Oct 2015, pp.21 (Oct 2015) ZHANG, Shaojian and TO, S.
182 "Graphene Oxide Nanofabricated Ultrasonic Transducers (GO-NUTs)". 2015 IEEE International Ultrasonics Symposium (IUS), Taipei, Taiwan, 21-24 October 2015, pp.1336-1339 (Oct 2015) (link) CHENG, Ka Hing, CHENG, CHING-HSIANG and LO, Kwong Chun
183 "Influence of electropulsing treatment on microstructures and surface integrity of Ti-6Al-4V alloys in ultra-precision diamond turning". The 6th International Conference of Asian Society for Precision Engineering and Nanotechnology(ASPEN2015), Harbin, China, 15-19 Aug 2015, pp.39 (Aug 2015) YIP, WaiSze# and TO, S.
184 "Intellectual Capital Risk Assessment: A Perspective from Credit Risk Analysts". In CarloBagnoli, Chiara Mio, Andrea Garlattiand Maurizio Massaro, Eds., Proceedings of the 8th European Conference on Intellectual Capital, Venice, Italy, 12-13 May 2016, Academic Conferences and publishing limited, pp.418-425 (May 2016) TSANG, Wing Chi# and LEE, W.B.
185 "Investigation on the surface characteristics of RB-SiC/Si carbide under micro-grinding". The 6th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN2015), Harbin, China, 15-19 Aug 2015, pp.51 (Aug 2015) ZHANG, Quanli#, TO, S. and ZHAO, Qingliang
186 "Knowledge-based Standard Updates and Changes in a Testing and Certification Company: A Case Study". Proceedings of The 12th International Conference on Intellectual Capital, Knowledge Management & Organisational Learning (ICICKM2015), Bangkok, Thailand, 1-6 November 2015, pp.418-425 (Nov 2015) WONG, W.K. Jane, CHEUNG, C.F., CHAN, O.Y. and CHENG, Mei Na#
187 "MICROWAVE PROCESSING OF HIGH PERFORMANCE METAL MATRIX COMPOSITES". Proceedings of Twenty-Third Annual International Conference on Composites/Nano Engineering, Chengdu, China, 12-18 July 2015, pp.9-10 (Jul 2015) AKINWEKOMI, AkeemDamilola#, CHOY, Man Tik Dickson#, CHEN, Ling, TSUI, C.P., LAW, Wing Cheung and TANG, C.Y.
188 "Measurement and characterization of three-dimensional microstructures on precision roller surfaces". In Liandong, Yu, Ed., SPIE Proceedings, Xia'men, China, Saturday 8 August 2015, SPIE-IntlSoc Optical Eng, pp.990303 (Jan 2016) (link) (The conference held in August 2015 while the proceedings published after the conference in Jan 2016.) KONG, Lingbao, CHEUNG, C.F., LEE, W.B., TO, S. and REN, Mingjun
189 "Mixed Integer Programming Model and Heuristic Algorithm for Production Planning of Continuous Casting and Hot Rolling". The 11th IEEE International Conference on Automation Science and Engineering (CASE2015), Gothenburg, Sweden, 24-28 August 2015 (Aug 2015) (CD version) LYU, m., WANG, z. and CHAN, FTS
190 "Modelling, analysis and projections: a case study on nursing workforce demand in a local nursing home". The World Conference on Business and Management (WCBM 2015), Seoul, Korea, 29 June - 2 July, The People and Global Business Association, pp.306-315 (2015) (link) LEUNG, Po Ling#, WU, C.H., HO, G.T.S., IP, W.H. and MOU, W. L.
191 "Multi-Criteria Decision Making Approach for Aircraft Fleeting and Routing". The 9th International Conference on Operations and Supply Chain and Management (ICOSCM), Ningbo, China, 13-15 July 2015 (Jul 2015) (CD version) CHUNG, SH and CHAN, FTS
