Research and Facilities

Conference Proceedings

Sort
1.

LIU, S.Y., CHAN, T.L., ZHOU, K., “A New Stochastically Weighted Operator Splitting Monte Carlo Method for Particle-fluid Systems”, ASME-ATI-UIT 2015 Conference on Thermal Energy Systems: Production, Storage, Utilization and the Environment (In Session: Computational Thermal-fluid Dynamics), Naples, Italy, 17-20 May (2015).

2.

ZHOU, K. and CHAN, T.L., “Numerical Investigation of the Lewis Number Effect on Nucleation in Turbulent Flows”, Ninth Asian Aerosol Conference (AAC2015) (In Session: Aerosol Physics), Kanazawa, Japan, 24-27 June (2015).

3.

CHENG, L., “Vibroacoustic Modelling, Analyses and Optimization”, 2015 Conference of Jiangsu Society of Mechanics, Nanjing, China, 06-08 November (2015).

4.

CHENG, L., “A Pseudo-Excitation Approach for Structural Damage Detection”, 2015 International Vibro-Engineering Conference, Nanjing, China, 26-28 September (2015).

5.

CHENG, L., “Micro-perforates for Acoustic Noise Control Applications”, 23rd International Conference on Noise and Fluctuations, Xian, China, 02-05 June (2015).

6.

CHENG, L., “A Sub-Structuring Technique Based on Patch Transfer Function with Compound Interface Treatment for Vibro-acoustic System Modelling and Optimization”, 12th International Conference on Vibration Problems (ICOVP-2015), Guwahati, India, 14-17 December (2015).

7.

YU, X. and CHENG, L., “Ventilated Silencing Devices and Its Modeling Using a Sub-structuring Approach”, 44rd International Congress on Noise Control Engineering (Inter-Noise 2015), San Francisco, USA, 09-12 August (2015).

8.

ZHANG, C., CHENG, L. and QIU, J.H., “Metal-Core Piezoelectric Fiber Based Smart Layer for Damage Detection Using Sparse Virtual Element Boundary Measurement”, CANSMART 2015: International Conference on Smart Materials and Structures, Vancouver, Canada, 15-17 July (2015).

9.

ZHANG, C., CHENG, L. and QIU, J.H., “Damage Detection Based on Virtual Element Boundary Measurement with Enhanced Noise Immunity under Weak Formulation”, 23rd International Conference on Noise and Fluctuations, Xian, China, 02-05 June (2015).

10.

ZIAJA, A., CHENG, L., RADECKI, R., PACKO, P. and STASZEWSKI, W.J., “Cylindrical Guided Wave Approach for Damage Detection in Hollow Train Axles”, 10th International Workshop on Structural Health Monitoring, Stanford University, 01-03 September (2015).

11.

HUANG, W., JI, H.L., CHENG, L. and QIU, J.H., “Broadband Energy Focalization in Plates with a Tailored Power-law-profiled Indentation with Lens-like Function”, The 16th Asian Pacific Vibration Conference, Hanoi, Vietnam, 24-26 November (2015).

12.

YU, X., CUI, F.S. and CHENG, L., “Sound Transmission Control for Ventilation Window Using Micro-Perforated Panel Absorber”, 12th Western Pacific Acoustics Conference, Singapore, 06-09 December (2015).

13.

YU, X., TONG, Y.H., CHENG, L. and PAN, J., “Muffler Design by Sub-chamber Optimization with Application to a Mining Track Muffler”, 2015 Noise and Vibration - Emerging Technologies (NOVEM2015), Dubrovnik, Croatia, 13-15 April (2015).

14.

YU, X., YANG, C. and CHENG, L., “Design and Analysis of Broadband Acoustic Silencers”, 23rd International Conference on Noise and Fluctuations, Xian, China, 02-05 June (2015).

15.

TANG, L.L., ZHANG, S., JI, H.L. and CHENG, L., “A Wavelet-decomposed Semi-Analytical Model for Flexural Vibration of a Beam with Acoustic Black Hole Effect”, The 16th Asian Pacific Vibration Conference, Hanoi, Vietnam, 24-26 November (2015).

16.

TANG, L.L., ZHANG, S., JI, H.L., CHENG, L. and QIU, J.H., “Characterization of Acoustic Black Hole Effect Using a 1-D fully-coupled and Wavelet-decomposed Semi-analytical Model”, 44rd International Congress on Noise Control Engineering (Inter-Noise 2015), San Francisco, USA, 09-12 August (2015).

17.

GUAN, C., CHEUNG, C.S., NING, Z., WONG, P.K. and HUANG, Z., “Investigation on Combustion Performance and Emissions Characteristics of a LPG-Diesel Engine”, International Conference on Environment 2015 (ICENV 2015), Penang, Malaysia, 18-19 August (2015).

18.

WEI, L., CHEUNG, C.S. and NING, Z., “Influence of Waste Cooking Oil Biodiesel on the Unregulated Emissions of a Diesel Engine”, International Conference on Environment 2015 (ICENV 2015), Penang, Malaysia, 18-19 August, Paper No. UA183 (2015).

19.

WANG, T.G. and CHOY, Y.S., “An Approach for Sound Sources Localization Characterization Using Array of Microphones”, 23rd International Conference on Noise and Fluctuations, Xi'an, China, 2-5 June (2015).

20.

 

CHIANG, Y.K., CHOY, Y.S. and TANG, S.K., “Noise Control of Doublet by Membrane Housing Device in Flow Duct System”, Proc. 22nd International Congress on Sound and Vibration, Florence, Italy, 12-16 July (2015).

21.

WANG, Z.B., CHOY, Y.S. and XI, Q., “Fan Noise Control by a Flexible Casing Structure”, the 3rd Symposium on Fluid-Structure-Sound Interaction and Control, Perth, Australia, 5-9 July (2015).

22.

HUAN, Z., CHU, H.K., YANG, J. and SUN, D., “3D Cell Manipulation with Honeycomb-patterned Scaffold for Regeneration of Bone-like Tissues”, Proceedings of the 2015 IEEE International Conference on Information and Automation, Lijiang, China, 08-10 August, pp.1680-1685 (2015).

23.

NIU, F., MA, W., CHU, H.K., JI, H., YANG, J. and SUN, D., “An Electromagnetic System for Magnetic Microbead’s Manipulation”, Proceedings of the 2015 IEEE International Conference on Mechatronics and Automation, Beijing, China, 02-05 August, pp.1005-1010 (2015).

24.

WANG, Y. and JING, X.J., “Design of a Novel Quasi-Zero-Stiffness Based Sensor System for Measurement of Absolute Vibration Motion”, The 10th Asian Control Conference 2015 (ASCC 2015), Kota Kinabal, Sabah, Malaysia, 30 May - 04 June (2015).

25.

WU, Z.J. and JING, X.J., “A Bio-Inspired Structure for Vibration Isolation”, The 5th Annual IEEE Int. Conf. on CYBER Technology in Automation, Control, and Intelligent Systems, Shenyang, China, 08 - 12 June (2015).

26.

FU, J., LEUNG, C.W., HUANG, Z.H., CHEUNG, C.S. and ZHANG, Y., “Systematic Investigation of Premixed Methane Impinging Flames”, Proceedings of the European Combustion Meeting, Budapest, April (2015).

27.

LIU, Y., YAN, W.W. and FU, B.M., “LBM Simulation of Cell Adhesion in Microcirculation”, The 12th International Conference for Mesoscopic Methods in Engineering and Science (ICMMES 2015), Beijing, China, 20-24 July (2015).

28.

LIU, Y., YAN, W.W. and FU, B.M., “Cell Adhesion in Microcirculation”, Proceeding of the 18th International Conference on Finite Elements in Flow Problems, Taipei, Taiwan, 16-18 March (2015).

29.

SHAO, J.C., LIU, Y. and SU, Z.D., “Effect of Vasomotion on Blood Flow Distribution in Microvessels”, The 3rd Symposium on Fluid-Structure-Sound Interactions and Control, Perth, Australia, 05-09 July (2015).

30.

XIAO, L.L., LIU, Y., CHEN, S. and FU, B.M., “Numerical Simulation of a Single Cell Flowing through a Narrow Slit”, The 19th Annual Conference of HKSTAM, Hong Kong, 28 March (2015).

31.

YANG, H., ZHOU, Y., ZHU, Y. and LIU, Y., “Flapping Motion of a Turbulent Jet under the Asymmetric Excitation of Two Unsteady Minijets”, The 3rd Symposium on Fluid-Structure-Sound Interactions and Control, Perth, Australia, 05-09 July (2015).

32.

SHI, S.Q., “Quantitative, Elastoplastic Phase-field Model for Microstructural Evolution under Stress and Temperature Gradients”, 13th US National Congress on Computational Mechanics, San Diego, USA, 26-30 July (2015).

33.

SHI, S.Q., XIAO, Z.H. and TANG, G.Y., 13th US National Congress on Computational Mechanics, “Phase-Field Modeling of Electrochemical Corrosion of Metals”, San Diego, USA, 26-30 July (2015).

34.

SHI, S.Q., “Quantitative, Elastoplastic Phase-field Model for Microstructural Evolution in Solids under Stress and Temperature Gradients”, 6th International Conference on Computational Methods (ICCM2015), Auckland, New Zealand, 14-17 July (2015). 

35.

SHI, S.Q., “Quantitative, Elastoplastic Phase-field Model for Microstructural Evolution under Stress and Temperature Gradients”, 8th International Conference on Materials for Advanced Technologies of the Materials Research Society of Singapore (ICMAT2015), Singapore, 28 June - 03 July (2015).

36.

SHI, S.Q., “Quantitative Phase-field Model of Microstructure Evolution for Binary Alloys”, 5th East Asia Mechanical and Aerospace Engineering Workshop, Seoul, Korea, 28-30 May (2015).

37.

SHI, S.Q. and XIAO, Z.H., “Quantitative, Elastoplastic Phase Field Model for Hydride Precipitation in Zirconium under Stress and Temperature Gradients”, Coupled Problems 2015, Venice, Italy, 18-20 May (2015).

38.

LIU, M., SU, Z., ZHANG, Q. and LONG, R., “Modeling on Propagation of Shock Waves Induced by Hypervelocity Impact (HVI) with Application to Evaluation of HVI Damage”, the 10th International Workshop on Structural Health Monitoring (IWSHM-10), Stanford, CA., USA, 01-03 September, pp.1540-1547 (2015).

39.

LIU, M. and SU, Z., “On Propagation of Shock Waves Generated under Hypervelocity Impact (HVI) and Application to Characterizing Orbital Debris-induced Damage in Space Vehicles”, SPIE Conference on Smart Structures/NDE (Health Monitoring of Structural and Biological Systems IX), San Diego, CA., USA, 08-12 March, pp.94381R-1-9 (2015).

40.

XU, H., SU, Z.CHENG, L. and CAO, M., “A Vibration-based Damage Identification Technique Free of Structural Baseline Information: Experimental Validation in Multi-component Plane Structure”, the 19th International Conference on Vibration Science of Infrastructure Engineering (19th Vibroengineering Conference), Nanjing, P. R. China, 26-28 September, pp.334-338 (2015).

41.

RADECKI, R., SU, Z. and CHENG, L., “An Insight into High-order Harmonic Generation of Lamb Waves Induced by a Breathing Crack Using a Spring Model and a Local Interaction Simulation Approach”, the 10th International Workshop on Structural Health Monitoring (IWSHM-10), Stanford, CA., USA, 01-03 September, pp.1798-1805 (2015).

42.

QIU, L., YUAN, S., SU, Z. and LIU, B., “A New Damage Imaging Method Based on Lamb Wave Wavenumber Response and PZT 2D Cross-shaped Array”, the 19th International Conference on Vibration Science of Infrastructure Engineering (19th Vibroengineering Conference), Nanjing, P. R. China, 26-28 September, pp.193-198 (2015).

43.

HONG, M., MAO, Z., TODD, M.D., SU, Z. and QING, X., “A Probabilistic Model for Quantifying Uncertainty of Acoustic Nonlinearities of Lamb Waves and Its Application to the Characterization of Damage in Composite Laminates”, the 10th International Workshop on Structural Health Monitoring (IWSHM-10), Stanford, CA., USA, 01-03 September, pp.2261-2268 (2015).

44.

HONG, M., MAO, Z., TODD, M., SU, Z. and QING, X., “Uncertainty Quantification of Relative Acoustic Nonlinearity Parameter of Guided Waves for Damage Detection in Composite Structures”, SPIE Conference on Smart Structures/NDE (Health Monitoring of Structural and Biological Systems IX), San Diego, CA., USA, 08-12 March, pp.94380A-1-9, (2015).

45.

WONG, T.T., LAU, K.T., TAM, W.Y., LENG, J.S. and ETCHES, Julie A., “Preventation of UVR Degradation on Polymer-Based Composites By NanoZnO & HGFs”, The Proceeding of the 20th International Conference on Composite Materials, Copenhagen, Denmark (2015).

46.

SALDIVAR MASSIMI, H., WEN, C.Y. and SHEN, H., “Study of Hypersonic Dissociating Flows Over Spheres Using the Space-time CE/SE Method”, Proceedings of the 30th International Symposium of Shock Waves (ISSW30), Tel Aviv, Israel, 19-24 July (2015).

47.

SHEN, H. and WEN, C.Y., “A Characteristic Space-time CE/SE Method for Shock Capturing”, Proceedings of the 30th International Symposium of Shock Waves (ISSW30), Tel Aviv, Israel, 19-24 July (2015).

48.

SHEN, L., WEN, C.Y. and CHEN, H.A., “Leading Edge Vortex Flow Control on a Delta Wing with Single Dielectric Barrier Discharge Plasma Actuators”, Proceedings of the ASME-JSME-KSME Joint Fluids Engineering Conference (AJK2015-FED), Coex, Seoul, Korea, 26-31 July, AJK2015-140029 (2015).

49.

SHI, L.S. and WEN, C.Y., “An Experimental Study of Flow Pattern on a Four-Wings MAV”, Proceedings of the ASME-JSME-KSME Joint Fluids Engineering Conference (AJK2015-FED), Coex, Seoul, Korea, 26-31 July, AJK2015-140023 (2015).

50.

XUE, X.P. and WEN, C.Y., “Numerical Simulation of Aerodynamic Interaction of a Supersonic Parachute System”, 3rd Entry, Deceleration and Landing Conference, Changsha, Hunan, China, 23-25 September (2015).

51.

ZHANG, H., WEN, C.Y. and YANG, A.S., “Optimization of Aerodynamic Performance for a Hovering Model Flapping Wing Using”, Proceedings of the ASME-JSME-KSME Joint Fluids Engineering Conference (AJK2015-FED), Coex, Seoul, Korea, 26-31 July, AJK2015-140187 (2015).

52.

SALDIVAR MASSIMI, H., SHEN, H. and WEN, C.Y., “Numerical Simulation of Ionized Hypersonic Flows using the Space-Time CE/SE Method”, 21th AIAA International Space Planes and Hypersonic Systems and Technologies Conference, Glasgow, Scotland, 6-9 July, AIAA-2015-5906 (2015).

53.

YAO, H., “Crack-Induced Stress Concentration is Suppressed in Nacreous Composites”, Materials Science Forum, Vol. 813, pp.323-336, March (2015).

54.

LI, W.Q., LI, X.Y., YAO, H.M. and ZHOU, L.M., “Si-carbon and Sn-TiO2 Nanocomposites with Long-term”, Proceedings of the 5th East Asia Mechanical and Aerospace Engineering Workshop (EAMAEW), Seoul, Korea, 28-30 May (2015). 

55.

LI, X.Y., CHEN, Y.M., WANG, H.T., YAO, H.M. and ZHOU, L.M., “Tin Nanoparticles Encapsulated in the Porous TiO2-C Nanofibers as Long-term Anodes for Lithium-ion Batteries”, Proceedings of European Materials Research Society Spring Meeting, Lille, France, 11-15 May (2015). 

56.

LI, W.Q., LI, X.Y., TANG, J.J., YAO, H.M. and ZHOU, L.M., “Optimal Si-nanoparticle-based Nanocomposite Structure with Long-term Stability for Li-ion Batteries”, Proceedings of 7th Asia-Europe Symposium on Processing and Properties of Reinforced Polymers, Madrid, Spain, 04-06 February (2015).  

57.

ZHU, X., ZHANG, P., LI, R., LI, D. and QIAN, R., “Experimental Study and Numerical Simulation on a Cross-Drilled Swirl Combustor”, 10th Asia-Pacific Conference on Combustion, Beijing (2015).

58.

CHEN, Q., ZHANG, L. and ZHANG, P., “A Theoretical Kinetics Study of the Reactions of Methylbutanoate with Hydroperoxyl Radical”, 10th Asia-Pacific Conference on Combustion, Beijing (2015).

59.

YU, D., GU, H. and ZHANG, P., “An Energy Integral Method Analysis of Preferred Modes and the Spreading Rates of Supersonic Circular Jets”, 10th Asia-Pacific Conference on Combustion, Beijing (2015).

60.

ZHENG, G.P., “Phase-field Simulation of Volumetric and Surfacial Defects in Metallic Glasses”, China Materials Research Society, Guiyan, China (2015).

61.

ZHOU, L.M., “Environmental Friendly High Performance CBT Thermoplastic Composites”, Proceedings of The 1st International Seminar on Rolling Stock Composite Materials, Zhuzhou, Hunan, PR China, 06-08 December (2015).

62.

CHEN, Y.M., MAI, Y.W. and ZHOU, L.M., “Hollow-tunneled Graphitic Carbon Nanofibres for LIBs”, Proceedings of 7th Asia-Europe Symposium on Processing and Properties of Reinforced Polymers, Madrid, Spain, 04-06 February (2015).

63.

LI, W., LIU, W., ZHOU, L.M., ZHANG, H., LU, Y., SU, Z., HONG, M., LIU, M., XU, H. and LU, B., “A Coated Carbon Nanotube Sensor Network for In-situ Active Sensing of Ultrasonic Elastic Waves”, CANSMART/SMN 2015 - International Conference on Smart Materials, Structures and Nanotechnology, Vancouver, Canada, 15-17 July, pp.127-136 (2015).

64.

LI, X.Y., CHEN, Y.M. and ZHOU, L.M., “TiO2-C Nanofibers with Nano-Sn Particles for Lithium Ion Batteries”, Proceedings of 12th International Conference on Nanosciences and Nanotechnologies, Thessaloniki, Greece, 07-10 July (2015).

65.

LI, X.Y., CHEN, Y.M. and ZHOU, L.M., “Electrospun Nanostructured Composite Fiber Anodes for Li-ion Batteries”, Proceedings of Energy Materials Nanotechnology Istanbul Meeting (EMN), Istanbul, Turkey, 01-04 July (2015). 

66.

LI, X.Y., CHEN, Y.M. and ZHOU, L.M., “TiO2-C Nanofibers with Nano-Sn Particles for Lithium Ion Batteries”, Proceedings of 12th International Conference on Nanosciences and Nanotechnologies, Thessaloniki, Greece, 07-10 July (2015).

67.

LI, X.Y., CHEN, Y.M. and ZHOU, L.M., “Electrospun Nanostructured Composite Fiber Anodes for Li-ion Batteries”, Proceedings of Energy Materials Nanotechnology Istanbul Meeting, Istanbul, Turkey, 01-04 July (2015).

68.

CHENG, L., “Airframe Vibration and Aircraft Cabin Noise Control”, 4th International Conference on Mechatronics and Applied Mechanics (ICMAM2014), Shenzhen, China, 17-18 Decemeber (2014). (Keynote)

69.

CHENG, L., “Design and Optimization of Sound Absorption Using MPP”, 2014 Forum on Vibration and Noise Control of Equipment, Changsha, China, 21-23 November (2014). (Keynote)

70.

CHENG, L., “Micro-perforates for Noise Control in Vibroacoustic Systems”, 3rd International Symposium and Workshop on Acoustics and Vibration (ISWAV 2014), Hangzhou, China, 18-22 July (2014). (Keynote)

71.

CHENG, L., SU, Z. and XU, H., “Integral Utilization of Multi-types of Structural Vibration Signals for Damage Identification Based on the “Weak” Formulation of Pseudo-Excitation (PE) Technique: Virtual Vibration Deflection (VVD)”, International Workshop on Health Monitoring of Offshore Wind Farms (HEMOW), Nanjing, China, 26 September (2014). (Invited talk)

72.

CHENG, L., “Micro-perforates in Vibroacoustic Systems”, 18th Annual Conference of HKTAM 2014, 10th Shanghai-Hong Kong Forum on Mechanics and its Applications, Hong Kong, 15 March (2014). (Keynote)

73.

HALIM, D. and CHENG, L., “Active Noise Control Experiments for an Acoustic-Structural Coupled Enclosure Using Structural-Based Virtual Sensors”, 43rd International Congress on Noise Control Engineering (Inter-Noise 2014), Melbourne, Australia, 16-19 November (2014).

74.

JI, H.L., CHENG, L., QIU, J.H. and NIE, H., “Semi-active Noise Suppression Based on SSD Technique Using Piezoelectric Elements”, 43rd International Congress on Noise Control Engineering (Inter-Noise 2014), Melbourne, Australia, 16-19 November (2014).

75.

YANG, C. and CHENG, L., “Micro-perforated Panel Absorber in Small Scale Cavity”, Proc. 21st Int. Cong. Sound Vib., Beijing, 13-17 July (2014).

76.

YU, X., CHENG, L., TONG, Y.H. and PAN, J., “Sound Attenuation Using Duct Silencers with Micro-Perforated Panel Absorbers”, 43rd International Congress on Noise Control Engineering (Inter-Noise 2014), Melbourne, Australia, 16-19 November (2014).

77.

YU, X. and CHENG, L., “Modelling and Optimization of Duct Silencers with Complex Internal Partitions”, Proc. 21st Int. Cong. Sound Vib., Beijing, 13-17 July (2014).

78.

ZIAJA, A., CHENG, L.SU, Z., STASZEWSKI, W., UHL, T. and PACKO, P., “On the Coupling of Guided Cylindrical Waves in Thick-walled Structures”, Proceedings of the 7th European Workshop on Structural Health Monitoring (EWSHM-7), edited by LE CAM, V., MEVEL, L. and SCHOEFS, F., Nantes, France , 8-11 July, pp.317-324 (2014).

79.

ZIAJA, A., CHENG, L.SU, Z., STASZEWSKI, W., UHL, T. and PACKO, P., “Elastic Waves Characteristics in Thick-walled Hollow Cylinders with Internal/External Surface Excitation for Train Axle Monitoring”, Proceedings of the 2014 Far East Forum on Nondestructive Evaluation/Testing: New Technology and Application (FENDT2014), Chengdu, China, 20-23 June (2014).

80.

JI, H.L., QIU, J.H., ZHANG, J., NIE, H. and CHENG, L., “Non-Symmetrical Semi-Active Vibration Control Based on Synchronized Switching Damping”, Proc. 21st Int. Cong. Sound Vib., Beijing, 13-17 July (2014).

81.

JI, H.L., QIU, J.H., ZHANG, J., NIE, H., YANG, L. and CHENG, L., “Non-Symmetrical Semi-Active Vibration Control Based on Synchronized Switching Damping”, Proc. SPIE 9057, Active and Passive Smart Structures and Integrated Systems, San Diego, USA, 9-13 March (2014).

82.

RADECKI, R., LEMAY, M.J., UHL, T., STASZEWSKI, W.J., SU, Z.Q.CHENG, L. and PACKO, P., “Investigation on High-order Harmonic Generation of Guided Waves Using Local Computation Approaches: Theory and Comparison with Analytical Modelling”, 7th European Workshop on Structural Health Monitoring, Nantes, France, 8-11 July (2014).

83.

CHEUNG, C.S., MAN, X.J., FONG, K.W. and TSANG, O.K., “Effect of Waste Cooking Oil Biodiesel on the Emissions of a Diesel Engine”,  The 12th International Conference on Combustion and Energy Utilisation, Lancaster, UK, 29 September – 2 October, Paper No.54 (2014).

84.

MAN, X.J., CHEUNG, C.S. and NING, Z., “Effect of Diesel Engine Operating Conditions on the Particulate Size, Nanostructure and Oxidation Properties when Using Wasting Cooking Oil Biodiesel”,  The 12th International Conference on Combustion and Energy Utilisation, Lancaster, UK, 29 September – 2 October, Paper No.23 (2014).

85.

CHIANG, Y.K., CHOY, Y.S.CHENG, L. and TANG, S.K., “Study on Aero-acoustic Structural Interactions in Fan-ducted System”, 43rd International Congress on Noise Control Engineering (Inter-Noise 2014), Melbourne, Australia, 16-19 November (2014).

86.

LIU, Y., CHOY, Y.S. and CHIANG, Y.K., “Performance of Multiple Micro-perforated Panels in a Duct”, the 43rd International Congress on Noise Control Engineering, Melbourne, Australia, 16-19 November (2014).

87.

XI, Q., CHOY, Y.S.CHENG, L. and TANG, S.K., “Numerical and Experimental Study on the Suppression of Sound Radiation from Sound Source in the Duct by MPP”, Proc. 21st Int. Cong. Sound Vib., Beijing, 13-17 July (2014).

88.

WANG, X.N., CHOY, Y.S. and CHENG, L., “Hybrid Broadband Silencers”, Proc. 21st Int. Cong. Sound Vib., Beijing, 13-17 July (2014). 

89.

FUNG, E.H.K., HOU, N.J., YU, H.F. and WONG, W.O., “Simulation, Prediction and Compensation of Transient Thermal Deformations of a Reciprocating Linear Slide for F8S Motion Error Separation”, Proceedings of the 3rd International Conference on Mechanical Engineering and Mechatronics, Prague, Czech Republic, Paper No. 139 (2014).

90.

YU, H.F., FUNG, E.H.K. and JING, X.J., “An Improved ZMP-based CPG Model Considering Pitch and Roll Inclinations”, Proceedings of the 3rd International Conference on Mechanical Engineering and Mechatronics, Prague, Czech Republic, Paper No. 138 (2014).

91.

JING, X.J., “A Frequency-domain Approach to Crack-related Fault Detection”, 2014 IEEE Chinese Guidance, Navigation and Control Conference (IEEE CGNCC 2014), Yantai, China, 8-10 August, IEEE Catalog Number: CFP1429X-ART (2014).

92.

JING, B. and JING, X.J., “Biomimetic Design of Woodpecker for Shock and Vibration Protection”, 2014 IEEE International Conference on Robotics and Biomimetics, Bali, Indonesia, 5-10 December (2014). 

93.

SUN, X.T., JING, X.J.CHENG, L. and XU, J., “Effect of Coulomb Friction on Nonlinear Vibration Isolation System”, The 21st International Congress on Sound and Vibration, Beijing, China, 13-17 July (2014). 

94.

WANG, H., JING, X.J. andBIU, B., “A Weighted Bacterial Colony Optimization for Feature Selection”, ICIC 2014, LNBI8590, pp.370-389 (2014).

95.

WONG, T.T., LAU, K.T. and TAM, W.Y., “Hollow Glass Fibre Reinforced Epoxy Composite Filled with Nano-ZnO Possesses UV Absorbability”, The Proceedings of 1st International Conference on Computational and experimental methods for composite materials and structures Harbin University of Science and Technology, China  10-12 September (2014).

96.

LIU, Y., YAN, W.W., LU, M.Z. and FU, B.M., “Computational Bio-Fluid Mechanics: From Cell Adhesion in Microcirculation to Airflow in Upper Airway”, Proceeding of the 10th Asian Computational Fluid Dynamics Conference, 19-23 October, Jeju, Korea (Keynote Lecture) (2014).

97.

LIU, Y. and LU, J., “The Thermodynamic analysis of Vasomotion”, The 7th World Congress of Biomechanics, 6-11 July, Boston, USA (2014).

98.

LU, M.Z. and LIU, Y., “Flow Pattern Comparison between LES and Unsteady Reynolds-Average Navier-Stokes Modeling for the Upper Airway Model”, International Conference on Heat Transfer and Fluid Flow (HTFF'14), 11-12 August, Prague, Czech Republic (2014).

99.

LU, M.Z., LIU, Y. and YE, J.Y., “The Comparison of Flow Patterns in OSA Upper Airways between Successful and Failed Surgeries”, The 7th World Congress of Biomechanics, 6-11 July, Boston, USA (2014).

100.

LU, M.Z., LIU, Y., YE, J.Y. and LUO, H.Y., “Large Eddy Simulation of Flow in Realistic Human Upper Airways with Obstructive Sleep”, International Conference on Computational Science, 10-12 June, Cairns, Australia, Procedia Computer Science, Vol. 29, pp.557-564 (2014).

101.

LU, M.Z., LIU, Y. and YE, J.Y., “Large Eddy Simulation of Two Patients with Obstructive Sleep Apnea at Pre and Post-Surgery”, The 18th Annual Conference of HKSTAM 2014 / The 10th Shanghai – Hong Kong Forum on Mechanics and Its Application, 15 March, Hong Kong (2014).

102.

FAN, S.W., LU, M.Z., LIU, Y. and XU, Y.S., “LES Simulation of River Flow with Free Surface”, The 18th Annual Conference of HKSTAM 2014 / The 10th Shanghai – Hong Kong Forum on Mechanics and Its Application, 15 March, Hong Kong (2014).

103.

SHI, S.Q., “A Quantitative Free Energy Functional for Phase-field Modeling of Microstructure Evolution during Solid State Phase Transformation in Binary Alloys”, the 11th World Congress on Computational Mechanics-5th European Conference on Computational Mechanics-6th European Conference on Computational Fluid Dynamics, Barcelona, Spain, 20-25 July (2014).

104.

SHI, S.Q., “Modeling of Hydride Morphology in Zirconium under Stress and Temperature Gradients”, the 22nd International Conference on Nuclear Engineering, Prague, Czech Republic, 7-11 July (2014).

105.

SHI, S.Q., XIAO, Z.H. and HAO, M.J., “Quantitative Elastoplastic Phase-field Model for Microstructural Evolution of Hydride Precipitation in Zirconium under Stress and Temperature Gradients”, the 1st International Workshop on Software Solutions for Integrated Computational Materials Engineering, Rolduc, Netherlands, 24-27 June (2014).

106.

XIAO, Z.H., SHI, S.Q., SEMENOV, A.A. and WOO, C.H., “Void Dynamics in Phase Field Modeling”, 7th International Conference on Multiscale Materials Modeling, Berkeley, California, USA, 6-10 October (2014).

107.

CHEN, K.G., ZHU, W.J. and SHI, S.Q., “MD Modeling of Mechanical Responses of Coated Copper Nanowire”, 13th National Conference in Physical Mechanics, Xiangtan, Hunan, China, 19 October (2014). 

108.

GAO, K.L., ZHANG, Z.K., SHI, S.Q. and GUO, X., “The Influence of Disuse on Bone Microarchitecture and Intrinsic Mechanical Properties”, 9th Pan-Pacific Conference on Rehabilitation cum 21st Annual Congress of Gerontology, 29-30 November (2014).

109.

LI, N.N., LUO, J.L., SHI, S.Q. and LU, J., “Effect of SMAT on Corrosion Properties of Materials in Steam Generator”, NACE International Annual Conference & Expo 2014, Beijing, China, 19-22 May (2014).

110.

 

LI, N.N., LUO, J.L., SHI, S.Q. and LU, J., “Effect of SMAT on Corrosion Properties of Materials in Steam Generator”, ACE International Northern Area Western Conference, Edmonton, Alberta, Canada, 27-30 January (2014).

111.

HONG, M., SU, Z., LU, Y. and CHENG, L., “Investigation on High-order Harmonic Generation of Guided Waves Using Local Computation Approaches: Theory and Comparison with Analytical Modelling”, 7th European Workshop on Structural Health Monitoring, Nantes, France, 8-11 July (2014).

112.

HONG, M., SU, Z., LU, Y. and CHENG, L., “Temporal Information of Linear and Nonlinear Lamb Waves for Fatigue Damage Localization: Analysis and Synthesis”, Proceedings of the 7th European Workshop on Structural Health Monitoring (EWSHM-7), edited by LE CAM, V., MEVEL, L. and SCHOEFS, F., Nantes, France, 8-11 July, pp.732-739 (2014).

113.

HONG, M., SU, Z., LU, Y. and CHENG, L., “Fatigue Damage Localization Using Time-domain Features Extracted from Nonlinear Lamb Waves”, Proceedings of the SPIE (Vol. 9064, Proceedings of SPIE Conference on Smart Structures/NDE (Health Monitoring of Structural and Biological Systems VIII)), edited by KUNDA, T., San Diego, CA., USA, 9-13 March, pp.906405-1-13 (2014).

114.

LIU, M., SU, Z. and YUAN, S., “On Propagation Characteristics of Shock Waves Generated under Hypervelocity Impact”, Proceedings of the 2nd International Conference on Structural Health Monitoring and Integrity Management (ICSHMIM-2014), edited by DING, K., YUAN, S. and WU, Z., Taylor & Francis Group, Nanjing, P. R. China, 24-26 September (2014).

115.

WANG, B., SU, Z., HONG, M. and WEI, J., “Evaluation of Fatigue Damage and Loosening Bolts in Bolted Joints Using Nonlinearities of Lamb Waves”, Proceedings of the 5th Asia-Pacific Workshop on Structural Health Monitoring Conference (SHM 2014), edited by LI, H., TENG, J., CHIU, W.K. and MITA, A., Shenzhen, P. R. China, 4-5 December (2014).

116.

WANG, Q. and SU, Z., “A Crack Diagnosis and Monitoring Method Using Linear Phased PZT Sensor Array”, Proceedings of the 2nd International Conference on Structural Health Monitoring and Integrity Management (ICSHMIM-2014), edited by DING, K., YUAN, S. and WU, Z., Taylor & Francis Group, Nanjing, P. R. China, 24-26 September (2014).

117.

WANG, Q., SU, Z. and HONG, M., “Online Damage Monitoring for High-speed Train Bogie Using Guided Waves: Development and Validation”, Proceedings of the 7th European Workshop on Structural Health Monitoring (EWSHM-7), edited by LE CAM, V., MEVEL, L. and SCHOEFS, F., Nantes, France, 8-11 July pp. 143-150 (2014).

118.

 

HONG, M., WANG, Q., SU, Z. and ZHOU, L.M., “Real-time Signal Processing of Guided Waves Acquired on High-speed Trains for Health Monitoring of Bogie Systems”, Recent Advances in Structural Integrity Analysis - Proceedings of the International Congress (APCF/SIF-2014) (Asian-Pacific Conference on Fracture and Strength (APCFS-2014) and International Conference on Structural Integrity and Failure (SIF-2014)), edited by Ye, L., Cambridge: Woodhead Publishing Ltd., ISBN: 978-0-08-100203-2, Sydney, Australia, 9-12 December, pp.188-192 (2014).

119.

HONG, M., WANG, Q. and SU, Z., “A Guided Wave Approach for Real-time Health Monitoring of High-speed Train Bogie Frames”, Proceedings of the 2014 IEEE Far East Forum on Nondestructive Evaluation/Testing: New Technology and Application (FENDT2014), edited by XU, C., YANG, L. and PAN, Q., Institute of Electrical and Electronics Engineers (IEEE), Inc., ISBN: 978-1-4799-4730-0, Chengdu, China, 20-23 June, pp.39-43, (2014).

120.

LU, Y., LI, J.C., LYU, H.B., HONG, M. and SU, Z., “The Application of Guided Waves for Debonding Identification in FRP-reinforced Civil Structures”, Proceedings of the 5th Asia-Pacific Workshop on Structural Health Monitoring Conference (SHM 2014), edited by LI, H., TENG, J., CHIU, W.K. and MITA, A., Shenzhen, P. R. China, 4-5 December (2014).

121.

RADECKI, R., LEAMY, M., UHL, T., STASZEWSKI, W., SU, Z.CHENG, L. and PACKO, P., “Investigation on High-order Harmonic Generation of Guided Waves Using Local Computation Approaches: Theory and Comparison with Analytical Modelling”, Proceedings of the 7th European Workshop on Structural Health Monitoring (EWSHM-7), edited by LE CAM, V., MEVEL, L. and SCHOEFS, F., Nantes, France, 8-11 July, pp.575-582 (2014).

122.

WONG, T.T., TAM, W.Y. and ETCHES, J.A., “A Nano-ZnO Filled Hollow Glass Fibre Reinforced Epoxy Composite with UV Resistability”, The Proceedings of 3rd International Conference on Nanomechanics and Nanocomposites (ICNN-3), Hong Kong, China, 22-25 May (2014). 

123.

SALUNKHE, P., TANG, H., ZHENG, Y. and WU, Y., “PIV Measurements on a Wing Model Controlled by Synthetic jets”, 16th International Symposium on Flow Visualization, Okinawa, Japan, June (2014).

124.

WANG, L. and TANG, H., “Nonlinear Simulation of a Submerged Circular Cylinder Undergoing Large-amplitude Heave Motions”, 24th International Ocean and Polar Engineering Conference, Busan, Korea, June (2014).

125.

LYU, X., WEI, Z., TANG, H., NEW, T.H., and LI, H., “On the Motion of a Falling Circular Cylinder in Flows after Water Entry”, The International Conference on Experimental Mechanics and 13th Asian Conference on Experimental Mechanics, Singapore, November (2014).

126.