192 "Multi-sensor data fusion for measurement of complex freeform surfaces". In Liandong, Yu, Ed., SPIE Proceedings, Xia'men, China, Saturday 8 August 2015, SPIE-Intl Soc Optical Eng, pp.990316 (Jan 2016) (link) (The conference held in August 2015 while the proceedings published after the conference in Jan 2016.) REN, Mingjun, LIU, Mingyu#, CHEUNG, C.F. and YIN, Y. H.
193 "PVA/TiO2 COMPOSITE COATING ON RECLAIMED TIMBER BY RAPID MICROWAVE CURING". Proceedings of Twenty-Third Annual International Conference on Composites/Nano Engineering, Chengdu, China, 12-18 July 2015, pp.77-78 (Jul 2015) CHEN, Ling, CHOY, Man Tik Dickson#, TSUI, C.P., LAW, Wing Cheung, TAM, Wai Man, CHEN, Dazhu and TANG, C.Y.
194 "Process Chain Analysis of Surface Generation in Ultra-precision Machining". Proceedings of 6th International Conference of the Asian Society for Precision Engineering and Nanotechnology (ASPEN2015), Harbin, China, 15-20 August 2015 (Aug 2015) (CD version) CHEUNG, C.F., HO, Lai Ting, KONG, Lingbao and REN, Mingjun
195 "Reduction of Graphene Oxide Film Using Thermal Annealing for Super capacitor Applications". 2016 8th Asia-Pacific Conference on Transducers and Micro/Nano Technologies (APCOT 2016), Kanazawa, Japan, 26-29 June 2016 (Jun 2016) (Poster M.61) CHENG, Ka Hing, LI, Mengjin, CHENG, CHING-HSIANG, CHAO, Andy Kuo-An and LO, Kwong Chun
196 "Research on IoT based Cyber Physical System for Industrial big data Analytics". 2015 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), Singapore, Singapore, December 06, 2015-December 09, 2015, IEEE, pp.1855-1859 (Dec 2015) ISBN 978-1-4673-8066-9 (electronic) (link) LEE, CKM, YEUNG, Chui Ling and CHENG, Mei Na#
197 "Spindle vibration in ultra-precision machining". The 6th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN2015), Harbin, China, 15-19 Aug 2015, pp.79 (Aug 2015) ZHANG, Shaojian and TO, S.
198 "The Competing Newsvendor Game with Overestimated Demand". International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, United State, 4/4/2016, pp.690-694 (Apr 2016) (link) LIU, Chengli# and LEE, CKM
199 "The effect of buy-back policy in air cargo revenue management". 2015 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), Singapore, Singapore, December 06, 2015-December 09, 2015, IEEE, pp.465-469 (Dec 2015) ISBN 978-1-4673-8066-9 (electronic) (link) LIN, Danping, LEE, CKM and YANG, Jilin#
200 "Tool wear presentation in ultra-precision raster fly cutting using work piece modal frequencies". The 16th International Conference of the European Society for Precision Engineering and Nanotechnology (EUSPEN2016), Nottingham, UK, 30 May 2016, pp.367-368 (May 2016) TO, S. and ZHANG, Guoqing
201 "Workforce modelling, analysis and planning: A feasibility study in a local nursing home". 2015 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), Singapore, Singapore, December 06, 2015-December 09, 2015, IEEE, pp.1337-1341 (Dec 2015) ISBN 978-1-4673-8066-9 (electronic) (link) LEUNG, Po Ling#, WU, C.H., HO, G.T.S., IP, W.H. and MOU, W. L.