RUBIO HERVAS, J., REYHANOGLU, M., and TANG, H., “Nonlinear Automatic Landing Control of Unmanned Aerial Vehicles on Moving Platforms via a 3D Laser Radar”, ICNPAA 2014 World Congress: 10th International Conference on Mathematical Problems in Engineering, Aerospace and Sciences, Narvik University, Norway, July, AIP Conf. Proc. 1637, DOI: 10.1063/1.4904663, pp.907-917 (2014).

127.

RUBIO HERVAS, J., REYHANOGLU, M., and TANG, H., “Automatic Landing Control of Unmanned Aerial Vehicles on Moving Platforms”, 2014 IEEE International Symposium on Industrial Electronics, Istanbul, Turkey, June, DOI: 10.1109/ISIE.2014.6864588, pp.69-74 (2014).

128.

WEN, X., TEO, K. and TANG, H., “Experimental Study of in-line Twin Synthetic Jets in a Laminar Boundary Layer”, 16th International Symposium on Flow Visualization, Okinawa, Japan, June (2014).

129.

RUBIO HERVAS, J., KAYACAN, E., REYHANOGLU, M., and TANG, H., “Sliding Mode Control of Fixed-wing UAVs in Wind Environments”, 13th International Conference on Control, Automation, Robotics and Vision, Singapore, December (2014).

130.

WEN, C.Y., YANG, A.S., and TSENG, J.W., “Application of Valve-less Impedance Pumps to a Direct Sodium Borohydride–Hydrogen Peroxide Fuel Cell”, Proceedings of the ASME 2014 4th Joint US-Euopean Fluids Engineering Division Summer Meeting and 11th International Conference on Nanochannels, Microchannels, and Minichannels (FEDSM2014), Chicago, Illinois, U.S.A., FEDSM2014-21836, 3-7 August (2014).

131.

OGAWA, H., WEN, C.Y., and CHANG, Y.C., “Physical Insight into Fuel Mixing Enhancement with Backward-Facing Step for Scramjet Engines Via Multi-Objective Design Optimization”, 29th Congress of the International Council of the Aeronautical Sciences (ICAS), St. Petersburg, Russia, 7-12 September (2014).

132.

SHEN, H., WEN, C.Y., and SALDIVAR MASSIMI, H., “Application of CE/SE Method to Study Hypersonic Non-equilibrium Flows over Spheres”, 20th AIAA International Space Planes and Hypersonic Systems and Technologies Conference, Atlanta, Georgia, U.S.A., AIAA-2014-5906, 16-20 June (2014).

133.

JIANG, Z.Y. and ZHENG, G.P., “The Structural and Pyroelectric Properties of Graphene Oxide/PVDF Nanocomposites”, 8th International Conference on Advanced Computational Engineering and Experimenting, Paris, France, June (2014).

134.

UDDIN, S., ZHENG, G.P., IQBAL, Y. and UBIC, R., “Phase, Microstructure and Electrocaloric Properties of (1-x)Bi1/2Na1/2TiO3-xBaTiO3 Ceramics Prepared by Sol-gel Technique, Symposium of Nano and Giga Challenges in Electronics”, Photonics and Renewable Energy, Phoenix, Arizona, 10-14 March (2014). 

135.

ZHANG, H.Y. and ZHENG, G.P., “Simulation of Deformation of Bulk Metallic Glasses with Nano-Sized Pores”, 8th International Conference on Advanced Computational Engineering and Experimenting, Paris, France, June (2014).

136.

UDDIN, S., IQBAL, Y., ZHENG, G.P. and UBIC, R., “Coexistence of Positive and Negative ECE in Sol-gel Derived (1-x)Bi0.5Na0.5TiO3-xBaTiO3 Ceramics”, International Scientific Spring (ISS-2014), NCP, Islamabad, March (2014).

137.

CHEN, X.T., ZHOU, L.M. and HUANG, H.T., “MnS/Carbon Composite Electrode for Quantum Dot Sensitized Solar Cells”, 3rd International Conference on Nanomechanics and Nanocomposites (ICNN-3), 22-25 May, Hong Kong (2014).

138.

LEUNG, W.Y., ZHOU, L.M.SHI, S.Q. and LU, J., “Investigation of Various Factors during SMAT by Simulation Approach”, 3rd International Conference on Nanomechanics and Nanocomposites (ICNN-3), 22-25 May, Hong Kong (2014).

139.

CHEN, Y.M., LI, X.Y., ZHOU, L.M., MAI, Y.W., HUANG, H.T., and GOODENOUGH, J.B., “High-Performance N-doped Hollow Carbon-Nanotube@Carbon- Nanofiber Hybrid Anodes for Li-Ion Batteries”, Presented in MRS Fall, 30 November – 05 December, San Fancisco (2014).

140.

LI, X.Y., CHEN, Y.M., HUANG, H.T., MAI, Y.W. and ZHOU, L.M., “High-performance Core-shell TiO2-MnO2 Composite Nanofibers Lithium Ion Battery Anodes”, Presented in 3rd International Conference on Nanomechanics and Nanocomposites (ICNN-3), 22-25 May, Hong Kong (2014).

141.

CHEN, Y.M., LIU, C., SUN, X.X., YE, H., CHEUNG, C.S. and ZHOU, L.M., “High-Performance Porous Diesel Carbon Nanoparticles Anodes for Lithium-Ion Batteries,”3rd International Conference on Nanomechanics and Nanocomposites (ICNN-3), 22-25 May, Hong Kong (2014). 

142.

CAO, M.S., CHENG, L. and SU, Z.Q., “A Weak Formulation for Detection of Debonding in Steel-reinforced Concrete Structures Based on Locally Perturbed Structural Vibration”, 15th Asia Pacific Vibration Conference, Jeju, Korea, 2-6 June (2013)

143.

CHENG, L., “Controlling Flow-Structure-Sound Interatction Using Adaptive Structures” (Keynote), 15th Asia Pacific Vibration Conference, Jeju, Korea, 2-6 June (2013)

144.

LU, Z.B., HALIM, D. and CHENG, L., “Flow-induced Noise Control Behand Bluff Bodies with Various Leading Edges”, 6th ECCOMAS Thematic Conference on Smart Structures and Materials (SMART’13),  Torino, Italy, 24-26 June (2013)

145.

XU, H., CHENG, L., SU, Z. and GUYADER, J.L., “Identification of Structural Damage Based on a “Weak” Formulation of Locally Perturbed Structural Vibration”, in Structural Health Monitoring 2013: A Roadmap to Intelligent Structures - Proceedings of the 9th International Workshop on Structural Health Monitoring (IWSHM-9), Stanford, CA., USA, 10-12 September (2013)

146.

YU, X., CHENG, L. and GUYADER, J.L., “Vibroacoustic Modelling of Cascade Panels System involving Aperture and Micro-perforated Elements”, The 20th International Congress on Sound and Vibration, Bangkok, Thailand, 7-11 July (2013)

147.

WEI, L.J., CHEUNG, C.S. and HUANG, Z.H., “Experimental Study on Performance and Emissions of Diesel/n-pentanol Blends on a Diesel Engine”, The 9th Asia-Pacific Conference on Combustion, Gyeongju, Korea, 19-22 May (2013)

148.

ZHOU, J.H., CHEUNG, C.S. and LEUNG, C.W., “Combustion and Emission of a Compression Ignition Engine Fueled with Diesel and Hydrogen-methane Mixture”, World Academy of Science, Engineering and Technology Conference, Amsterdam, The Netherlands, 8-9 August (2013)

149.

ZHOU, J.H., CHEUNG, C.S. and LEUNG, C.W., “Performance and Emission Characteristics of a Diesel Engine Fueled with ULSD-H2 and PME-H2”, The 9th Asia-Pacific Conference on Combustion (the 9th ASPACC), Gyeongju, Korea, 19-22 May (2013)

150.

BRISTOW, A.L., CHAU, C.K., HOROSHENKOV, K.V. and CHOY, Y.S., “Assessing Valuing Restorative Space on Campus: A Comparison between the UK and Hong Kong”, Internoise 2013, Innsbruch, Austria, 15-18 September (2013)

151.

NG, H.T., TANG, S.K. and CHOY, Y.S., “Noise Barrier with Acoustical Cavity Structure”, Internoise 2013, Innsbruch, Austria, 15-18 September (2013)

152.

XI, Q., CHOY, Y.S., TANG, S.K. and CHENG, L., “Noise Control of Monopole Source in Short Duct by Using Micro-perforated Panel”, The 20th International Congress on Sound and Vibration, Bangkok, Thailand, 7-11 July (2013)

153.

RAN, J.Q. and FU, M.W., “A Hybrid Fracture Prediction Models of Multi-phase Metals in Micro-scaled Forming Processes”, International Conference on MicroManufacturing 2013, Victoria, Canada, 26-29 March (2013)

154.

SUN, X.T., JING, X.J., XU, J. and CHENG, L., “Study on the Performance and Mechanism of an Isolation Platform with Linear Friction”, The 9th International Conference on Vibration Engineering and Technology of Machinery (VETOMAC-IX), Nanjing, PRC, 20-23 August (2013)

155.

XIAO, Z.L., JING, X.J. and CHENG, L., “Parametric Convergence Bounds for Volterra Series Expansion of Nonlinear Multi-Degree-of-Freedom Systems”, The 9th International Conference on Vibration Engineering and Technology of Machinery (VETOMAC-IX), Nanjing, PRC, 20-23 August (2013)

156.

XIAO, Z.L., JING, X.J. and CHENG, L., “Computation of Parametric Convergence Bound and Parametric Convergence Margin for Volterra Series Expansion”, The 9th Asian Control Conference (ASCC 2033), Istanbul, Turkey, 23-27 June (2013)

157.

TSE, H., LEUNG, C.W. and CHEUNG, C.S., “Influence of Intake CO2 Charge Dilution on the Performance and Emissions of a Diesel Engine Fueled with Diesel-biodiesel-ethanol Fuel”, The 9th Asia-Pacific Conference on Combustion (the 9th ASPACC), Gyeongju, Korea, 19-22 May (2013)

158.

FAN, H.K.H., LEUNG, R.C.K. and LAM, G.C.Y., “A Time-Domain Analysis for Aeroacoustics-Structure Interaction of Flexible Panel”, The 19th AIAA/CEAS Aeroacoustics Conference, Berlin, Germany (2013)

159.

HUNG, W.T., LAM, Y.K., NG, C.F. and LEUNG, R.C.K., “The Impacts of Tyre Hardness and Tread Depth on Tyre/Road Noise”, The 20th International Congress on Sound and Vibration (ICSV20), Bangkok, Thailand (2013)

160.

AK, E.Y.W. and LEUNG, W.W.F., “A Novel Nanofibrous Scaffold to Improve Wound Healing”, International Mechanical Engineering Congress and Exposition (IMECE), San Diego, California, USA, 15-21 November (2013)

161.

LEUNG, W.W.F. and REN, Y., “Scale-up Laws on Mixing of Two Fluids in a Rotating Microchannel”, International Mechanical Engineering Congress and Exposition (IMECE), San Diego, California, USA, 15-21 November (2013)

162.

LEUNG, W.W.F. and REN, Y., “Numerical Investigation of Flow and Heat Transfer in Passages for Jet Impingement in Cooling of Rotating Turbine Blade”, International Mechanical Engineering Congress and Exposition (IMECE), San Diego, California, USA, 15-21 November (2013)

163.

PEI, C.C. and LEUNG, W.W.F., “Enhanced Photocatalytic Activity on the Removal of NO by Electrospun TiO2/ZnO Nanofibers with Optimal Anatase/rutile Ratio”, The 19th International Conference on Advanced Oxidation Technologies for Treatment of Water, Air and Soil, San Diego, California, USA, 17-21 November (2013)

164.

PEI, C.C. and LEUNG, W.W.F., “Visible-light Induced Photocatalytic Degradation of Rhodamine B by TiO2/ZnO Composite Nanofibers”, The 19th International Conference on Advanced Oxidation Technologies for Treatment of Water, Air and Soil, San Diego, California, USA, 17-21 November (2013)

165.

PEI, C.C. and LEUNG, W.W.F., “Solar photocatalytic degradation of NO by electronspun TiO2/ZnO nanofiber mats for enhancement of indoor air quality”, The 19th International Conference on Advanced Oxidation Technologies for Treatment of Water, Air and Soil, San Diego, California, USA, 17-21 November (2013

166.

REN, Y. and LEUNG, W.W.F., “Vortical Flow and Mixing in Rotating Milli/micro Chambers”, International Mechanical Engineering Congress and Exposition (IMECE), San Diego, California, USA, 15-21 November (2013)

167.

YANG, L.J. and LEUNG, W.W.F., “Electrospun TiO2 Nanorod with Carbon Nanotube for Efficient Electron Collection in Dye Sensitized Solar Cell”, International Mechanical Engineering Congress and Exposition (IMECE), San Diego, California, USA, 15-21 November (2013)

168.

LIU, Y., CHOY, Y.S., HUANG, L. and CHENG, L., “Noise Control of Subsonic Axial Fan in a Duct”, The 20th International Congress on Sound and Vibration, Bangkok, Thailand, 7-11 July (2013)

169.

LIU, Z.G., LIU, Y. and LU, J., “Instability of Axial-flow Induced Vibrations of Cylindrical Clusters”, The 5th International Symposium "Instabilities and Bifurcations in Fluid Mechanics", Haifa, Israel, July 8-11 (2013)

170.

LIU, Z.G., LIU, Y. and LU, J., “Numerical Simulation for Axial-flow Induced of a Cylindrical Cluster”, The 5th International Symposium on Physics of Fluids (ISPF5), Changbaishan, China, 10-13 June (2013)

171.

LIU, Z.G., LIU, Y. and LU, J., “The Numerical Simulation of Fluid-Structure Interaction on a Simple Cluster in an Axial Flow”, 2nd Symposium on Fluid-Structure-Sound Interactions and Control, Hong Kong and Macau, 20-23 May 2013

172.

LIU, Z.G., LIU, Y. and LU, J., “Axial-flow-induced Vibrations of Cylindrical Clusters”, The 17th Annual Conference of HKSTAM 2013, Hong Kong and Macau, 22-23 March (2013)

173.

LU, M.Z., LIU, Y. and YE, J.Y., “Flow Pattern Comparison in Upper Airways of Two OSA Subjects before and after Surgery”, The 19th Congress of the European Society of Biomechanics (ESB2013), Patras, Greece, 25-28 August 2013 (2013)

174.

LU, M.Z., LIU, Y. and YE, J.Y., “Prediction of Surgical Outcome on Patients with Obstructive Sleep Apnea Using Large Eddy Simulation”, WACBE World Congress on Bioengineering 2013, Beijing, China, 5-8 August (2013)

175.

LU, M.Z., LIU, Y. and YE, J.Y., “Numerical Investigation of the Flow in the Upper Airway with Obstructive Sleep Apnea”, The 17th Annual Conference of HKSTAM 2013, Hong Kong and Macau, 22-23 March (2013)

176.

KUANG, Y.D. and SHI, S.Q., “Velocity Analysis of the Axial Oscillation of Water Chain in a (6, 6) Single-walled Carbon Nanotube”, 3rd International Conference in Nanotechnology, Toronto, Canada, 12-14 August (2013)

177.

SHI, S.Q., “Overview of the Application of Phase-field Method in Hydrogen Embrittlement and Localized Corrosion”, Keynote Talk at China Environmental Fracture Conference, Wu Yuan, Jiangxi, China, 9-12 October (2013)

178.

SHI, S.Q., “Hydride Blister in Zirconium”, The 21st International Conference in Nuclear Engineering, Chengdu, China, 27 July-2 August (2013)

179.

SHI, S.Q., “Quantitative Modeling of Hydride Blister in Zirconium”, Keynote Talk at the 13th International Conference on Fracture, Beijing, China, 17-22 June (2013)

180.

HONG, M., WANG, Q., SU, Z., CHENG, L. and NI, Y., “In-situ Guided-wave-based Health Monitoring for Train Bogie Structures: Technique Development and Application to Beijing-Shanghai High-speed Railway”, in Structural Health Monitoring 2013: A Roadmap to Intelligent Structures - Proceedings of the 9th International Workshop on Structural Health Monitoring (IWSHM-9), Stanford, CA., USA, 10-12 September (2013)

181.

HONG, M., ZHOU, C., SU, Z.Q., CHENG, L. and QING, X.L., “Nonlinear Properties of Lamb Waves under Modulation of Fatigue Damage: Finite Element Simulation with Experimental Validation”, The 4th Asia-Pacific Workshop on Structural Health Monitoring, Melbourne, Australia, 5-7 December (2013)

182.

WANG, Q., SU, Z. and HONG, M., “Lamb Wave Based Structural Health Monitoring Technique and Its System Validation for High-speed Train”, The 32nd Chinese Control Conference, Xi’an, P. R. China, 26-28 July (2013)

183.

WANG, Q., HONG, M., SU, Z. and XU, J., “A Guided Wave Based Online Health Monitoring Technique for High-speed Train Bogie Structures”, The 2013 International Conference on Electrical Engineering and Information Technologies for Rail Transportation, Changchun, P. R. China, 7-10 November (2013)

184.

XU, H., SU, Z., CHENG, L., GUYADER, J.L., “Identification of Damage in Structural Components Using Multi-scale Pseudo-Force Model”, 15th Asia Pacific Vibration Conference, Jeju, Korea, 2-6 June (2013)

185.

XU, H., SU, Z., CHENG, L., GUYADER, J.L. and HAMELIN, P., “Debonding Detection for Steel-Reinforced Concrete Structures Based on Locally Perturbed Structural Vibration”, in Structural Health Monitoring for Infrastructure Sustainability - Proceedings of the 6th International Conference on Structural Health Monitoring of Intelligent Infrastructure (SHMII-6), The Hong Kong Polytechnic University, Hong Kong,  9-11, December (2013)

186.

XU, W., OSTACHOWICZ, W., CAO, M. and SU, Z., “Detection of Damage in Beams Using Teager Energy Operator”, SPIE Conference on Smart Structures/ Non-Destructive Evaluation, San Diego, CA., USA, 10-14 March (2013)

187.

XU, Y., ZHU, S., XIA, Y., NI, Y.Q., LAW, S.S., YIN, J.H. and SU, Z., “Structural Health Monitoring for Infrastructure Sustainability”, Proceedings of the 6th International Conference on Structural Health Monitoring of Intelligent Infrastructure (SHMII-6), The Hong Kong Polytechnic University, Hong Kong, 9-11, December (2013)

188.

SALÍVAR MASSIMI, H., CHEN, Y.S., LIAN, Y.Y., SU, C.C., LO M.C, WEN, C.Y., WU, J.S., BONDAR, Y.A., IVANOV, M.S., and LIANG, S.M., “Assessment of Hypersonic Reentry Flow Modeling with Thermal Nonequilibrium Air Chemistry”, International Conference on Flow Dynamics, Sendai, Japan, 25-27 November (2013)

189.