 

Consulting or contract research report
Contract Research

Serial No. Title/Brief Description Author(s)
202 "Advising on the development of knowledge management practices and systems". (Jul 2015) SEE-TO, ERIC W.K.
203 "Design and development of an optical collimating lens for LED lighting, Quotation no: Pt14-0011 (2)". 10pp (Sep 2015) (Ptec ref no. P15-0124, Company name: ASM Technology SingaporePteLtd.) TO, S. and 王,文奎
204 "Development of optical lenses for google cardboard 3D viewer, Quotation no. : Pt15-0015". 8pp (Jan 2016) (Ptec ref. no. P15-0307, Company name: Mattel Asia Pacific Sourcing Ltd.) TO, S. and 王,文奎
205 "Development of precision optics for an optical projector, Quotation no. : Pt14-0077". 12pp (Apr 2016) (Ptec ref. no. P15-0460, Company name :Mattel Asia Pacific Sourcing Ltd.) TO, S. and 王,文奎
206 "Provision of Proof-of-Concept Study of the Applicatoin of RFID for Fallen Object Detection in Light Rail Vehicle". (Sep 2015) HO, G.T.S. and LEE, CKM

 

Licensing agreements
Other Outputs

Serial No. Title/Brief Description Author(s)
207 "LED Filament Bulb". Ever Star Energy Saving Ltd (May 2016) TO, S. and CHIU, Chung Chi#
208 "Light Field Camera with Micro-lens Array". Marvel Research Ltd (Sep 2015) LEE, W.B., LI, L.H. and CHAN, CY
209 "Network Motor Control Application Specific Integrated Circuit ("ASIC")". Bio-Medical Engineering (HK) Ltd (Feb 2016) YUNG, K.L.

 

Patents granted
Other Outputs

Serial No. Title/Brief Description Author(s)
210 "METHOD FOR OPTIMIZING RFID DEPLOYMENT". Japan - 5771592 (Jul 2015) KWOK, Siu Keung, CHEUNG, CHI FAI, TSANG, Hing Choi, LEE, W.B., TAN, Burly K., NG, Pui Him and HO, Sze Kit
211 "Rapid fabrication of porous metal-based biomaterial by microwave sintering". US - US 9074267 (Jul 2015) TANG, Chak Yin, BAO, SU PING, TSUI, Chi Pong and YUE, Tai Man
212 "Vertical micro-injection machine". Germany - 11 2005 001 718 (Mar 2016) YUNG, K.L.
213 "一种兼容多类型光盘的透镜". PRC - ZL201110251728.8 (Sep 2015) 李,荣彬, 杜,雪, 李,莉华 and 王,文奎
214 "優化射頻識別部署的方法和射頻識別部署優化器". PRC - ZL 201210192947.8 (Mar 2016) 郭,少强, 张,志辉, 曾,庆才, 李,荣彬, 陈,炎材, 吴,沛谦 and 何,思杰
215 "抛光磨头". PRC - ZL201010150477.X (Jul 2015) 张,志辉, 赖,锦棠, 何,丽婷, 杜,雪, 李,荣彬 and 孔,令豹#
216 "激光点焊监测方法及监测装置". PRC - ZL201310099852.6 (Feb 2016) 文,效忠, 卢,光铨, 陈,清远 and 郑,嘉庆

 

Journal editor
Other Outputs

Serial No. Title/Brief Description Author(s)
217 Associate Editor. Austin Journal of Biosensors & Bioelectronics (Jul 2015) LAW, Wing Cheung
218 Associate Editor. International Journal of Modelling in Operations Management. (2015) CHAN, FTS
219 Associate Editor. International Journal of Network and Mobile Technologies (IJNMT) (2015) CHAN, FTS
220 Associate Editor. The Open Economics and Management Journal (2016) CHAN, FTS
221 Associate Editor. Annual Journal of Institute of Industrial Engineers (Hong Kong), 2014-2015, Vol. 35, Institute of Industrial Engineers (Hong Kong) (Sep 2015) (ISSN: 1609-3208) TSUI, C.P.
222 Associate Editor. Electronic Commerce Research, Springer SBM (2015) SEE-TO, ERIC W.K.
223 Associate Editor. International Journal of Asian Business and Information Management (Jul 2015) LEE, W.B.

 

Journal editor
Academic

Serial No. Title/Brief Description Author(s)
224 Associate Editor. International Journal of Engineering Business Management (Aug 2015) LEE, CKM

 

Journal editor
Other Outputs

Serial No. Title/Brief Description Author(s)
225 Associate Editor. International Journal of Engineering Business Management (Jul 2015) HO, G.T.S.
226 Associate Editor. International Journal of Learning and Intellectual Capital (Jul 2015) LEE, W.B.
227 Associate Editor. International Journal of Manufacturing Technology and Management, InderScience Publishers (Jul 2015) YUNG, K.C.
228 Associate Editor. VINE Journal of Information and Knowledge Management (Jul 2015) TSUI, ERIC
229 Associate Editor. World Journal of Engineering (Jul 2015) TSUI, C.P.
230 Editor. Annual Journal of Institute of Industrial Engineers (Hong Kong), 2014-2015, Vol. 35, Institute of Industrial Engineers (Hong Kong) (Sep 2015) (ISSN: 1609-3208) TANG, C.Y.
231 Editor. Austin Journal of Biomedical Engineering (Jul 2015) (Editorial Board Member) TANG, C.Y.
232 Editor. Communications in Information Science and Management Engineering (Jul 2015) (Member of Editorial Board) CHAN, FTS
233 Editor. Composite Part B: Engineering Journal (Jul 2015) (Editorial Board Member) TSUI, C.P.
234 Editor. Enterprise Information Systems (Taylor & Francis, SCI-indexed) (Jul 2015) (Editor-in-Chief) IP, W.H.
235 Editor. Industrial Engineering Research Journal (Jul 2015) (Secretary of Editorial Board) TSUI, C.P.
236 Editor. Industrial Engineering Research: An International Journal of IE Theory and Application (Jul 2015) TANG, C.Y.
237 Editor. Industrial Management & Data Systems (Jul 2015) (Editorial Advisory Board) LEE, CKM
238 Editor. Industrial Management & Data Systems (Jul 2015) (GuestEdtiorof special issue " Cyber Physical Systems in Service Industry: Models, Design and Cases") LEE, CKM
239 Editor. International Journal of Advanced Manufacturing Technology (Jul 2015) (Member of Editorial Advisory Board) CHAN, FTS
240 Editor. International Journal of Agile Systems and Management (Jul 2015) (Member of Editorial Board) CHAN, FTS
241 Editor. International Journal of Applied Management Science (Jul 2015) (Member of Editorial Board) CHAN, FTS
242 Editor. International Journal of Business Innovation and Research (Jul 2015) (Member of the Editorial Board) TSUI, ERIC
243 Editor. International Journal of Business Performance Management (Jul 2015) (Member of Editorial Board) CHAN, FTS
244 Editor. International Journal of Business Science and Applied Management (Jul 2015) (Member of Editorial Board) SEE-TO, ERIC W.K.
245 Editor. International Journal of Communication Technology for Social Networks (IJCTSN) (Jul 2015) (Editorial Board Member) TSUI, ERIC
246 Editor. International Journal of Computer Applications in Technology (Jul 2015) (Member of Editorial Advisory Board) CHAN, FTS
247 Editor. International Journal of Computer Integrated Manufacturing (Jul 2015) (Member of Editorial Board) CHAN, FTS
248 Editor. International Journal of Engineering Business Management (SAGE Publishing, ESCI and SCOPUS Indexed) (Jul 2015) (Founding Editor-in-Chief) IP, W.H.
249 Editor. International Journal of Intelligence Science (IJIS) (Jul 2015) (Member of the Editorial Board) CHEUNG, C.F.
250 Editor. International Journal of Knowledge Based Organizations (IJKBO) (Jul 2015) (Member of the International Editorial Board) CHEUNG, C.F.
251 Editor. International Journal of Knowledge and Systems Science (IJKSS) (Jul 2015) (Editorial Review Board Member) CHEUNG, C.F.
252 Editor. International Journal of Knowledge and Systems Science (Jul 2015) (Advisory Editorial Review Board member) TSUI, ERIC
253 Editor. International Journal of Knowledge and Systems Science (Jul 2015) (Chief Editor) LEE, W.B.
254 Editor. International Journal of Knowledge-Based Development (Jul 2015) (Member of the Editorial Board) TSUI, ERIC
255 Editor. International Journal of Knowledge-based Organization (Jul 2015) (International Editorial Board) TSUI, ERIC
256 Editor. International Journal of Lean Enterprise Research (Jul 2015) (Member of Editorial Board) CHAN, FTS
257 Editor. International Journal of Management, Knowledge and Learning, ISSN 2232-5107, Special Issues (Jul 2015) (Guest Editor) LAW, KRIS M Y