WEN, C.Y., CHANG, Y.C., SU, Y.H. and YUAN, H.F., “The Effect of the Recombination Shock behind a Backward Step on the Mixing Characteristics of an Inclined Sonic Methane Jet in a Supersonic Crossflow”, The 29th International Symposium of Shock Waves, Madison, Wisconsin, U.S.A., 14-19 July (2013)

190.

YANG, A.S., WEN, C.Y., WU, Y.C., JUAN, Y.H., and SU, Y.M., “Wind Field Analysis for a High-rise Residential Building Layout in Danhai, Taiwan”, The World Congress on Engineering 2013 Vol II, London, U.K., 3-5 July (2013)

191.

MAO, C., WONG, W.O. and CHENG. L., “A Modal Energy Method for Dynamic Force Identification”, The 15th Asia Pacific Vibration Conference, Jeju, Korea, 2-6 June (2013)

192.

ZHANG, H.Y. and ZHENG, G.P., “Size Effects on Mechanical Properties of Amorphous Alloys”, ISMANAM, Turino, Italy (2013)

193.

GUYADER, J.L., MAXIT, L. and CHENG, L., “Modelling Vibro-acoustic Behaviour of Micro-perforated Structures Using Patch Transfer Function Approach”, Acoustics 2012, J. Acoust. Soc. Am., Hong Kong, 13-18 May, Vol. 131, No. 4, pp.3421 (2012).

194.

TANG, S.K. and CHENG, L., “Author’s Sharing on Handling Reviewers’ Comments”, Acoustics 2012, J. Acoust. Soc. Am., Hong Kong, 13-18 May, Vol. 131, No. 4, pp.3432 (2012).

195.

XIANG, N. and CHENG, L., “Discussions on Pulishing Excellence in the Journal of the Acoustical Society of America”, Acoustics 2012, J. Acoust. Soc. Am., Hong Kong, 13-18 May, Vol. 131, No. 4, pp.3432 (2012).

196.

YANG, C., PAN, J., CHENG, L., “Performance Analysis of the Wave Trapping Barrier”, Proceedings of Acoustics, Fremantle, Australia, 21-23 November  (2012).

197.

YU, X., MAXIT, L., GUYADER, J.L. and CHENG, L., “Micro-perforated Elements in Complex Vibroacoustic Environment: Modelling and Applications”, 164th meeting of Acoust. Soc. Am., Kansas City, USA, 22-26 October (2012).

198.

WONG, K.I., WONG, P.K. and CHEUNG, C.S., “Modelling and Prediction of Diesel Vehicle Engine Performance Using Relevance Vector Machine”, International Conference on Applied Energy, Suzhou China, Paper No. A10245 (CDROM) (2012).

199.

CHAN, H.Y.H., CHOY, Y.S. and LEUNG, R.C.K., “Design of Compartmental Silencer for HVAC System,” Proceedings of Acoustics 2012 Hong Kong, Hong Kong, Paper No. 1aEA6 (2012).

200.

LIU, Y., CHOY, Y.S., HUANG, L. and CHENG, L., “Noise Control by Tensioned Membrane Housing”, Inter-noise 2012, New York, USA, 19-22 August (2012).

201.

LIU, Y., CHOY, Y.S., CHENG, L. and HUANG, L., “Noise Suppression of a Dipole Source by Tensioned Membrane Housing”, 41st International Congress and Exposition on Noise Control Engineering, Inter-Noise 2012, New York, USA, 19-22 August (2012).

202.

WANG, X.N., CHOY, Y.S. and CHENG, L., “Hybrid Noise Control in Duct by Using Micro-perforated Plate”, 41st International Congress and Exposition on Noise Control Engineering, Inter-Noise 2012, New York, USA , 19-22 August (2012).

203.

WANG, X.N., CHOY, Y.S. and CHENG, L., “Hybrid Silencer by Using Micro-perforated Plate with Side-branch Cavities”, 164th Meeting of Acoust. Soc. Am., Kansas City, USA, 22-26 October (2012).

204.

CHAN, W.L. and FU, M.W., “Microheading Process: Deformation and Realization”, Proceedings of the International Conference on Micromanufacturing, Northwestern University, USA, 12-14 March (2012).

205.

FU, M.W., “Micro-scaled Plastic Deformation: Size Effect, Deformation Behavior, Process, Tooling and the Realization”, 5th Asian Workshop on Micro/Nano Forming Technology, Harbin, China, 24-25 August (2012).

206.

FU, M.W., “The Microforming Processes for Microparts Development of Sheet and Bulk Metals” ,The First Int Conf on Metallic Materials and Processing, Gold Coast, Queensland, Australia, 8-11 July (Keynote Presentation) (2012).

207.

WANG, J.L. and FU, M.W., “Flow-induced Defect Formation and Avoidance in Meso-scaled Plastic Deformation”, Proceedings of the 3rd International Conference on New Forming Technology, Harbin, China, 26-28 August (2012).

208.

FUNG, E.H.K., HOU, N.J., ZHU, M. and WONG, W.O., “A Novel Integrated Sensing System (ISS) for Monitoring Motion Errors of a Precision Linear Slide”, Proceedings of the 2012 ASME International Mechanical Engineering Congress and Exposition, Houston, TX, U.S.A., Paper No. IMECE2012-86013 (2012).

209.

FUNG, E.H.K., WANG, Y. and WONG, Y.K., “Adaptive Neural-Fuzzy Controller (ANFC) Based Energy Management System for Battery/Ultracapacitor Electric Vehicle”, Proceedings of the 2012 ASME International Mechanical Engineering Congress and Exposition, Houston, TX, U.S.A., Paper No. IMECE2012-85929 (2012).

210.

LUK, A.M.Y., FUNG, E.H.K. and GAN, W.C., “2-DOF Planar Motion Control System Using Model Reference Adaptive Control (MRAC) Algorithm”, Proceedings of the 2012 ASME International Mechanical Engineering Congress and Exposition, Houston, TX, U.S.A., Paper No. IMECE2012-86089 (2012).

211.

YU, H.F., FUNG, E.H.K. and JING, X.J., “Optimization of Gait Trajectory of Bipedal Walking on Inclined Plane with Pitch and Roll Using Genetic Algorithm”, Proceedings of the 2012 ASME International Mechanical Engineering Congress and Exposition, Houston, TX, U.S.A., Paper No. IMECE2012-85998 (2012).

212.

JING, X.J. and CHENG, L., “Nonlinear Systems: Analysis, Design and Applications in Vibration Control”, 2nd International Conference on Advanced Design and Manufacturing Engineering (ADME 2012), Taiyuan, China, 16-18 August (Keynote) (2012).

213.

VILASINI, P.P.G.N., GAMAGE, J.R., KAHANGAMAGE, U.P., and THIBBUTUWAWA, N., “Low Productivity and Related Causative Factors: A Study Based on Sri Lankan Manufacturing Organisations”, 3rd International EPPM Conference, Brighton, UK, September (2012).

214.

KABIR, M.M., WANG, H., LAU, K.T., CARDONA, T. and ARAVINTHAN, T., “Compressive Properties of Chemically-treated Hemp Fibre Reinforced Composites”, Composites Australia Conference: Diversity in Composites, Sydney, Australia, 15-17 March (2012).

215.

LEUNG, C.W., CHEUNG, C.S., CHOY, Y.S. and ZHEN, H.S., “A New Domestic/ Commercial Energy Source - Hydrogen Enriched LPG Fuel”, Advanced Technology in Energy Systems for a Quality Environment, IMechE, Hong Kong, 21 March (2012).

216.

TSE, H., LEUNG, C.W. and CHEUNG, C.S., “Engine Performance and Emissions of Diesel-biodiesel-ethanol (DBE) Blend Fuelled Engine”, International Conference on Applied Energy, Suzhou China, Paper No. A10789 (CDROM) (2012).

217.

HUNG, W.T., LAM, Y.K., LEUNG, R.C.K. and NG, C.F., “What is a Better Metric-Road or Air Temperature - in Assessing Temperature Effects on Tyre/Road Noise?”, Proceedings of Acoustics 2012 Hong Kong, Hong Kong, Paper No. 1aNSc6 (2012).

218.

HUNG, W.T., LAM, Y.K., LEUNG, R.C.K. and NG, C.F., “Impacts of Tyre Properties on Tyre/Road Noise”, Proceedings of the 5th Cross-Strait Many Cities Symposium on Acoustics, pp.139-142 (2012).

219.

LAM, G.C.Y., TANG, S.K. and LEUNG, R.C.K., “Aeroacoustics of Flow Merging at Duct Juncction”, Proceedings of Acoustics 2012 Hong Kong, Hong Kong, Paper No. 4pHT4 (2012).

220.

LAM, Y.K., LEUNG, R.C.K. and HUNG, W.T., “Impact of Microphone Vibration on Tyre/Road Noise Measurement with Close-Proximity (CPX) method”, Proceedings of the 5th Cross-Strait Many Cities Symposium on Acoustics, pp.143-144 (2012).

221.

LI, Z.B., YIU, C.K.F., LEUNG, R.C.K. and NORDHOLM, S., “Indoor Beamformer Design Using Room Simulators”, Proceedings of Acoustics 2012 Hong Kong, Hong Kong, Paper No. 2pSP12 (2012).

222.

SEID, K.H., GILKA, G., LEUNG, R.C.K. and THIELE, F., “A Comparison Study of Reduced Order Models for Aeroacoustic Applications”, Proceedings of the 18th AIAA/CEAS Aeroacoustics Conference (the 33rd AIAA Aeroacoustics Conference), Paper No. AIAA-2012-2072 (2012).

223.

SEID, K.H., LEUNG, R.C.K. and LAM, G.C.Y., “Evaluation of Barrier Performance by Direct Environmental Noise Simulation”, Proceedings of Acoustics 2012 Hong Kong, Hong Kong, Paper No. 2pNSa12 (2012).

224.

SEID, K.H., LEUNG, R.C.K. and LAM, G.C.Y., “Low-Dimensional Modeling of Sound Generation by a Flow past a Bluff Body”, Proceedings of Acoustics 2012 Hong Kong, Hong Kong, Paper No. 4aEA8 (2012).

225.

WONG, I.Y.W., LEUNG, R.C.K. and LAW, A.K.Y., “Effects of Housing Geometry on the Performance and Noise of a Two-Outlet Centrifugal Fan - A Numerical Study”, Proceedings of the International Conference on Fan Noise, Technology and Numerical Methods (FAN 2012), Senlis, France, pp.237-250 (2012).

226.

CHAN, H.Y.H., LEUNG, R.C.K. and CHOY, Y.S., “Acoustic Generation of Flow Past an In-Duct Baffle”, Proceedings of Acoustics 2012 Hong Kong, Hong Kong, Paper No. 2pNSa10 (2012).

227.

LIU, Y., “Stochastic Resonance in Breathing”, ICTAM 2012, Beijing, China, 19-24 August (2012).

228.

LIU, Y., “The Mechanism of Activation of Mechanoreceptors in Upper Airway”, World Congress 2012 in Medical Physics and Biomedical Engineering, Beijing, China (2012).

229.

LIU, Y., YE, J.Y., LIU, Z.G., HUANG, L.X., LUO, H.Y. and LI, Y.R., “The Quantification of Breathing Quality to Predict the Outcome of OSA Surgery”, 18th Congress of the European Society of Biomechanics (ESB2012), Lisbon, Portugal, 1-4 July (2012).

230.

LIU, Z.G., LIU, Y. and LU, J., “The Simulation of Fluid-Structure Interaction on Two Flexible Cylinders Subjected to an Annular Flow”, ICTAM 2012, Beijing, China, 19-24 August (2012). 

231.

LIU, Z.G., LIU, Y. and LU, J., “The Fluid-structure Interaction Simulation on a Cylinder Subjected to an Annular Flow”, The 16th Annual Conference of HKSTAM 2012, Hong Kong, 17 March (2012).

232.

LU, M.Z., LIU, Y. and YE, J.Y., “Turbulent Flow Pattern in Upper Airway with Obstructed Sleep Apnea”, 15th International Symposium on Flow Visualization, Minsk, Belarus, 25-28 June (2012).

233.

YAN, W.W., LIU, Y., FU, B.M., XU, Y.S. and SU, Z.D., “Adhesive Dynamics Model for Cancel Cells Adhesion in Curved Post-Capillary Venules”, 18th Congress of the European Society of Biomechanics (ESB2012), Lisbon, Portugal, 1-4 July (2012).

234.

CHEUNG, K.P., SHI, S.Q. and LU, J., “Studies on Mechanical Properties of 2024 Al Sheet Treated by SMAT and Hot/Cold Rolling”, TMS 2012 Annual Meeting, Orlando, USA, 10-15 March (2012).

235.

LUO, J.L., LU, B. and SHI, S.Q., “Hydrogen Induced Passivity Degradation and Stress Corrosion Cracking”, PRiME 2012, Honolulu, Hawaii, USA, 7-12 October (2012).

236.

SHI, S.Q., “Twin/Fault Structures and Their Effect on Mechanical Properties of Nanostructured Copper”, The 3rd International Symposium on Materials for Enabling Nanodevices, UCLA, Los Angeles, USA, 27-29 August (2012).

237.

SHI, S.Q., “Modeling of Hydride Formation and Fracture in Zirconium”, TMS 2012 Annual Meeting, Orlando, USA, 10-15 March (2012).

238.

YE, L., SU, Z. and LU, Y., “Artificial Intelligence for Damage Assessment in Structures Using Digital Damage Fingerprints Extracted from Guided Wave Signals”, in Proceedings of the 5th International Conference from Scientific Computing to Computational Engineering (5th IC-SCCE), Athens, Greece, 4-7 July (2012).

239.

CHEN, J., SU, Z. and CHENG, L., “Coupling Effect on Propagation of Guided Waves in Engineering Structures and Human Bone Structures”, in Proceedings of the 2012 World Congress on Advances in Civil, Environmental, and Materials Research (ACEM’12) & the 2012 International Conference on Advances in Coupled Systems Mechanics  (ACSM’12), ISBN: 978-89-89693-34-5, pp.312-322, Seoul, Republic of Korea, 26-29 August (2012).

240.

HONG, M., ZHOU, C., SU, Z. and CHENG, L., “Nonlinear Properties of Lamb Waves under Modulation of Fatigue Damage: Finite Element Simulation with Experimental Validation”, in Proceedings of the 4th Asia-Pacific Workshop on Structural Health Monitoring Conference (SHM 2012), Melbourne, Australia, 5-7 December (2012).

241.

SU, Z., ZHOU, C., CHENG, L. and HONG, M., “Imaging-based Quantitative Characterization of Fatigue Crack for Structural Integrity Monitoring Using Nonlinear Acousto-ultrasonics and Active Sensor Networks”, in The Journal of the Acoustical Society of America, 132(3):1933, Proceedings of the 164th Meeting of the Acoustical Society of America, Kansas City, MO., USA, 22-26 October (2012).

242.

WANG, Q., SU, Z. and CHENG, L., “Integrated Damage Inspection System for Engineering Structure Using an Active Sensing Network: Development and Validation”, in Proceedings of the 1st International Conference on Mechatronic System and Measurement Technology (ICMSMT), ISBN: 978-1-933100-43-2, pp.38-42, Nanjing, P.R. China, 16-18 August (Keynote Paper) (2012).

243.

WANG, Q., SU, Z. and CHENG, L, “Development, Validation and Application of a Structural Health Diagnosis Technique Using an Active Sensing Network”, in Structural Health Monitoring 2012 - Proceedings of the 6th European Workshop on Structural Health Monitoring (EWSHM-6), Germany, 3-6 July, ISBN: 978-3-940283-41-2, pp.359-366 (2012).

244.

ZHOU, C., HONG, M., SU, Z., WANG, Q. and CHENG, L., “On Quantitative Evaluation of Fatigue Cracks: An Active Way Using Nonlinear Acousto-ultrasonic Waves”, in Structural Health Monitoring 2012 - Proceedings of the 6th European Workshop on Structural Health Monitoring (EWSHM-6), Germany, 3-6 July, ISBN: 978-3-940283-41-2, pp.99-106 (2012).

245.

BONDER, A., IVANOV, M.S., CHEN, Y.S., WEN, C.Y., LIANG, S.M. and SALDIVAR MASSIMI, H., “Kinetic and continuum Computations of Nonequilibrium Flows about Sharp Leading Edges”, Proceedings of 28th International Symposium on Rarefied Gas Dynamics (RGD28), Zaragoza, Spain, 9-13 July (2012).

246.

WEN, C.Y., SALDIVAR MASSIMI, H., CHEN, Y.S., IVANOV, M.S. and BONDER, A., “Numerical Simulations of Nonequilibrium Flows Over Rounded Models at Reentry Speeds”, 18th AIAA/3AF International Space Planes and Hypersonic Systems and Technologies Conference, Tours, France, 24-28 September (2012).

247.

CHAN, J. and WONG, E.T.T., “Empirical Modelling of Received Signal Strength in Indoor Localization”, Proc. of ACAI 2012: International Conference on Automatic Control and Artificial Intelligence, Xiamen, China, 24-26 March, pp.4339-4342 (2012).

248.

WONG, T.T. and TONG, S., “An Airworthiness SHELL Model for Aircraft Maintenance”, Proc. of 2012 IEEE International Conference on Industrial Engineering and Engineering Management, Hong Kong, 10-13 December, pp.1292-1296 (2012).

249.

YAO, H., “Size-dependent Heterogeneity Benefits the Mechanical Performance of Bone”, The 1st Mainland-Hong Kong Youth Forum on Mechanics, Hong Kong, 17 March (2012).

250.

LIU, X., LI, Y., ZHANG, Y., LI, J.S., ZHANG, J., HAN, Y.X. and HU, J.Y., “The Biocompatibility of Electrospun Wool Polypeptide/PLLA Composite Nanofibers on Saos-2 Osteoblasts”, Textile Bioengineering and Informatics Symposium Proceedings, pp.66-72 (2012).

251.

ZHAO, Z., ZHANG, Y., CHEN, A.Z., LI, Y., LIU, X., LI, J.S. and ZHENG, Z.J., “Preparation and Characterization of Paclitaxel Loaded PLLA-PEG-PLLA Nanoparticles for Control Release of Anticancer Drugs Using Solution-Enhanced Dispersion in Supercritical CO2”, Symposium on Innovative Polymers for Controlled Delivery, Special Issue of Journal of Controlled Release (2012).

252.

ZHAO, Z., LI, Y., ZHANG, Y., CHEN, A.Z., LI, J.S., LIU, X., HU, J.Y. and ZHENG, Z.J., “Experimental Investigation on Controlling Size of Silk Fibroin Nanoparticles in Supercritical CO2 Process”, Textile Bioengineering and Informatics Symposium Proceedings, pp.210-220 (2012).

253.

ZHAO, Z., CHEN, A.Z., LI, Y., HU, J.Y., LIU, X., LI, J.S., ZHANG, Y., LI, G. and ZHENG, Z.J., “Formation of Silk Fibroin Nanoparticles for Controlled Drug Delivery Using Supercritical CO2 Technique”, 4th International Conference on Drug Discovery and Therapy, Dubai, UAE, 12-15 February (2012).

254.

ZHANG, H.Y. and ZHENG, G.P., “Shear Banding in BMG Composites”, ISMANAM, Moscow, June (2012).

255.

LU, Y., LU, M., YE, L., WANG, D., ZHOU, L.M. and SU, Z., “Lamb Wave Based Monitoring of Fatigue Crack Growth Using Principal Component Analysis”, in Proceedings of the 4th Asia-Pacific Workshop on Structural Health Monitoring Conference (SHM 2012), Melbourne, Australia, 5-7 December (2012).

256.

ALAM, M.M., ZHOU, Y., ZHANG, P., “Cylinder Vibration Resulting from Switching of Shear Layer Separated from an Upstream Cylinder”, Proceedings of 18th Australasian Fluid Mechanics Conference, Launceston, Australia, 3-7 December, Paper No. 75 (2012).

257.

WANG, X.W., PIN, Y.F. and ZHOU, Y., “Representative Flow Structure Behind an Ahmed Vehicle Model”,  Proceedings of the 23rd International Congress of Theoretical and Applied Mechanics (ICTAM2012), Beijing, 19-24 August, CD-ROM (IDFM14-042) (2012).

258.

ZHANG, P., ZHOU, Y. and ALAM, M.M., “Active Control of a Round Jet Using Two Unsteady Microjets”, Proceedings of 18th Australasian Fluid Mechanics Conference, Launceston, Australia, 3-7 December, Paper No. 53 (2012).

259.

ZHANG, P., ZHOU, Y. and ALAM, M.M., “Jet Control Using Unsteady Radial Microjets”, Joint ERCOFTAC-PLASMAERO Workshop, Toulouse, France, 10-12 December, Paper No. 5-6 (2012).

260.

ZHOU, T., CAO, H., ZHOU, Y., HAO, Z., and CHENG, L., “Phase-average Analysis of Three-dimensional Vorticity and Temperature Dissipation Rate in the Near Field of a Heated Circular Cylinder Wake”, Proceedings of 18th Australasian Fluid Mechanics Conference, Launceston, Australia, 3-7 December, Paper No. 230 (2012).

261.

WANG, X.W., ZHOU, Y., PIN, Y.F. and CHAN, T.L., “Three-dimensional Flow Structure behind an Ahmed Vehicle Model”, Proceedings of The 9th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2012), Malta, 16-18 July, Paper No. (CDROM) (2012).

262.

CHENG, L., “Adaptive Structures for Flow-structure-noise Control” (Keynote), International Conference on Mechatronics and Materials Processing (ICMMP2011), Guangzhou, 18-20 November (2011).

263.

CHENG, L., “Control of Flow-induced Vibration and Noise” (Keynote), IEEE Second International Conference on Mechanic Automation and Control Engineering (MACE2011), Hohhot, 15-17 July (2011).

264.

YANG, C. and CHENG, L., “Sound Absorption of a Baffled Cavity-backed Micro-perforated Panel Absorber under Oblique and Diffused Incidence”, 14th Asia Pacific Vibration Conference, Hong Kong, 5-8 December, pp.738-745 (2011).

265.

YANG, C., LI, D.Y. and CHENG, L., “Dynamic Vibration Absorbers for Vibration Control within a Frequency Band”, 14th Asia Pacific Vibration Conference, Hong Kong, 5-8 December, pp.1790-1799 (2011).

266.

LU, Z.B., HALIM, D. and CHENG, L., “Closed-loop Control of Vortex-induced Acoustic Resonance inside a Downstream Cavity through PZT Driven Surface Perturbation”, 5th ECCOMAS Thematic Conference on Smart Structures and Materials (SMART’11), Saarbrucken, Germany, 6-8 July (2011).

267.

LI, D.Y. and CHENG, L., “Enhanced Noise Isolation through Double-panel Partitions Using Integrated Acoustic Resonator Array”, Forum Acousticum 2011, Aalborg, Denmark, 27 June-1 July (2011).

268.

XU, H., CHENG, L. and SU, Z., “Development of a Noise Reduction Approach for Vibration-based Damage Detection Involving High-order Derivatives”, Dynamics for Sustainable Engineering - Proceedings of the 14th Asia Pacific Vibration Conference (APVC2011), Hong Kong: The Hong Kong Polytechnic University, 5-8 December, ISBN: 978-962-367-731-8, pp.363-372 (2011).

269.

XU, H., CHENG, L. and SU, Z., “Characterizing Damage in Plate Structures Based on Local Perturbance to Dynamic Equilibrium”, Structural Health Monitoring 2011: Condition-based Maintenance and Intelligent Structures - Proceedings of the 8th International Workshop on Structural Health Monitoring (IWSHM-8), Stanford, CA., USA, 13-15 September, ISBN: 978-1-60595-053-2, pp.95-102 (2011).

270.

WANG, X.N., CHOY, Y.S. and CHENG, L., “Hybrid Passive Noise Control on a Plate Silencer with Micro-Perforations”, 14th Asia Pacific Vibration Conference, Hong Kong, 5-8 December, pp.795-802 (2011).

271.

WANG, C., HUANG, L. and CHOY, Y.S., “Design of a Novel Duct Silencer Using Finite Element Method”, Comsol Multiphysics, China, 3 March (2011).

272.

CHOY, Y.S., LIU, Y. and LAU. K. T., “Duct Noise Control by Using Very Light Composite Plate”, The 20th International Symposium on processing and fabrication of Advanced Materials (PFAM), Hong Kong, 15-17 December (2011).

273.

FU, M.W., CHAN, W.L. and YANG, B., “Study of Size Effects on Material Deformation Behaviour in Micro-deep Drawing of Copper Sheet Metal”, International Conference on Technology of Plasticity, Aachen, Germany, 25-30 September (2011).

274.

CHAN, W.L. and FU, M.W., “Integrated Product and Process Design for Micro-product Development via Microforming”, International Conference on Innovative Methods in Product Design, Venice, Italy, 15-17 June (2011).

275.

FU, M.W., CHAN, W.L. and YANG, B., “Experimental and Numerical Studies on the Material Deformation Behavior in Micro-extrusion Process”, Proceedings of the International Conference on Micromanufacturing, Tokyo, 7-20 March (2011).

276.

FUNG, E.H.K., YU, H.F., SUEN, K.H. and LEUNG, A.T., “Anti-Swing Trajectory Control of Overhead Crane”, Proceedings of the 2011 ASME International Mechanical Engineering Congress and Exposition, Denver, CO, U.S.A., 11-17 November (Paper No. IMECE2011-63527) (2011).

 

277.

FUNG, E.H.K., HOU, N.J., ZHU, M. and WONG, W.O., “A Novel Integrated Sensing System for Monitoring CMM Motion Errors”, the 2011 ASME International Mechanical Engineering Congress and Exposition, Denver, CO, U.S.A., 11-17 November (Paper No. IMECE2011-66232) (2011).

278.

JING, X.J., ANGARITA, N., SIMPSON, D.M., ALLEN, R. and NEWLAND, P.L., “A Learning Approach to Identification of Nonlinear Physiological Systems Using Wiener Models”, Processing Biosignals 2011 International Conference on Bio-inspired Systems and Signal Processing, Springer, 26-29 January, pp.472-476 (2011).

279.

JING, X.J., NING, H.W. and CHENG, L., “Estimation and Characterization of Nonlinear Behavior of Nonlinear Spatio-Temporal Systems”, 7th European Nonlinear Dynamics Conference (ENOC 2011), Rome, ITALY, 24-29 July (2011).

280.

CHEN, Y., JING, X.J. and CHENG, L., “Investigation of a Nonlinear Vehicle Suspension System Using Frequency Domain Analysis Method”, 14th Asia Pacific Vibration Conference, Hong Kong, Hong Kong Polytechnic University, 5-8 December, pp.473-481 (2011).

281.

ZHU, X.C., JING, X.J. and CHENG, L., “Efficient Design of a Magneto-Rheological Fluid Embedded Pneumatic Vibration Isolator Considering Practical Constraints”, 14th Asia Pacific Vibration Conference, Hong Kong, Hong Kong Polytechnic University, 5-8 December 2011, pp.1195-1204 (2011).

282.

VILASINI, N., KAHANGAMAGE, U.P., GAMAGE, J. and KOSALA, W.V.R., “The Impact of Work Design Concept on Manufacturing Performance: A Process Sector Case Study”, IEEM 2011, The IEEE International Conference on Industrial Engineering and Engineering Management, Singapore (2011).

283.

HO, M.P., LAU, K.T. and WANG, H., “Effect of Degumming on Tussah silk Fibre”, Proceeding of the 19th International Conference on Composite Materials, Korea, Jeju Island, 21-26 August, pp.M13-6-AF2055 (2011).

284.

HO, M.P., LAU, K.T., WANG, H. and BHATTACHARYYA, D., “Mechanical Properties of an Injected Silk Fibre Reinforced PLA Composite”, Processing and Fabrication of Advanced Materials XIX, Hong Kong, 14-17 January, pp.885-894 (2011).

285.

LAU, M.L., LAU, K.T., YAO, Y.D. and BAHATTACHARYYA, D., “A Study on Bone Properties Using Nanoindentation Technique”, Processing and Fabrication of Advanced Materials XIX (PFAM-19), Hong Kong, 14-17 January (2011).

286.

KABIR, M.M., WANG, H., ARAVINTHAN, T., CARDONA, F. and LAU, K.T., “Effects of Natural Fibre Surface on Composite Properties: A Review”, eddBE2011 procedings, Energy, environment and sustainability, Queensland University of Technology, Brisbane, 27-29 April, pp.94-99 (2011).

287.

LEE, C.L. and LEUNG, C.W., “Prediction of Nitrogen Oxides Emissions of Tangentially Coal-fired Boilers”, 22nd Boilers and Pressure Vessels Safety Seminar, Hong Kong, 9 November (2011).

288.

HUNG, W.T., LAM, Y.K., NG, C.F., LEUNG, R.C.K., HO, K.Y. and FUNG, E., “Certifying a Twin-Wheeler CPX Vehicle for Tyre/Road Noise Measurement”, Imaizumi H., ed., Inter-Noise 2011, International Institute of Noise Control Engineering (I-INCE), Osaka, Japan, 4-7 September Paper No. 425757 (2011).

289.

YANG, L.J. and LEUNG, W.W.F., “Improvement of Dye Sensitized Solar cells with nanofiber-based anode”, ASME-International Mechanical Engineering Congress and Exposition, IMECE-64710, Denver, Colorado, USA, 11-17 November (2011).

290.

REN, Y. and LEUNG, W.W.F., “Numerical Modeling and Experimental Investigation of Improved Mixing from both Coriolis Effect and Görtler Vortices in Rotating Zigzag Microchannel”, ASME-International Mechanical Engineering Congress and Exposition, IMECE-64712, Denver, Colorado, USA, 11-17 November (2011).

291.

PEI, C. and LEUNG, W.W.F., “Photocatalytic degradation of Rhodamine B by TiO2/ZnO nanofibers under visible light irradiation”, ASME-International Mechanical Engineering Congress and Exposition, IMECE-64695, Denver, Colorado, USA, 11-17 November (2011).

292.

YANG, L.J. and LEUNG, W.W.F., “Improvement of Dye Sensitized Solar Cells with Titanium Nanofiber Photoanode”, Material Research Society, Fall 2011, Boston, MA, USA (2011).

293.

LEUNG, W.W.F., “A new approach on analyzing drill mud classification by centrifugation”, American Filtration and Separations Society Fall Meeting, Houston, TX, USA, 18-20 October (2011).

294.

LEUNG, W.W.F., “Nanofiber filter for energy-saving indoor air quality”, American Filtration and Separations Society Fall Meeting, Houston, TX, USA, 18-20 October (2011).

295.

LIU, Y., YE, J.Y., LIU, Y.X. and LUO, H.Y., “Flow Analysis in Upper Airway for an OSA Subject Before and After Surgery”, Proceedings of the ASME 2011 Summer Bioengineering Conference, Nemacolin Woodlands Resort, Famington, Pennsylvania, USA, 22-25 June (SBC2011-53340) (2011).

296.

YAN, W.W., LIU, Y. and FU, B.M., “Mechanical Mechanism of Circadian Fluctuations Regulated Haematopoietic Stems Cell Release”, Proceedings of the ASME 2011 Summer Bioengineering Conference, Nemacolin Woodlands Resort, Famington, Pennsylvania, USA, 22-25 June (SBC2011-53377) (2011).

297.

YAN, W.W., LIU, Y. and FU, B.M., “Effect of Gradient of Wall Shear Stress Distribution on Cell Adhesion in Micro-circulation”, The fourth international symposium on Physics of Fluids, Lijiang, China, 13-16 June (2011).

298.

SU, W.W., YAN, W.W., LIU, Y. and XU, Y.S., “Lattice Boltzmann Simulation on Advective Flow through Porous Anode in a 2-D MFC”, The fourth international symposium on Physics of Fluids, Lijiang, China, 13-16 June (2011). 

299.

YAN, W.W., LIU, Y. and FU, B.M., “Effects of Divalent Cations on Cell Adhesion between Human Neutrophil and Endothelial Ligand VCAM-1: A Lattice Boltzmann Analysis”, International Conference on Computational Science, Singapore, 01-03 June Procedia Computer Science, Vol. 4, pp.1039-1047 (2011).

300.

YAN, W.W., LIU, Y. and FU, B.M., “Effect of Wall Shear Stress Variation on Tumour Cell Adhesion”, The 15th Annual Conference of Hong Kong Society of Theoretical and Applied Mechanics, Hong Kong, March (2011).

301.

LIU, Z.G., LIU, Y. and LU, J., “Simulation of Fluid-Structure Interaction for an Elastic Cylinder in an Axial Flow”, 6th International Conference on Fluid Structure Interaction, Orlando, USA, 9-11 May (2011).

302.

SHI, S.Q., “Deformation Twin Induced by Multi-strain in Nanocrystalline and Hierarchy Twin/Fault Structure in Copper:Molecular Dynamic Simulation”, Third International Symposium on Computational Mechanics (ISCM III) in conjunction with Second Symposium on Computational Structural Engineering (CSE II), Taipei, Taiwan, 5-7 December (2011).

303.

SHI, S.Q., “Deformation Twin Induced by Multi-strain in Nanocrystalline and Hierarchy Twin/Fault Structure in Copper”, Hong Kong – Mainland Symposium on Nanomechanics, Hong Kong, China, 24 November (2011).

304.

CHEN, K.G., SHI, S.Q. and LU, J., “Deformation Twin in Nanocrystalline Copper: Molecular Dynamic Simulation”, China Mechanics 2011, Ha Er Bin, China, 22-24 August (2011).

305.

CHEN, K.G., SHI, S.Q. and LU, J., “Multi-strain Induced Deformation Twinning in Nanocrystalline Copper”, 1st World Congress on Integrated Computational MaterialsEngineering, Seven Springs, Pennsylvania, USA, 10-14 July (2011).

306.

SHI, S.Q., “Phase Field Model for Time-dependent Hydrogen Diffusion, Hydride Formation and Fracture Initiation in Zirconium”, 1st World Congress on Integrated Computational Materials Engineering, Seven Springs, Pennsylvania, USA, 10-14 July (2011).

307.

ZHANG, X.C., LU, J. and SHI, S.Q., “Numerical Evaluation of Energy Transfer during Surface Mechanical Attrition Treatment”, 1st World Congress on Integrated Computational Materials Engineering, Seven Springs, Pennsylvania, USA, 10-14 July 2011.

308.

SHI, S.Q., “Modeling of Hydrogen Damage in Materials Using Phase-field Method”, International Conference on the Mechanical Behavior of Materials, Lake Como, Italy, 5-9 June (2011).

309.

SHI, S.Q., “Modeling of Hydrogen Diffusion, Hydride Blister Formation and Fracture in Zirconium”, International Conference on Computational & Experimental Engineering and Sciences (ICCES’11), Nanjing, China, 18-21 April (2011).

310.

CHEUNG, K.P., CHEN, A.Y., NG, C., SHI, S.Q. and LU, J., “Residual Stress Distribution of Friction Stir Welded 2024 Al Thin Sheet Treated by SMAT”, the 15th Annual Conference of HKSTAM, the 7th Jiangsu-Hong Kong Forum on Mechanics and It’s Application, and the 2nd Symposium on the Development of Mechanics in Macau, Hong Kong & Macau, China, 11-12 March (2011).

311.

XIAO, Z.H.,SHI,  S.Q., WOO, C.H. and SEMENOV, A.A., “Phase Field Simulation of Void Growth in Metal”, the 15th Annual Conference of HKSTAM, the 7th Jiangsu-Hong Kong Forum on Mechanics and It’s Application, and the 2nd Symposium on the Development of Mechanics in Macau, Hong Kong & Macau, China, 11-12 March, 2011.

312.

WANG, J.C., SHI, S.Q., LEUNG, C.W. and CHAN, P.K.L., “Short Circuit Current Improvement in Planar Heterojunction Organic Solar Cells by Multijunction Charge Transfer”, MRS Fall 2011, Boston, MA (2011).

313.

YU, L., SU, Z. and LIU, X., “The Definition and Measurement of the Probability Density Function in Lamb Wave Damage Detection Based on Data Fusion”, Dynamics for Sustainable Engineering - Proceedings of the 14th Asia Pacific Vibration Conference (APVC2011), Hong Kong: The Hong Kong Polytechnic University, 5-8 December, ISBN: 978-962-367-731-8, pp.357-362  (2011).

314.

HUANG, Q., XU, Y., LI, J., LIU, H. and SU, Z., “Use Semi-active Friction Dampers for Damage Detection of a Building Complex”, Proceedings of the 12th East Asia-Pacific Conference on Structural Engineering and Construction (EASEC-12), Hong Kong, 26-28 January (2011).

315.

ZHOU, C., SU, Z. and CHENG, L., “Detecting Fatigue Cracks Using Nonlinear Characteristics of Acousto-ultrasonic Lamb Waves”, Proceedings of the 2011 World Congress on Advances in Structural Engineering and Mechanics (ASEM’11+) & the 2011 International Conference on Smart Structures and Systems (ICOSSS’11), Seoul, Republic of Korea, 18-22 September, ISBN: 978-89-89693-32-1, pp.3576-3584 (2011).

316.