258 Editor. International Journal of Metallurgical & Materials Engineering (Jul 2015) (Editorial Board Member) YUE, T.M.
259 Editor. International Journal of Optics and Photonic Engineering (Jul 2015) (Editorial Board Member) CHEUNG, C.F.
260 Editor. International Journal of Production Research (Jul 2015) (Member of Editorial Board) CHAN, FTS
261 Editor. International Journal of Services, Economics and Management (Jul 2015) (Member of Editorial Board) CHAN, FTS
262 Editor. International Journal of Supply Chain and Operations Resilience (Jul 2015) (Member of Editorial Board) CHAN, FTS
263 Editor. International Journal of Systems and Service-Oriented Engineering (IJSSOE), Vol. 6 (Apr 2016) HO, Kevin and SEE-TO, ERIC W.K.
264 Editor. International Journal of Technology and Design Education (Jul 2015) (Member of Editorial Board) TANG, C.Y.
265 Editor. International Journal of Technology and Management (Jul 2015) (Member of Editorial Board) CHAN, FTS
266 Editor. International Journal of Web Portals (Jul 2015) (International Editorial Review Board member) TSUI, ERIC
267 Editor. International Scholarly Research Notices (ISRN)-Industrial Engineering Journal (Jul 2015) (Editorial Board Member) CHEUNG, C.F.
268 Editor. International Scholarly Research Notices: Materials Science (Jul 2015) (Editorial Board Member) YUE, T.M.
269 Editor. Journal of Biomedical Engineering and Informatics (Jul 2015) (Editorial Board Member) TSUI, C.P.
270 Editor. Journal of Biomedical Engineering and Informatics (Jul 2015) (Editorial Board Member) TANG, C.Y.
271 Editor. Journal of Computer Information Systems (Jul 2015) (Member of Editorial Review Board) CHAN, FTS
272 Editor. Journal of Engineering Manufacture (Jul 2015) (Member of Editorial Board) LEE, W.B.
273 Editor. Journal of Enterprise Information Management (Jul 2015) (Editorial Board Member) CHOY, K.L.
274 Editor. Journal of Information and Knowledge Management Systems (Jul 2015) LEE, W.B.
275 Editor. Journal of Knowledge Management Studies (Jul 2015) (Member of the Editorial Board) TSUI, ERIC
276 Editor. Journal of Knowledge Management (Jul 2015) (Regional Editor) TSUI, ERIC
277 Editor. Journal of Manufacturing Technology Management (Jul 2015) (Member of Editorial Advisory Board) CHAN, FTS
278 Editor. Journal of Materials Science and Technology Research (Avanti Publisher) (Jul 2015) (Member of Editorial Board) CHAN, LC
279 Editor. Journal of Quality in Maintenance Engineering (Jul 2015) (Regional Editor for Asia) TSANG, ALBERT H.C.
280 Editor. Journal of Recent Patents on Engineering (Jul 2015) (Member of Editorial Advisory Board) CHAN, FTS
281 Editor. Journal of the Serbian Society for Computational Mechanics (Jul 2015) (Member of Editorial Board) TANG, C.Y.
282 Editor. Knowledge Management Research and Practice (Jul 2015) (Advisory Editorial Board member) TSUI, ERIC
283 Editor. Knowledge and Performance Management (Jul 2015) (Editorial Board Member) TSUI, ERIC
284 Editor. Knowledge-based Systems (Jul 2015) (Editorial Advisory Board member) TSUI, ERIC
285 Editor. Open Journal of Organic Polymer Materials (Jul 2015) (Editorial Board Member) YUNG, K.C.
286 Editor. Robotics and Computer Integrated Manufacturing (Jul 2015) (Member of Editorial Board) CHAN, FTS
287 Editor. Supply Chain Management: An International Journal (Jul 2015) (Member of Editorial Board) CHAN, FTS
288 Editor. The HKIE Transactions (Jul 2015) (Editor-in-Chief) CHAN, KC
289 Editor. The Journal of Printed Circuit Association (Jul 2015) (Editorial Board Member) YUNG, K.C.
290 Editor. The Open Materials Science Journal (Jul 2015) (Editorial Board Member) CHAN, KC
291 Editor. The Open Mechanical Engineering Journal (Jul 2015) (Editorial Board Member) CHAN, KC
292 Editor. The Scientific World Journal (Hindawi Publishing Corporation) (Jul 2015) (Guest Editor of Special Issue) CHAN, LC
293 Editor. The Scientific World Journal (under Computer Science section) (Jul 2015) CHAN, FTS
294 Editor. West Indian Journal of Engineering (Jul 2015) (Member, International Editorial Advisory Committee) TSANG, ALBERT H.C.
295 Editor. Wireless Engineering and Technology (Jul 2015) (Member of Editorial Board) CHAN, FTS