ZHOU, C., SU, Z. and CHENG, L., “Characterising Fatigue Crack in an Aluminium Plate Using Guided Elastic Waves”, Proceedings of the SPIE (Vol. 7981, Proceedings of SPIE Conference on Smart Structures/NDE (Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2011)), San Diego, CA., USA, 6-10 March, pp.798134-1-7, DOI: 10.1117/12.879894 (2011).

317.

WANG, Q., SU, Z., CHENG, L. and ZHOU, C., “Detection of Fatigue Cracks in Train Structures Using Nonlinear Lamb Waves”, Proceedings of the 1st International Workshop on High-speed and Intercity Railways (IWHIR-2011), Hong Kong, 19-22 July, ISBN: 978-3-642-27959-1, pp.267-277 (2011).

318.

HU, X.X. and WONG, E.T.T., “A Numerical Study on Rear-spoiler of Passenger Vehicle”,   International Conference on Mechanical and Industrial Engineering, Singapore, 28-30 September, Vol. 81, pp.636-641 (2011).

319.

WONG, W.O., CHEUNG, Y.L. and CHENG, L., “Modal Power Flow Analysis of a Damaged Composite Plate”, The 14th Asia Pacific Vibration Conference, Hong Kong, 5-8 December, pp.872-880 (2011).

320.

CHEUNG, Y.L., WONG, W.O. and CHENG, L., “Minimization of Impulse Response Using Hybrid Dynamic Vibration Absorber”, 14th Asia Pacific Vibration Conference, Hong Kong, 5-8 December, pp.650-659 (2011).

321.

LU, M., LU, X., ZHOU, L.M., SU, Z., YE, L. and LI, F., “Fatigue Crack Detection Using Guided Waves and Probability-based Imaging Approach”, Structural Health Monitoring 2011: Condition-based Maintenance and Intelligent Structures - Proceedings of the 8th International Workshop on Structural Health Monitoring (IWSHM-8), Stanford, CA., USA, 13-15 September, ISBN: 978-1-60595-053-2, pp.282-289 (2011).

322.

LU, M., QU, Y., LU, Y., YE, L., ZHOU, L.M. and SU, Z., “Monitoring of Surface-Fatigue Crack Propagation in a Welded Steel Angle Structure Using Guided Waves and Principal Component Analysis”, Proceedings of the 3rd International Conference on Smart Materials and Nanotechnology in Engineering (SMN2011), Shenzhen, P.R. China, 5-8 December (2011).

323.

LU, M., WANG, D., ZHOU, L.M., SU, Z., CHENG, L. and YE, L., “Monitoring of Fatigue Crack Propagation of Engineering Structures Using Time Reversal Method”, Proceedings of the 18th International Conference on Composite Materials (ICCM-18), Jeju, Republic of Korea, 21-26 August (2011).

324.

LU, X., LU, M., ZHOU, L.M., SU, Z., CHENG, L., YE, L. and MENG, G., “Guided Wave and Probability Based Diagnostic Imaging for Detection of Multiple Welding Damages in Welded Tubular Steel Structures”, Structural Health Monitoring 2011: Condition-based Maintenance and Intelligent Structures - Proceedings of the 8th International Workshop on Structural Health Monitoring (IWSHM-8), Stanford, CA., USA, 13-15, September, ISBN: 978-1-60595-053-2, pp.79-86 (2011).

325.

ZHENG, G.P., “Experimental Characterization on the Deformation Defects in Amorphous Alloys and Its Applications in the Simulation of Shear Banding”, International Conference on Computational and Experimental Engineering and Science, Nanjing (2011).

326.

ZHANG, H.Y. and ZHENG, G.P., “Simulation of Shear Banding in Porous Bulk Metallic Glasses”, BMG-VIII, Hong Kong (2011).

327.

BAI, Y., ZHENG, G.P., SHI, S.Q. and QIAO, L.J., “The Electrocaloric Effect in BaTiO3 Thick film Multilayer Structure at High Electric Field”, 7th China International Conference on High-performance Ceramics, Xiamen, China, 4-7 November (2011).

328.

ZHANG, P., DU, C., ZHOU, Y. and MI, J., “Mini-jet-controlled Turbulent Round Jet and Flame”, Proceedings of 11th International Conference on Fluid Control, Measurements, and Visualization, Keelung, Taiwan, 5-9 December, pp.129 (CDROM) (2011).

329.

ZHANG, W.G., ZHOU, Y. and BAI, H.L., “Skin Friction Drag Reduction Based on Local Small Surface Perturbation”, 1st Symposium on Fluid-Structure-Sound Interactions and Control, Yinchuan, China, 31-28 July, Keynote Speech (CDROM) (2011).

330.

 

ZHANG, P. and ZHOU, Y., “Jet Flame Control Using Steady and Pulsed Radial Mini-jets”, 7th International Conference on Computational Heat and Mass Transfer, Istanbul, Turkey, 18-22 July, pp.265 (CDROM) (2011).

331.

WANG, X.W., ZHOU, Y. and WONG, W.A., “Swirl Number Effect on the Turbulent Flow Structure in a Cylinder-on-cone Cyclone”, 4th International Conference on Experiments/Process/System Modeling/ Simulation/Optimization (4th IC-EpsMsO), Athens, Greece, 6-9 July (2011).

332.

ZHANG, P. and ZHOU, Y., “Unsteady Minijet-controlled Jet Flame”, 4th International Conference on Experiments/Process/System Modeling/ Simulation/Optimization (4th IC-EpsMsO), Athens, Greece, 6-9 July (2011).

333.

KUANG, Y.D., CHAN, K.L. and SHI S.Q., “Transversal Vibration of Single-Walled Carbon Nanotubes Containing Water”, The 2nd IASTED International Conference on Nanotechnology and Applications (NANA 2010), 1-3 November 2010, Cambridge, Massachusetts, USA.

334.

XU, H., CHENG, L., SU, Z.Q. and GUYADER, J.L., “A Novel Damage Identification Approach Based on Structural Dynamic Equilibrium”, The 3rd Asia-Pacific Workshop on Structural Health Monitoring (APWSHM), 29 November - 5 December 2010, Tokyo, Japan.

335.

XU, H., CHENG, L., SU, Z. and GUYADER, J.L., “A Novel Damage Identification Approach Based on Local Structural Dynamic Equilibrium”, The 3rd Asia-Pacific Workshop on Structural Health Monitoring (APWSHM-3), 30 November - 2 December 2010, Tokyo, Japan, pp.(3A13)-1-10.

336.

CHENG, L., “Active Control of Flow-Induced Vibration and Noise”, Symposium on Dynamical Systems and Vibration 2010, 22-28 November 2010, Yunlin, Taiwan.

337.

LI, D.Y., CHENG, L., YU, G.H. and GUYADER, J.L., “Sound Transmission through Double-Panel Partitions with Strong and Weak Coupling Analyses”, 17th International Congress on Sound and Vibration, 18-22 July 2010, Cairo, Egypt.

338.

HALIM, D., CHENG, L. and SU, Z., “Robust Virtual Sensors for Vibro-Acoustic Applications using Structural Sensing”, In Proceedings of the 39th International Congress and Exposition on Noise Control Engineering (Inter-Noise 2010), 13-16 June 2010, Lisbon, Portugal.

339.

ZHANG, S. and CHENG, L., “A Wavelet-Galerkin Framework for the Modeling of Inner Acoustic Problems”, In Proceedings of the 39th International Congress and Exposition on Noise Control Engineering (Inter-Noise 2010), 13-16 June 2010, Lisbon, Portugal.

340.

LU, Z.B., CHENG, L. and HALIM, D., “Active Control of Flow-Induced Acoustic Resonance through Surface Perturbation”, In Proceedings of the 39th International Congress and Exposition on Noise Control Engineering (Inter-Noise 2010), 13-16 June 2010, Lisbon, Portugal.

341.

YU, G.H., CHENG, L., LI, D.Y. and HAR, W., “Modeling of T-Shaped Acoustic Resonators”, In Proceedings of the 39th International Congress and Exposition on Noise Control Engineering (Inter-Noise 2010), 13-16 June 2010, Lisbon, Portugal.

342.

CHENG, L., SU, Z. and YU, L., “Evaluation of Structural Damage using Correlative Sensor Array (CSA)”, In Proceedings of the 5th European Workshop on Structural Health Monitoring (EWSHM-5), 28 June - 2 July 2010, Sorrento, Italy, ISBN: 978-1-60595-024-2, pp.444-449.

343.

CHEUNG, C.S., ZHANG, Z.H., CHAN, T.L. and YAO, C.D., “The Performance and Emissions of a Diesel Engine Operating on Diesel Fuel and Fumigation Methanol”, Proceedings of the Second International Conference on Applied Energy, 21-23 April 2010, Singapore, CDRom pp.373.

344.

TSANG, K.S., ZHANG, Z.H., CHEUNG, C.S., CHAN, T.L., and YAO, C.D., “Performance and Emissions of a Diesel Engine using Fumigation Ethanol”, Proceedings of the Second International Conference on Applied Energy, 21-23 April 2010, Singapore, CDRom pp.446.

345.

TSANG, K.S., CHEUNG, C.S. and CHAN, T.L., “Influence of Fumigation Ethanol on Diesel Engine Emissions”, International Conference on Environment 2010: Green Technologies for the Benefits of Bottom Billions (ICENV 2010), December 2010, Penang, Malaysia, pp.202.

346.

CHOY, Y.S., “Low Frequency Noise Control by Helium-Filled Duct Lining”, The 17th International Congress on Sound and Vibration, 18-22 July 2010, Cairo, Egypt.

347.

CHEUNG, H.Y., CHOY, Y.S., LAU, K.T. and WU, L., “Development of a Compact Plate Silencer for Low Frequency Noise Control”, The 7th Asian-Australasian Conference on Composite Materials, 15-18 November 2010, Taiwan.

348.

FU, M.W., CHAN, W.L. and LU, J., “Size-Effect Based Micro Fracture Behavior in Micro-Scale Plastic Deformation of Sheet Metal”, International forum of Micro Manufacturing, 2010, Gifu, Japan.

349.

WANG, K.L., FU, M.W. and LU, J., “FEM-Based Modeling of Dynamic Recrystallization of AISI 52100 Steel using Cellular Automation Method”, ICoPE2010 and 13th ICPE International Conference on Precision Engineering, 28-30 July 2010, Singapore.

350.

LI, H., FU, M.W. and LU, J., “Evaluation of the Uncoupled Ductile Fracture Criteria for Fracture Prediction in Metal Forming via Finite Element Simulation”, 8th International Conference on Fracture & Strength of Solids, 7-9 June 2010, KL, Malaysia.

351.

CHUNG, S.H. and FUNG, E.H.K., “Adaptive Sliding Mode Control of Piezoelectric Tube Actuator with Hysteresis, Creep and Coupling Effect”, The 2010 ASME International Mechanical Engineering Congress and Exposition, 2010, Vancouver, British Columbia, Canada, pp.IMECE2010-37637.

352.

FUNG, E.H.K., ZHU, M., ZHANG, X.Z. and WONG, W.O., “An Improved Fourier Eight-Sensor (F8S) Method for Separating Straightness, Yawing and Rolling Errors of a Linear Slide”, The 2010 ASME International Mechanical Engineering Congress and Exposition, 12-18 November 2010, Vancouver, British Columbia, Canada, pp.IMECE2010-37611.

353.

LAM, K., LIN, Y.F., ZOU, L. and LIU Y., “Turbulent Flow around Two Yawed Cylinders in Tandem Arrangement”, The 20th International Offshore and Polar Engineering Conference, 20-26 June 2010, Beijing, China.

354.

LAM, K., ZOU, L., LIN, Y.F. and LIU, Y., “Numerical Investigation of Three-Dimensional Flow around Wavy Rectangular Slabs”, The 4th International Conference from Scientific Computing to Computational Engineering (4th IC-SCCE), 7-10 July 2010, Athens, Greece.

355.

LAM, K., LIN, Y.F., ZOU, L. and LIU, Y., “Turbulent Flow around Two Yawed Cylinders in Tandem Arrangement”, In ISOPE, J.S. Chung et. al, ed., The 20th International Offshore and Polar Engineering Conference, 20-25 June, Beijing, China, Vol. 2; International Society of Offshore and Polar Engineers, 2010, California, USA, ISBN 978-1–880653–77-7, pp.61 – 66.

356.

LEE, C.L., LEUNG, C.W. and CHEUNG, C.S., “Prediction of Nitrogen Oxides Emissions of a Tangentially Coal-Fired Boiler”, Proceedings of the Second International Conference on Applied Energy, 2010, Singapore, CDRom pp.444.

357.

LAM, G.C.Y., TANG, S.K. and LEUNG, R.C.K., “Aeroacoustics of Low Mach Number Merging Flows at Duct Junction”, Proceedings of the 17th International Congress on Sound and Vibration, 2010, Cairo, Egypt, Paper No. 770.

358.

HUNG, W.T., NG, C.F., LEUNG, R.C.K., HO, K.Y., LAM, Y.K. and FUNG, E., “Some Observations in the “Removed-Tyre” Certification Test of a Two-Wheeler CPX Vehicle in Hong Kong”, Inter-Noise 2010, 2010, Lisbon, Portugal, Paper No. 458.

359.

YAN, W.W., LIU, Y. and FU, B.M., “Effect of Adhesive Dynamics Models on Cell Adhesion in a Straight Capillary Vessel - A LBM Study”, 4th International Conference from Scientific Computing to Computational Engineering (4th IC-SCCE), 7-10 July 2010, Athens, Greece.

360.

YAN, W.W., LIU, Y. and FU, B.M., “Effect of Shear Stress Gradient on Cell Adhesion in Curved Microvessels”, 6th World Congress of Biomechanics, 1-6 August 2010, Singapore, pp.470.

361.

LIU, Y., LIU, Y.X., LUO, H.Y. and YE, J.Y., “Effect of OSA on Flow Pattern at Larynx”, 6th World Congress of Biomechanics, 1-6 August 2010, Singapore, pp.371.

362.

YAN, W.W., LIU, Y. and FU, B.M., “Effects of Curvature and Cell-Cell Interaction on Cell Adhesion in Microvessels”, The 14th Annual Conference of HKSTAM 2009/2010 (The 7th Shanghai-Hong Kong Forum on Mechanics & Its Application), 13 March 2010, Hong Kong, pp.38.

363.

LIU, Y., CHOY, Y.S., CHENG, L. and HUANG, L., “Experimental Study on the Instability of Flow Past a Tensioned Membrane”, The 8th Euromech Fluid Mechanics Conference, September 2010, Germany.

364.

YE, J.C., LU, J. and YANG, Y., “Thickness Effect on Mechanical Properties of Zr-Bases Thin-Film Metallic Glasses Deposited on Silicon Substrate”, MRS 2010 Fall Meeting, 2010, Boston, Massachusetts, USA.

365.

WANG, J.C., REN, X.C., SHI, S.Q., LEUNG, C.W. and CHAN P.K.L., “S-Shape Properties in the J-V Curves of Bilayer Heterojunction Organic Solar Cells”, MRS 2010 Fall Meeting, 29 November - 3 December 2010, Boston, Massachusetts, USA.

366.

LIU, W.C., KUANG, Y.D. and SHI, S.Q., “Size Effects on Mechanical Properties of Single-Walled Carbon Nanotube X-Junctions”, The 2nd IASTED International Conference on Nanotechnology and Applications (NANA 2010), 1-3 November 2010, Cambridge, Massachusetts, USA.

367.

SHI, S.Q., “An Elastoplastic Phase Field Model for Microstructure Evolution”, Solid-Solid Phase Transformations in Inorganic Materials, 6-11 June 2010, Avignon, France.

368.

SHI, S.Q., “An Elastoplastic Phase Field Model for Microstructure Evolution”, Solid-Solid Phase Transformations in Inorganic Materials, 6-11 June 2010, Avignon, France.

369.

CHEN, K.G., ZHU, W.J., SHI, S.Q. and LU, J., “Microstructural Evolution of Nanocrystalline Copper under Shockwave: A Molecular Dynamics Study”, The 14th Annual Conference of Hong Kong Society of Theoretical and Applied Mechanics & The 7th Shanghai-Hong Kong Forum on Mechanics and Its Application, 13 March 2010, Hong Kong.

370.

ZHANG, X.C., SHI, S.Q. and LU, J., “Finite Element Analysis of SMAT Induced Residual Stress”, The 14th Annual Conference of Hong Kong Society of Theoretical and Applied Mechanics & The 7th Shanghai-Hong Kong Forum on Mechanics and Its Application, 13 March 2010, Hong Kong.

371.

LIU, W.C., KUANG, Y.D. and SHI, S.Q., “The Effect of Temperature on the Mechanical Properties of Carbon Nanotube Junctions”, The 14th Annual Conference of Hong Kong Society of Theoretical and Applied Mechanics & The 7th Shanghai-Hong Kong Forum on Mechanics and Its Application, 13 March 2010, Hong Kong.

372.

ZHOU, C., SU, Z.Q. and CHENG, L., “Damage Characteristics using Pulse-Echo and Pitch-Catch Active Sensor Network”, The 3rd Asia-Pacific Workshop on Structural Health Monitoring (APWSHM), 29 November - 5 December 2010, Tokyo, Japan.

373.

CHEN, J., SU, Z. and CHENG, L., “Identification of Corrosion Damage in Submerged Structures using Anti-Symmetric Lamb Wave Mode”, In Proceedings of the 5th European Workshop on Structural Health Monitoring (EWSHM-5), 28 June - 2 July 2010, Sorrento, Italy, ISBN: 978-1-60595-024-2, pp.444-449.

374.

ZHOU, C., SU, Z. and CHENG, L., “A Probability-Based Diagnostic Imaging Approach using an Active Sensor Network Based on Hybrid Pulse-Echo and Pitch-Catch Configurations”, In Proceedings of the 5th European Workshop on Structural Health Monitoring (EWSHM-5), 28 June - 2 July 2010, Sorrento, Italy, ISBN: 978-1-60595-024-2, pp.444-449.

375.

CHEN, J., SU, Z., CHENG, L. and QIN, L., “Influence of Soft Tissues on Ultrasonic Lamb Waves in Synthesised Soft Tissue-Bone Phantoms”, In IFMBE Proceedings (Vol.: 31, Proceedings of the 6th World Congress of Biomechanics (WCB 2010) in conjunction with the 14th International Conference on Biomedical Engineering (ICBME) and the 5th Asia-Pacific Conference on Biomechanics (AP Biomech-2010)), 1-6 August 2010, Singapore, ISBN: 978-3-642-14514-8, pp.1315-1318.

376.

CHEN, J., SU, Z. and CHENG, L., “Identification of Corrosion Damage in Submerged Structures using Anti-Symmetric Lamb Wave Mode”, The 5th European Workshop on Structural Health Monitoring (EWSHM-5), 28 June - 2 July 2010, Sorrento, Italy, ISBN: 978-1-60595-024-2, pp.554-559.

377.

ZHOU, C., SU, Z. and CHENG, L., “Damage Characterisation Using Pulse-Echo and Pitch-Catch Active Sensor Network”, The 3rd Asia-Pacific Workshop on Structural Health Monitoring (APWSHM-3), 30 November - 2 December 2010, Tokyo, Japan, pp.(3A17)-1-9.

378.

HUANG, Q., XU, Y., LI, J., LIU, H. and SU, Z., “Structural Damage Detection of Building Structures by Model Updating using Semi-Active Friction Dampers and Frequency Response Functions”, The 11th International Symposium on Structural Engineering (ISSE-11), 18-20 December 2010, Guangzhou, P. R. China.

379.

WONG, T.T., LEUNG, C.W. and WONG, M.C., “Sustainable Design of Impinging Premixed Slot Jets”, Proc. of ICEE 2010: International Conference on Energy and Environment, 28-30 July 2010, Paris, France, pp.550-554.

380.

LIU, X., WONG, W.O. and CHENG, L., “Damage Detection in Plate Structures using Modal Power Flow Analysis”, In Enrico Primo Tomasini, ed., 9th International Conference on Vibration Measurements by Laser and Noncontact Techniques, 22 - 25 June 2010, Ancona, Italy, Vol. 1253, AIP, American Institute of Physics, pp.150-154.

381.

WONG, W.O., GAO, Z. and LU, J., “A Simple Heterodyne Temporal Speckle-Pattern Interferometer”, 9th International Conference on Vibration Measurements by Laser and Noncontact Techniques, 22-25 June 2010, Ancona, Italy, pp.410-414.

382.

YANG, Y., “Characteristic Length Scales Governing Plasticity/Brittleness of Bulk Metallic Glass at Ambient Temperature”, The 17th International Symposium on Metastable, Amorphous and Nanostructured Materials, 4-9 July 2010, Zurich, Switzerland.

383.

YANG, Y., “Study of Microscopic Deformation Behaviors of Bulk Metallic-Glasses in the Session of Bulk Metallic Glasses VII: Alloy Development and Application II”, TMS 2010, Washington State Convention Center, 16 February 2010, Seattle, WA, USE.

384.

ZHENG, G.P., “Atomistic Simulations of Biocompatibility of Nanostructured Titanium and Magnesium”, The 1st Annual World Congress of Nanomedicine-2010, 2010, Beijing, China.

385.

ZHENG, G.P., “Mesoscopic Theory of Deformation and Shear Localization in Metallic Glasses”. Mater. Res. Soc. Symp (MRS Fall Meeting), 2010, Boston, USA.

386.

ZHANG, W.G., ZHOU, Y. and BAI, H.L., “Turbulent Drag Reduction using an Array of Piezo-Ceramic Actuators”, 17th Australasian Fluid Mechanics Conference, 5-9 December 2010, Auckland, New Zealand, pp.64 (CDROM).

387.

DU, C., ZHOU, Y. and MI, J., “Minijet-Controlled Turbulent Round Jet”, 17th Australasian Fluid Mechanics Conference, 5-9 December 2010, Auckland, New Zealand, pp.362 (CDROM).

388.

PIN, Y.F., ZHOU, Y., LIU, Y. and WANG, X.W., “Effect of Clearance on the Flow Structure behind a 3d Ahmed Vehicle Model”, Proceedings of 4th International Conference from Scientific Computing to Computational Engineering (4th IC-SCCE), 7-10 July 2010, Athens, Greece, ISBN: 978-960-98941-4-2, pp.222-231.

389.

DU, C., ZHOU, Y. and MI, J.C., “Microjet-Controlled Turbulent Round Jet”, Proceedings of the 10th Asian Symposium on Visualization, 1-5 March 2010, Chennai, India, pp.123-139.

390.

CHAN, P.K.L., “Transport Properties of Pr0.7Ca0.3MnO3/Nb:SrTiO3 Heterojunctions.” MRS Fall 2009, 2009, Boston, MA.

391.

CHAN, P.K.L., “Seebeck Coefficient on Rubrene Single Crystal Field Effect Transistors with PDMS as Gate Insulator.” MRS Fall 2009, 2009, Boston, MA.

392.

CHAN, P.K.L., “Fabrication of Silver Nanoparticles on Thin Film Electrodes for Photovoltaic Cell.” MRS Fall 2009, 2009, Boston, MA.

393.

CHAN, P.K.L., “Investigating of the PCMO Resistance Switching Devices by High Resolution Thermal Imaging Method.” MRS Fall 2009, 2009, Boston, MA.

394.

CHAN, P.K.L., “Temperature Modulation Spectroscopy for Probing Excitonic Properties of Organic Semiconductors.” MRS Winter 2009, 2009, San Francisco, CA.

395.

CHAN, P.K.L., “Thermal Characterization of Organic Light Emitting Devices.” 14th Opto Electronics and Communications Conference (OECC), 2009, Hong Kong.

396.

HUANG, J.F., CHAN, T.L. and ZHOU, Y., “Flow Structures, and Pollutant Dispersion and Concentration from a Queue of Studied Model Vehicles”. Proceedings of 17th Transport and Air Pollution Symposium and 3rd Environment and Transport Symposium, 2-4 June 2009, Toulouse, France.

397.

ZHOU, C., CHENG, L. and SU, Z., “Quantifying Orientation-Specific Damage Using Diagnostic Imaging”. In Structural Health Monitoring from System Integration to Autonomous Systems – Proceedings of the 7th International Workshop on Structural Health Monitoring (IWSHM-7), 9-11 September 2009, Stanford, CA., USA, ISBN: 978-1-60595-007-5, pp.1240-1247.

398.

CHEUNG, C.S., LEUNG, C.W. and LI, H.B., “Effect of Burner Diameter on Heat Transfer and CO Emissions”. Proceedings of the 7th Asia-Pacific Conference on Combustion, 24-27 May 2009, Taipei, Taiwan.

399.

CHEUNG, C.S., CHENG, C.H., ZHANG, Z.H., CHAN, T.L. and YAO, C.D., “Reducing Emissions of Diesel Engine Using Biodiesel and Methanol”. Proceedings of the First International Conference on Applied Energy, 2009, Hong Kong, CDRom pp.061.

400.

CHEUNG, C.S., TSANG, K.S., YUEN, D., “Investigation on the Performance of a Burner Operating on a Mixture of Methanol and Water”. Proceedings of the First International Conference on Applied Energy, 2009, Hong Kong, CDRom pp.062.

401.

CHEUNG, C.S., ZHANG, Z.H., CHAN, T.L. and YAO, C.D. “Low Emissions from a Diesel Engine with Diesel/Methanol Compound Combustion and Diesel Oxidation Catalyst.” Proc. of the 7th Asia-Pacific Conference on Combustion, 24-27 May 2009, Taipei, Taiwan.

402.

ZHU, L., CHEUNG, C.S. and HUANG, Z., “NOx and Particulate Emissions of a Diesel Engine Operating on Biodiesel and Biodiesel Blended with Ethanol and Methanol”. Proceedings of the 7th Asia-Pacific Conference on Combustion, 2009, Taipei, Taiwan, CDRom pp.10062.

403.

LU, Z.B. and CHENG, L., “Active Manipulation of Flow-Induced Acoustic Resonance”. Active-09, 20-22 August 2009, Ottawa, Canada, pp.Ac-09-854.

404.

WANG, C.Q., CHENG, L. and PAN, J., “Cavity-Backed Microperforated Panel Sound Absorbers”. Inter-Noise 2009, 23-26 August 2009, Ottawa, Canada, pp.09-041.

405.

PENG, S.Z., CHENG, L., HUANG, L.X., PENG, Z.X. and LI, L., “Improved Acoustical Wave Propagator Tech-Nique for Acoustic-Structure Interaction in a Duct Silencer Structure With/Without Membrane”. 16th International Congress on Sound and Vibration, 5-9 July 2009, Krakow, Poland, pp.883.

406.

LI, D.Y. and CHENG, L., “Controllability of Noise Transmission through Double-Glazed Windows Using Acoustic Resonators”. 16th International Congress on Sound and Vibration, 5-9 July 2009, Krakow, Poland, pp.883.

407.

CHOY, Y.S. and LUI, W.K., “Urban Soundscape of Recreation Area in Hong Kong”. Inter-Noise 2009, 23-26 August 2009, Ottawa, Canada.

408.

CHOY, Y.S., LAU, K.T. and HUI, D., “Composite Panel of Low Frequency Noise Reduction in Air-Moving Duct”. ICCE-17, 26 July - 1 August 2009, Hawaii, USA.

409.

CHAN, W.L., FU, M.W. and LU, J., “Size Effect on Micro-Deformation Behaviors in Microforming”. AMPT, 26-29 October 2009, KL, Malaysia.

410.

CAO, D.X., RAMANI, K., FU, M.W. and ZHANG, R.L., “Port-Based Ontology Semantic Similarities for Module Concept Creation”. Proceedings of the ASME 2009 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC/CIE 2009, 3 August - 6 September 2009, San Diego, CA, USA.

411.

CHUNG, S.H. and FUNG, E.H.K., “Modeling Piezoelectric Tube Scanner with Hysteresis and Creep by Finite Element Method”. Proceedings of the 2009 ASME International Mechanical Engineering Congress and Exposition, 2009, Lake Buena Vista, FL, U.S.A., pp.IMECE-10139.

412.

FUNG, E.H.K., WONG, W.O. and ZHU, M., “An On-Machine Separation Method for Straightness, Yawing and Rolling Errors of a Linear Slide”. Proceedings of the 2009 ASME International Mechanical Engineering Congress and Exposition, 2009, Lake Buena Vista, FL, U.S.A., pp.IMECE-10438.

413.

FUNG, E.H.K., CHENG, L., WONG, Y.K., ZHANG, X.Z., YUEN, C.W.M. and WONG, W.K., “Modeling, Design and Analysis of a Robot System for Garment Inspection”. Proceedings of the 2009 ASME International Mechanical Engineering Congress and Exposition, 2009, Lake Buena Vista, FL, U.S.A., pp.IMECE-10448.

414.

FUNG, E.H.K., WONG, Y.K., YUEN, C.W.M. and WONG, W.K., “Model Reference Adaptive Control of a Three DOF Garment Hanger”. Proceedings of the 22nd Canadian Congress of Applied Mechanics, 2009, Halifax, NS, Canada, pp.248-249.

415.

JING, X.J., et al, “Processing of Proprioceptive Inputs in the Locust: Quantitative Analysis of the Responses of Spiking Local Interneurones in the Metathoracic Ganglion”. Poster in the 8th Gottingen Meeting of the German Neuroscience Society, 25-29 March 2009.

416.

LAM, K., LIN, Y.F., ZOU, L. and LIU Y., “The Effect of Wavy Surface on Vortex Shedding from an Inclined Cylinder in Turbulent Flow”. The Nineteenth (2009) International Offshore and Polar Engineering Conference, 21-26 June 2009, Osaka, Japan, ISBN: 978-1-880653-53-1.

417.

ZHEN, H.S., LEUNG, C.W. and CHEUNG, C.S., “Comparison of Two Swirl-Stabilized Flames: Premixed Flame and Inverse Diffusion Flame”. Proceedings of the 7th Asia-Pacific Conference on Combustion, 24-27 May 2009, Taipei, Taiwan.

418.

LEUNG, C.W., LI, H.B. and CHEUNG, C.S., “Thermal Characteristics of a Premixed Impinging Flame at Different Impingement Plate Temperature”. Proceedings of the 7th Asia-Pacific Conference on Combustion, 24-27 May 2009, Taipei, Taiwan.

419.

LUO, D.D., LEUNG, C.W. and CHEUNG, C.S., “Visualization Studies of Premixed Impinging Flames with Induced Swirl”. Proceedings of the 7th Asia-Pacific Conference on Combustion, 24-27 May 2009, Taipei, Taiwan.

420.

LEUNG, R.C.K., SEID, K.H. and LI, E.X.J., “Numerical Prediction of the Effectiveness of Noise Barrier Design”. In Hong Kong Institute of Acoustics, ed., Effective Noise Control Policies for Metropolis, 24 July 2009, Hong Kong.

421.

LI, E.X.J., SEID, K.H. and LEUNG, R.C.K., “Prediction of Noise Propagation in City Street Canyons Using Computational Environmental Acoustics Method”. The Second International Symposium on Computational Mechanics (ISCM II), 29 November - 3 December 2009, Hong Kong and Macau, pp.577.

422.

YU, S.F., LEUNG, R.C.K., “Wall Boundary Condition fro FDLBM Direct Aeroacoustic Simulation”. The Second International Symposium on Computational Mechanics (ISCM II), 29 November – 3 December 2009, Hong Kong and Macau, pp.574.

423.

HUNG, W.T., NG, C.F., WONG, W.G., LAW, M.M.K., HO, K.Y. and LEUNG, R.C.K., “Development of CPX Technique in Measuring Tyre/Road Noise in Hong Kong”. Inter‐Noise 2009, 23‐26 August 2009, Ottawa, Canada, pp.539.

424.

LEUNG, W.W.F., HUNG, C.H. and YUEN, P.T., “Fabrication and Performance Evaluation of Nanofibrous Filters for Filtration of Submicron Aerosols”. Filtech, 13-15 October 2009, Wiesbaden, Germany.

425.

FU, S.C., SO, R. and LEUNG, W.W.F., “A Discrete Flux Scheme for Aero- and Hydrodynamic Flow Problems”. 18th Int. Conf. on Discrete Simulation of Fluid Dynamics, 6-10 July 2009, Beijing, China.

426.

LEUNG, W.W.F. and HUNG, C.H., “Performance Evaluation of Nanofibrous Filters for Filtration of Submicron Aerosols”. Nanofibers for the 3rd Millennium, 11-12 March 2009, Prague, Czech Republic, pp.160-164.

427.

LIU, Y.X., LIU, Y., LUO, H.Y. and WONG, M.C.M., “The Effect of Unsteadiness on Particle Deposition in Human Upper and Lung Airways”. 2nd Aachen Symposium on Natural and Artificial Respiration, 23-24 November 2009, Aachen, Germany.

428.

HUA, S., WANG, J.F., LIU, Y. and XU, Y.S., “Optimum Disturbance Pattern to Enhance Flow Oscillation and Chaotic Strength in a 3D Micro Mixer”. The 6th International Conference for Mesoscopic Methods in Engineering and Science, 13-17 July 2009, Guangzhou, China.

429.

LUO, H.Y., LIU, Y.X. and LIU, Y., “Modeling Respiratory Flow in a CT-Scanned Upper and Lung Airway”. Proceedings of the first International Conference on Mathematical and Computational Biomedical Engineering, 29 June – 01 July 2009, Swansea, UK, pp.88-89.

430.

LIU, Y., WANG, J.F. and XU, Y.S., “Optimum Disturbance Pattern in Micro Mixer”. Proceedings of Conference on Advances in Microfluidics and Nanofluidics, 5-7 January, 2009, Hong Kong.

431.

SHI, S.Q., GUO, X.H., XIAO, Z.H. and WOO, C.H., “Phase-Field Modeling of Microstructure Evolution in Nuclear Materials”. 20th International Conference on Structural Mechanics in Reactor Technology (SMiRT 20), 9-14 August 2009, Helsinki, Finland.

432.

SHI, S.Q., “Modeling of Hydrogen Damage in Materials”. Keynote Talk at China 2009 Environmental Induced Fracture Conference, 27-30 July 2009, Xining, Qinghai, China.

433.

SHI, S.Q., LIU, W.C. and MENG, F.Y., “Mechanical Behavior of Carbon Nanotube Junctions”. New Diamond and Nano Carbon Conference (NDNC 2009), 7-12 June 2009, Traverse City, Michigan.

434.

LIU, W.C., MENG, F.Y. and SHI, S.Q., “Tensile Deformation Behavior of Carbon Nanotube Junctions” At Nanotech 2009, 3-7 May 2009, Houston, Texas, USA.

435.

LIU, W.C., MENG, F.Y. and SHI, S.Q., “Mechanical Stability of Carbon Nanotube Junctions”. The 13th Annual Conference of Hong Kong Society of Theoretical and Applied Mechanics/The 5th Jiangsu-Hong Kong Forum on Mechanics and Its Applications, 15-16 March 2009, Hong Kong/Macau.

436.

CHEN, J., SU, Z. and CHENG, L., “Influence of Media Coupling on Lamb Waves in Bone Phantoms”. In Proceedings of the 4th Asia-Pacific Conference on Biomechanics (AP Biomech 2009, A supplement of Journal of Biomechanical Science and Engineering), 14-17 April 2009, Christchurch, New Zealand, pp.236-237.

437.

LU, Y., YE, L., WANG, D., WANG, X. and SU, Z., “Lamb Wave Signals for Damage Detection Using a Probability-Based Imaging Algorithm”. In Structural Health Monitoring from System Integration to Autonomous Systems – Proceedings of the 7th International Workshop on Structural Health Monitoring (IWSHM-7), 9-11 September 2009, Stanford, CA., USA, ISBN: 978-1-60595-007-5, pp.1272-1279.

438.

CHEN, J.G., SU, Z.Q. and CHENG, L., “Exploring Influence of Coupled Fluid Layer on Propagation of Lamb Waves in Bone Phantoms: Modellind and Experiments”. Third International Conference on Mechanics of Biomaterials and Tissues, 13-17 December 2009, Florida, USA.

439.

SU, Z. and CHENG, L., “Moving Forward: From Damage Detection to Structural Health Monitoring”. JSAEM Studies in Applied Electromagnetics and Mechanics (V13) - Proceedings of the 14th International Symposium on Applied Electromagnetics and Mechanics (ISEM-14), 20-24, September, 2009, Xi'an, P. R. China, ISBN: 978-4-931455-14-6, pp.597-598.

440.

VYAS, A. and LI, K.Y., “Mechanical and Tribological Properties of Nanostructured Cr-C-Nx Films Grown at Varying Nitrogen Concentration”. IIP/ISPS Joint MIPE2009, 17-20 June 2009, Tsukuba International Congress Center, Ibaraki, Japan.

441.

WONG, M.C., WONG, T.T. and LEUNG, C.W., “Modeling of Impinging Premixed Multi-Slot Jet Efficiency and Greenhouse Gas Emissions”. Proceedings of the 7th Asia-Pacific Conference on Combustion, 24-27 May 2009, Taipei, Taiwan.

442.

YANG, Y., “Two Dimensional Nanoindentation of Bulk Metallic-Glasses”. International Conference on Advanced High-Temperature and High-Strength Structural Materials (HTHSSM), 5 October 2009, the Hong Kong Polytechnic University, Hong Kong.