 

Other Outputs

Serial No. Title/Brief Description Author(s)

296

 "Yung K.C., Liem H.M., Choy, H.S., “Laser direct patterning of reduced-graphene oxide transparent circuit”, Filing No. 14/297,644, US Patent filed July 2014, Granted on 4 Aug, 2015". USA (Aug 2015) (Granted Patent) YUNG, K.C., LIEM, H.M. and CHOY, Hang Sang

 

Postgraduate research theses
Academic research: not refereed

Serial No. Title/Brief Description Author(s)

297

 "An Integrated Marketing and Engineering Approach to Product Line Design with Consideration of Remanufactured Products". (May 2016) AYDIN, Ridvan#
298 "An Investigation of Modelling and Measurement of Surface Generation in Single-Point Diamond Turning of Microstructure Pattern Rollers". (Jun 2016) MAK, Chung Hong#
299 "Computational Organizational Narrative Generation for Decision Support Learning". (Nov 2015) YEUNG, Chui Ling#
300 "Design of a New Rotomolding Process for Making Seamless Hollow Plastic Parts". (Apr 2016) NG,Wai On#
301 "Development of Production and Inventory Control Policies in Imperfect Production Systems". (Jun 2016) LI, Nan#
302 "Development of an Intelligent System for Quality Assurance in the Garment Industry". (Jul 2015) LEE, Kar Hang Carmen#
303 "Diamond Milling Servo Based Mechanical Machining System for Micro/Nanomanufacturing". (Feb 2016) ZHU, Zhiwei#
304 "Integrated Planning of Berth Allocation and Quay Crane Assignment Problems". (Sep 2015) MA, Hoi Lam#
305 "Intelligent Extraction of Intellectual Capital for Value Creation in Knowledge-intensive Organizations". (Jun 2016) CAI, Linlin#
306 "Maximizing Container Terminal Throughput by Internal Tractors Assignment and Scheduling". (Nov 2015) WANG, Zhengxu#
307 "Modelling and Analysis of Material Removal Characteristics in Computer Controlled Ultra-precision Polishing". (Jun 2016) CAO, Zhongchen#
308 "Modelling, Fabrication and Testing of Compound Ribs for the Enhancement of Heat Transfer in Micro-heat Exchangers". (Jun 2016) WANG, Haitao#
309 "Molecular Dynamics Modelling and Mechanics Analysis on the Mechanism of Brittle to Ductile Cutting Mode Transition in Ultra-precision Machining". (Nov 2015) XIAO, Gaobo#
310 "Workplace Context and Its Effect on Individual Competencies and Performance in Work and Project Teams". (Sep 2015) ROZHKOV, Mikhail#

 

Total number of outputs (costcentre20):

310

Total weighting of outputs (costcentre20):

251.1753

We use Cookies to give you a better experience on our website. By continuing to browse the site without changing your privacy settings, you are consenting to our use of Cookies. For more information, please see our Privacy Policy Statement.

Your browser is not the latest version. If you continue to browse our website, Some pages may not function properly.

You are recommended to upgrade to a newer version or switch to a different browser. A list of the web browsers that we support can be found here