443.

YANG, Y., “Size Rffects on Plasticity in Bulk-metallic Glasses at Room Temperature: Shear-Banding Versus Homogeneous Deformation under Compressive Loading”. The 16th International Symposium on Metastable, Amorphous and Nanostructured Materials, 6 July 2009, BUAA, Beijing, China.

444.

LU, M.Y., LU, X., ZHOU, L.M., SU, Z. and YE, L., “Guided-Wave-Based Detections of Weld and Crack in Steel Plates”. In Proceedings of the SPIE (Vol.: 7493, Proceedings of the 2nd International Conference on Smart Materials and Nanotechnology in Engineering (SMN2009)), 8-11 July 2009, Weihai, P. R. China, ISBN: 978-0-81947-804-7, pp.74932S-74932S-8.

445.

LY, X., LU, M., ZHOU, L.M., SU, Z., CHENG, L., YE, L. and MENG, G., “Guided Wave Propagation Based Damage Detection in Welded Rectangular Tubular Structures”. In Proceedings of the SPIE (Vol.: 7493, Proceedings of the 2nd International Conference on Smart Materials and Nanotechnology in Engineering (SMN2009)), 8-11 July 2009, Weihai, P. R. China, ISBN: 978-0-81947-804-7, pp. 749313-749313-8.

446.

LU, M.Y.¬¬¬, LI, Y.L., TAN, H.F. and ZHOU, L.M., “Membrane Wrinkling Patterns and Control with SMA and SMPC Actuators”. International Conference on Smart Materials and Nanotechnology in Engineering (SMN) 2009, July 2009, Weihai, China.

447.

HUANG, C.J., ZHOU, L.M. and HUANG, H.T., “Formation of Bamboo-Shoot-Like Structures in H3PO4/HFelectrolyte”. EMRS, 8-12 June 2009, Strasburg, France.

448.

BAI, H.L. and ZHOU, Y., “Active Control of Turbulent Boundary Layer
Using an Array of Piezo-ceramic Actuators”. Proceedings of 10th International Conference on Fluid Control, Measurements, and Visualization, 17-21 August 2009, Moscow, pp.159 (CDROM).

449.

BAI, H.L. and ZHOU, Y., “Active Control of Turbulent Boundary Layer Using an Array of Piezo-ceramic Actuators”. In: Bruno Echhardt (ed.) Advances in Turbulence XII, Proceedings of the 12th EUROMECH European Turbulence Conference, 7-10 September 2009, Marburg, Germany, pp. 201-204.

450.

RINOSHIKA, A., ZHOU, T.M. and ZHOU, Y., “Wavelet-Decomposed Three Vorticity Components in a Turbulent near Wake”. Sixth International Symposium on Turbulence and Shear Flow Phenomena (TSFP6), 22-24 June 2009, Seoul, Korea. pp.tsfp6-069.

451.

ALAM, M.M. and ZHOU, Y., “Cylinder Vibration Excitated by Shear Layers from an Upstream Cylinder”. Sixth International Symposium on Turbulence and Shear Flow Phenomena (TSFP6), 22-24 June 2009, Seoul, Korea, pp.tsfp6-051.

452.

YU, G.H. and CHENG, L. “Location Optimization of a Long T-shaped Acoustic Resonator Array in Noise Control of Enclosures by Simulated Annealing Algorithm”. INTER-NOISE 2008, 26- 29 October, 2008, Shanghai, China, pp.0467.

453.

LI, D.Y. and CHENG, L., “Vibroacoustic Coupling of a Cavity Backed by Two Parallel Flexible Plates”. INTER-NOISE 2008, 26-29 October, 2008, Shanghai, China, pp.0503.

454.

LI, D.Y., VIPPERMAN, J.S. and CHENG, L., “Noise Control in a Small Enclosure Using T_shaped Acoustic Resonators”. Noise-Con 2008 and the Sound Quality Symposium 2008, 30th Annual Conference of ASME’s Noise Control and Acoustics Division (NCAD), 28-31 July 2008, Dearborn, Michigan, USA.

455.

ZHANG, M.M., CHENG, L. and ZHOU, Y., “Active Perturbation on Vortes-induced Acoustic Resonance”. Acoustics’08, Acoustical Society of American, 29 June-4 July 2008, Paris, France.

456.

CHEUNG, C.S., CHENG, C.H., ZHANG, Z.H., “Comparison on the Effect of Fumigation Methanol and Blended Dimethyl Carbonate on Emissions of a Direct-injection Diesel Engine”. Proceedings of the Ninth Asia-Pacific International Symposium on Combustion and Energy Utilization, 2-6 November 2008, Beijing, pp.411-416.

457.

TSANG, K.S., CHEUNG, C.S., HUNG, W.T., “Effect of Vehicle Speed and Driving Modes on Fuel Consumption and Emissions of a Low-emission Car”. Proceedings of the Ninth Asia-Pacific International Symposium on Combustion and Energy Utilization, 2-6 November 2008, Beijing, pp.461-469.

458.

CHEUNG, C.S., TSANG, K.S., HUNG, W.T., “Investigating On-road Fuel Consumption and Emissions of a Low-emission Car”. Proceedings of the 13th International Conference of Hong Kong Society for Transportation Studies: Transportation and Management Science, 13-15 December 2008, Hong Kong, pp.311-319.

459.

CHAU, C.W., CHOY, Y.S., LAU, K.T. and LIU, Y., “Noise Reduction by Composite Panel”. International Conference on Multi-function Materials and Structures 2008, 28-31 July 2008, Hong Kong, China.

460.

CHOY, Y.S. and HUANG, L., “Sound Propagation and Low Frequency Noise Absorption by Helium-filled Porous Material”. Symposium on the Acoustics of Poro-Elastic Materials, 17-19 December 2008, University of Bradford, Bradford, West Yorkshire, U.K.

461.

CAO, D.X., FU, M.W., GU, Y.M. and JIA, H.P., “Port-based Ontology Modeling for Product Conceptual Design”. Proceedings of the ASME 2008 International Design Engineering technical Conferences and Computers and Information in Engineering Conference, 2008, New York, USA.

462.

FU, M.W., LU, J. and CHAN, W.L., “Simulation-based Metal-formed Product Design and Development Paradigm”. 8thAPCMP, 15-20 June 2008, Guilin, China.

463.

FU, M.W. and LU, J., “Deformation Behaviors Investigation of Microforming via Experiment and CAE Simulation”. 8thAPCMP, 15-20 June 2008, Guilin, China.

464.

CHAN, W.L., FU, M.W., LU, J., “Study on Residual Stress for Supporting Metal-formed Product Development via CAE Simulation”. 8thAPCMP, 15-20 June 2008, Guilin, China.

465.

WANG, G.C., FU, M.W., CAO, C.X., DONG, H.B. and GENG, Q.D., “Research on Superplasticity Deformation of Ti-alloy Ti-6Al-2Zr-1Mo-1V”. 8thAPCMP, 15-20 June 2008, Guilin, China.

466.

WANG, K.L., LU, S.Q., LI, X., FU, M.W. and YANG, H.J., “Optimal Determination of (α+β) Forging Process Parameters of Titanium Alloy based on P-maps”. 8thAPCMP, 15-20 June 2008, Guilin, China..

467.

YAU, D.T.W., FUNG, E.H.K. and WONG, Y.K., “H-Infinity Frequency-Domain Identification of Flight Control System”. Proceedings of the 2008 ASME International Mechanical Engineering Congress and Exposition, Boston, MA, U.S.A., 13 October-6 November 2008, Paper No. IMECE-67146.

468.

LAM, K., LIN, Y.F., ZOU, L., CAI, T., and LIU, Y., “Investigation of Flow Characteristics in Heat Exchanger Tube Bundles Composed of Wavy and Circular Cylinders”. The 9th International conference on Flow-Induced Vibrations (FIV2008), Prague, Czech Republic, 30 June - 3 July 2008.

469.

LAM, K. and ZOU, L., “The Effects of Aspect Ratio and End Condition on the Control of Free Shear Layers Development and Force Coefficients for Flow past Four Cylinders in the In-line Square Configuration”. J.F. Morrison et al. (eds.), IUTAM Symposium on Flow Control and MEMS Springer IUTAM Bookseries, 2008, Vol. 7, pp.409-413. (ISBN: 978-1-4020-6857-7)

470.

LAM, K. and LIN, Y.F., “Numerical Simulation on the Control of Drag Force and Vortex Formation by Different Wavy (varicose) Cylinders”. J.F. Morrison et al. (eds.), IUTAM Symposium on Flow Control and MEMS Springer IUTAM Bookseries, 2008, Vol. 7, pp.415-419,(ISBN: 978-1-4020-6857-7)

471.

ZHAO, Y.Q., LAU, K.T., LI, H.L., “A Potential Bio-engineered Materials Based on Nano-diamond and Poly(Lacti Acid)”. International Conference on Multi-functional Materials and Structures, Hong Kong, 28-31 July 2008.

472.

CHAN, M.L., LAU, K.T, HO, M.P. and WONG, T.T., “Preliminary Study on a High Strength Nanoclay/Epoxy Coating for Ocean Engineering Applications”. International Conference on Multi-functional Materials and Structures, Hong Kong, 28-31 July 2008.

473.

YIN, Y.S., CHENG, S., LAU, K.T., CHEN, S.G. and LIU, T., “The Influence of the Marine Bacterium Vibrio Natriegeus Growth on Metallic Corrosion as Studied by Microscope Technologies”. International Conference on Multi-functional Materials and Structures, Hong Kong, 28-31 July 2008.

474.

LIU, T, LAU, K.T., CHEN, S.G., CHENG, S. and YIN, Y.S., “Super-hydrophobic Surfaces Improve Corrosion Resistance of Fe3Al-type Intermetallic in Seawater”. International Conference on Multi-functional Materials and Structures, Hong Kong, 28-31 July 2008.

475.

CHEN, S.G., CHENG, S., LAU, K.T., and YIN, Y.S., “Quantum Chemical and Electrochemical Studies on the Inhibitive effect of Carboxymenthylchitosan for Mild Steel in different pHs”. International Conference on Multi-functional Materials and Structures, Hong Kong, 28-31 July 2008.

476.

CHIPARA, M., BRITTAIN, W., LAU, K.T., CHIPARA, D.C., “Polycarbonate-Carbon Nanofibers Composites: An Electron Spin Resonance Study”. International Conference on Multi-functional Materials and Structures, Hong Kong, 28-31 July 2008.

477.

LAU, K.T., “Optimal Mechanical Properties of Nanotube-related Polymer Composites”. International Forum on Advanced Material Science and Technology (IFAMST), Hong Kong, 12-14 June 2008.

478.

CHEUNG, H.Y., LAU, K.T., ZHAO, Y.Q. and LU, J., “Tensile Properties of Different Silkworms Silk Fibers”. International Conference on Multi-functional Materials and Structures, Hong Kong, 28-31 July 2008.

479.

ZHAO, Y.Q., LAU, K.T., LIU, .T, CHENG, S., LAM, P.M. and LI H.L., “Biocomposites made from Biodegradable Poly (latic acid) and Keratin Fibers obtained from Chicken Feathers”. International Conference on Multi-functional Materials and Structures, Hong Kong, 28-31 July 2008.

480.

ZHEN, H.S., LEUNG, C.W. and CHEUNG, C.S., “Thermal and Emission Characteristics of a Turbulent Inverse Diffusion Flame with Induced High-swirl”. Proceedings of the Ninth Asia-Pacific International Symposium on Combustion and Energy Utilization, Beijing, 2-6 November 2008, pp.46-55.

481.

LAM, G.C.Y., LEUNG, R.C.K., TANG, S.K. and YU, K.F., “Simulation of Duct Aeroacoustics with Flow Discontinyity Using CE/SE Method”. 15th International Congress on Sound and Vibration, 6-10 July 2008, Daejeon, Korea.

482.

LAM, G.C.Y., LEUNG, R.C.K., YU, K.F. and TANG, S.K., “Computational Duct Aerocaoustics Using CE/SE Meethod”. 14th AIAA/CEAS Aeroacoustics Conference, 5-7 May 2008, Vancouver, British, Columbia, Canada.

483.

LAM, G.C.Y., LEUNG, R.C.K., TANG, S.K. and YU, K.F.M “Simulation of Duct Aeroacoustice with Flow Discontinuity Using CS/SE Method”. 37th International Congress and Exposition on Noise Control Engineering, 26-29 October 2008, Shanghai, China.

484.

HIRAISHI, M., TSUTAHARA, M. and LEUNG, R.C.K., “Numerical Simulation of Sound Generation in a Mixing Layer by the Finite Difference Lattice Boltzmann Method”. International Conference on Mesoscopic Methods in Wngineering and Science, 16-20 June 2008, Amsterdom, The Netherlands.

485.

LEUNG, R.C.K., SO, R.M.C. and KAM, E.W.S., “Calculation of Sound Scattering by a Vortex Using Modeled Boltzmann Equation”. International Conference on Mesoscopic Methods in Wngineering and Science, 16-20 June 2008, Amsterdom, The Netherlands.

486.

LEUNG, W.W.F., “Flow Non-Equilibrium Thin-Film flow in Rotating Disk and Cone”. Int. Mech. Eng. Congress & Expo., 2008, Boston, MA, pp.2008-67995.

487.

FU, S.C., LEUNG, W.W.F., SO, R.M.C., “Numerical Method Based on Lattice Boltzmann Method for Microchannel Flows”. Int. Mech. Eng. Congress & Expo., 2008.

488.

LEUNG, W.W.F., “Centrifugal Separation in Biotechnology”. Keynote Speech, American Filtration & Separations Society Annual Conference, 20-22 May 2008, Valley Forge, PA, USA.

489.

CHEN, X.Y., LIU, Y., YANG, J.M. and FAN, J.T., “Effect of Boundary Treatment on Particle Suspension in Molecular Dynamics Simulation”. Abstract of the 2nd International Symposium on Physics of Fluids, 2008, Nanjing.

490.

XU, Y.S., LIU, Y., LIN, J. and WU, F.M., “Lattice Boltzmann Simulation for Various Geometries of Solid Oxide Fuel Cells”. Abstract of the 2nd International Symposium on Physics of Fluids, 2008, Nanjing.

491.

CHEN, X.Y., LIU, Y., FU, B.M., FAN, J.T. and YANG, J.M., “MD Simulation of Colloidal Particles Transportation in a Fiber Matrix”. International Conference on Computational & Experimental Engineering and Sciences, Hawaii, USA, March 2008, pp.16-22.

492.

LUO, H.Y., LIU, Y., ZHANG, C.N. and WONG, M.C.M., “Simulation of Medicine Particle Delivery in CT-scanned Human Lung Model”. International Symposium on Biological and Physiological Engineering / The 22nd SICE Symposium on Biological and Physiological Engineering, Harbin, China, 13-14 January 2008, pp.181-184.

493.

LI, B.Q., LIU, Y., LAM, K., LI, W.J., and CHU, J.R., “Control of Flow-Induced Vibration of Two Side-by-Side Cylinders Using Micro Actuators”. IUTAM Symposium on Flow Control and MEMS, edited by Morrison, Birch and Lavoie, Springer, The Netherlands, 2008, ISBN 978-1-4020-6857-7, pp.387-392.

494.

SHI, S.Q., “An Elastoplastic Phase-field Model for Microstructure Evolution”. International Conference of Theoretical and Applied Mechanics, Adelaide, Australia, 24-29 August 2008.

495.

SHI, S.Q., “Phase-field Models for Microstructure Evolution in Nuclear Materials”. The 6th International Forum on Advanced Material Science and Technology, Hong Kong, China, 12-14 June 2008.

496.

SHI S.Q., “Elastoplastic phase-field model for time-dependent hydrogen diffusion, hydride precipitation and fracture in Zr”. The 2nd International Conference on Heterogeneous Materials Mechanics, Huangshan, China, 3-8 June 2008.

497.

SHI, S.Q., “Elastoplastic phase-field model for time-dependent hydrogen diffusion, hydride precipitation and fracture in Zr”. International Workshop on Hydrogen Embrittlement in Metals, Mumbai, India, 18-20 February 2008

498.

SHI, S.Q., “Computer Modeling of Hydrogen Damage in Materials”. The 8th International Conference on Fundamentals of Fracture, Hong Kong and Nansha, China, 3-7 January 2008.

499.

WANG, X.M., SU, Z.Q. and CHENG, L., “Data Fusion Schemes in Damage Detection: Evaluation and Comparison”. 2nd Asia-Pacific Workshop on Structural Health Monitoring, 2-4 December 2008, Melbourne Australia.

500.

LAU, E., NGAN, R.W. and WONG, E.T.T., “Wavelet Packet Transform for Motor Current Signature Analysis”. 14th ISSAT International Conference on Reliability and Quality in Design 2008, Florida, USA, August 2008, pp. 54-58.

501.

WONG, W.O., “Critical Speed Determination of Rotating Structures with an Optical Technique”. Proceedings of the IMAC-XXVI: A Conference & Exposition on Structural Dynamics, 4-7 Februday 2008, Orlando, Florida USA, pp.316.

502.

CHEUNG, Y.L. and WONG, W.O., “Optimization of Dynamic Vibration Absorbers for Vibration Suppression in Plates”. Proceedings of the IMAC-XXVI: A Conference & Exposition on Structural Dynamics, 4-7 February 2008 Orlando, Florida USA, 317.

503.

MI, J., CAO, Y., and ZHOU, Y., “Jet Flames under Perturbation of Side Mini-Jets”. Proceedings of 9th Asia-Pacific International Symposium on Combustion and Energy Utilization, Beijing, 2-6 November 2008, ISBN 978-7-5062-9284-9, pp. 28-34.

504.

WANG, H.F., ZHOU, Y. and ZHOU, T.M., “3D Three-dimensional Flow Measurement behind a Finite-length-cylinder Wake”. Fifth Australian Conference on Laser Diagnostics in Fluid Mechanics and Combustion, Perth, Australia, 3-4 December 2008, pp. 47 – 50.

505.

ALAM, M.M., ZHOU, Y. and YANG, H., “Aerodynamics of an Airfoil at Ultra-low Reynolds Number”. ITI Conference on Turbulence, 12-15 October 2008, Bertinoro, Italy.

506.

ALAM, M.M. and ZHOU, Y., “Classification of the Wake of Two Side-by-side Square Cylinders”. Proceedings of The 9th International Conference on Vortex-Induced Vibration (FIV2008), Prague, Czech Republic, 30 June – 3 July 2008, pp. 829-834.

507.

WANG, H.F. and ZHOU, Y., “Near Wake Structure of a Wall-mounted Finite-length Square Cylinder”. Proceedings of The 9th International Conference on Vortex-Induced Vibration (FIV2008), Prague, Czech Republic, 30 June – 3 July 2008, pp. 865-870.